How-to · Beginner · 3 min read
Aluminium Extrusion Profiles
2020, 3030 and 4040 T-Slot and V-Slot Explained
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
Aluminium extrusion is a slotted profile you bolt together to build frames. The numbers give the size in millimetres: 2020 is 20 by 20 mm, 3030 is 30 by 30 mm. Use 2020 for printers and light frames, 3030 or 4040 for CNC and heavier machines. Match T-nuts to the slot, use corner brackets for squareness, and tighten in a flat jig.
Key specs at a glance
- Sizes
- 2020, 2040, 3030, 3060, 4040 and larger
- Slot type
- T-slot (flat sides) or V-slot (V grooves for wheels)
- Slot width
- About 6 mm on 2020 and 8 mm on 3030 and 4040
- Fasteners
- T-nuts (drop-in, slide-in or hammer head) with M4, M5 or M6 bolts
- Material
- 6063 aluminium alloy, usually anodised
- Joining
- Corner brackets, end-tap screws or internal connectors
T-slot vs V-slot
T-slot profiles are the standard for frames. V-slot profiles have angled grooves that let rollers or wheels ride on the surface, so they are used for linear motion on CNC and gantry machines.
| Profile | Use | Notes |
|---|---|---|
| 2020 T-slot | 3D printer frames, small enclosures, workbenches | Light and easy to cut |
| 2040 | Wider bases and gantries | Stiffer in one direction |
| 3030 / 3060 | Large printers, CNC frames, machine bases | Heavier, needs bigger brackets |
| 4040 | Workshop frames, large machines | Strong, common in industry |
| V-slot 2020 / 2040 | CNC and linear rails with V-wheels | Wheel profile must match |
- 2020 T-slot
- Use:
- 3D printer frames, small enclosures, workbenches
- Notes:
- Light and easy to cut
- 2040
- Use:
- Wider bases and gantries
- Notes:
- Stiffer in one direction
- 3030 / 3060
- Use:
- Large printers, CNC frames, machine bases
- Notes:
- Heavier, needs bigger brackets
- 4040
- Use:
- Workshop frames, large machines
- Notes:
- Strong, common in industry
- V-slot 2020 / 2040
- Use:
- CNC and linear rails with V-wheels
- Notes:
- Wheel profile must match
T-nuts and brackets
Match nuts to the slot width and bolt size. Drop-in T-nuts can be inserted anywhere, but slide-in nuts must be placed before the frame is closed. Spring-loaded nuts hold their position. Corner brackets, gusset plates and cast brackets keep joints square and add stiffness. Examples in the shop include T-nuts, brackets and hinges for 3030 profile.
Building a square frame
- 1Cut profiles square with a mitre saw and a metal blade, or buy them cut to length.
- 2Deburr the ends and wipe off the chips.
- 3Put T-nuts in loosely, then assemble on a flat surface.
- 4Tighten the bolts in a cross pattern and check diagonals are equal.
- 5For printers, check every corner with a square and tighten again after the first hours of use.
- 6Add braces or panels to reduce wobble; see 3D printer enclosures.
Strength and stiffness
Deflection depends strongly on the profile height. Doubling the height of a profile makes it many times stiffer. For long spans, use 3030 or 4040 or add a second profile as a brace. Keep heavy loads near the supports, and use more than one T-nut in each joint. Check the profile for twist before using it on a precision axis.
Try it: Length converter calculator
Change the values and the diagram and results update as you type.
Common mistakes to avoid
- Buying T-nuts that do not match the slot.
- Cutting profiles out of square.
- Forgetting the nuts inside a closed frame.
- Over-tightening and stripping the T-nut.
- Using 2020 for a heavy, long span.
Frequently asked questions
What does 2020 mean?
The profile is 20 mm by 20 mm.
Which is better, 2020 or 3030?
3030 is stiffer and heavier. 2020 is enough for most printers.
What nut for 2020?
M4 or M5 T-nuts, depending on the slot design. Check the manufacturer.
Can I cut it myself?
Yes, with a hacksaw or a chop saw with an aluminium blade. Deburr and clean afterwards.
What is the difference between T-slot and V-slot?
V-slot has V-shaped grooves for wheels. T-slot is flat for general building.
Parts for this guide
Calculators
Terms in this guide
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.




