Shop by category
Shop all componentsOhm’s law & basics
Output voltage is read between the two divider midpoints; it is positive when Rx is above the balanced value.
Balanced when R1 ÷ R2 = R3 ÷ Rx, so Rx = R3 × R2 ÷ R1V out = Vs × (Rx ÷ (R3 + Rx) − R2 ÷ (R1 + R2))With R1 = R2 = R3 = 1 kΩ, a balanced bridge means Rx = 1 kΩ. If Rx changes to 1.1 kΩ (+10%) with a 5 V supply, the output is 5 × (1100 ÷ 2100 − 0.5) = 0.119 V.
A Wheatstone bridge compares two voltage dividers. When they are balanced the output is exactly zero, no matter what the supply voltage is, which makes it a very accurate way to find an unknown resistance.
Load cells, strain gauges and many pressure sensors are Wheatstone bridges whose output changes by only a few millivolts, so they are read with an amplifier such as the HX711.
When R1 ÷ R2 = R3 ÷ Rx. The output voltage is then zero.
Measuring small resistance changes, as in strain gauges and load cells.
Load cells give only a few millivolts, so they need an amplifier such as the HX711.
Balanced when R1 ÷ R2 = R3 ÷ Rx, so Rx = R3 × R2 ÷ R1; V out = Vs × (Rx ÷ (R3 + Rx) − R2 ÷ (R1 + R2)).
With R1 = R2 = R3 = 1 kΩ, a balanced bridge means Rx = 1 kΩ. If Rx changes to 1.1 kΩ (+10%) with a 5 V supply, the output is 5 × (1100 ÷ 2100 − 0.5) = 0.119 V.
Geekobot builds that use it include Servo kitchen scale dial, Why things feel lighter in water, Scale fill ring and Parcel weight limit voice. Each has the full parts list, wiring and code.
Results are estimates for design and learning. Check critical designs against the component datasheet. Made by the Geekobot Learning Team. How we write our calculators