Component guide · Intermediate · 6 min read
F7 and H7 Flight Controllers

SpeedyBee F7, Holybro Kakute F722 and H7, T-Motor F7 and H7 Mini, iFlight BLITZ F7 and H7, Flywoo GOKU F7, AxisFlying Argus, Zerodrag STRIX H7, DarkMatter BRAHMA F7 and RadioLink
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
F7 (STM32F722/F745) and H7 (STM32H743) flight controllers are faster than F4 boards and have more UARTs, which helps when a quad carries a digital VTX, GPS, ELRS receiver and LEDs at once. H7 boards also run ArduPilot well, so they suit long-range and autonomous builds. Many have plugs for DJI O3, Walksnail and HDZero digital systems.
Key specs at a glance
- Processor
- STM32F722, F745 (216 MHz) or H743 (480 MHz)
- Gyro
- MPU6000, ICM42688P, BMI270 (dual on some)
- UARTs
- 5 to 8
- Mounting
- 20x20, 30.5x30.5 or 35x35 mm
- Video
- Analog OSD plus digital VTX plugs
- Firmware
- Betaflight, iNav, ArduPilot (H7)
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1SpeedyBee F7 V3 Flight Controller₹7,042
Option 2SpeedyBee F7 Mini Flight Controller₹5,660
Option 3Holybro Kakute F722 Flight Controller₹5,509
Option 4Holybro Kakute H7 V1.5 Flight Controller₹10,419
Option 5Holybro Kakute H7 V2 Flight Controller₹8,986
Option 6Holybro Kakute H7 Mini 1.3V Flight Controller₹10,654
What the Betaflight F7 and H7 flight controllers is
F7 and H7 flight controllers use faster STM32 chips with more UARTs and memory, for complex FPV, long-range and ArduPilot or INAV builds.
Pick F7 for a feature-rich Betaflight quad and H7 for ArduPilot, large blackbox storage and the most UARTs. The T-Motor F7 Pro adds Wi-Fi and Bluetooth set-up.
DarkMatter BRAHMA F7, Zerodrag Warp F7 and STRIX H7 are designed and made in India.
Betaflight F7 and H7 flight controllers pinout
The pins on the Betaflight F7 and H7 flight controllers and what each one does.
| Pin | Function |
|---|---|
| ESC connector (8-pin) | Battery voltage, current, telemetry and motor signals from a 4-in-1 ESC |
| UARTs (T1/R1 ...) | Receiver (CRSF/SBUS), GPS, VTX control and telemetry |
| 5V / 9V / 10V pads | BEC outputs for receiver, camera and VTX |
| CAM / VTX pads | Analog video in and out through the OSD |
| Boot button and USB | Flashing firmware and configuration |
| Digital VTX plug | 6-pin for DJI O3, Walksnail or HDZero |
- ESC connector (8-pin)
- Battery voltage, current, telemetry and motor signals from a 4-in-1 ESC
- UARTs (T1/R1 ...)
- Receiver (CRSF/SBUS), GPS, VTX control and telemetry
- 5V / 9V / 10V pads
- BEC outputs for receiver, camera and VTX
- CAM / VTX pads
- Analog video in and out through the OSD
- Boot button and USB
- Flashing firmware and configuration
- Digital VTX plug
- 6-pin for DJI O3, Walksnail or HDZero
Wiring the Betaflight F7 and H7 flight controllers
Receiver TX goes to FC RX and receiver RX to FC TX. Always fit the VTX antenna before plugging in a battery, and use a smoke stopper for the first power-up.
| Betaflight F7 and H7 flight controllers pin | Connection | Note |
|---|---|---|
| 4-in-1 ESC | 8-pin harness | Check pin order |
| ELRS receiver | UART TX/RX crossed, 5V, GND | Serial RX = CRSF |
| VTX | 9V/10V, video out, UART for SmartAudio | Antenna on before power |
| GPS | Spare UART, 5V | For GPS rescue |
- 4-in-1 ESC
- Connection:
- 8-pin harness
- Note:
- Check pin order
- ELRS receiver
- Connection:
- UART TX/RX crossed, 5V, GND
- Note:
- Serial RX = CRSF
- VTX
- Connection:
- 9V/10V, video out, UART for SmartAudio
- Note:
- Antenna on before power
- GPS
- Connection:
- Spare UART, 5V
- Note:
- For GPS rescue
Example code
Use the 'Presets' tab for good starting tunes. iNav and ArduPilot run on many of these boards too; check the target list. For DJI O3 set the VTX UART to MSP DisplayPort.
1. Flash the right target in Betaflight Configurator (Firmware Flasher)
2. Ports tab: Serial RX on the receiver UART; GPS / VTX on their UARTs
3. Configuration: board orientation, ESC protocol DSHOT600, bidir DShot ON
4. Receiver tab: CRSF, check sticks move the right channels
5. Motors tab (props OFF): motor order and direction match the diagram
6. Modes: ARM on a switch, ANGLE / HORIZON, BEEPER, GPS RESCUE
7. OSD: battery voltage, RSSI/LQ, flight time
8. CLI: save, then a hover test outdoorsSetup and tuning
Betaflight for freestyle and racing, INAV for GPS missions, ArduPilot for autonomous craft.
list your devices (receiver, GPS, VTX control, digital HD unit) and map each to a UART.
feed the board from the ESC or a BEC with the right voltage; H7 boards may need clean 5 V for peripherals.
enable onboard flash or SD logging to tune filters and PIDs.
use the configurator's matching version and back up the CLI diff before flashing.
What you need
Shop this list20 of 20 found in our store · ₹1,61,111
SpeedyBee F7 V3 Flight Controller: the part this guide coversSpeedyBee F7 V3 Flight Controller₹7,042
SpeedyBee F7 Mini Flight Controller: another version this guide coversSpeedyBee F7 Mini Flight Controller₹5,660
Holybro Kakute F722 Flight Controller: another version this guide coversHolybro Kakute F722 Flight Controller₹5,509
Holybro Kakute H7 V1.5 Flight Controller: another version this guide coversHolybro Kakute H7 V1.5 Flight Controller₹10,419
Holybro Kakute H7 V2 Flight Controller: another version this guide coversHolybro Kakute H7 V2 Flight Controller₹8,986
Holybro Kakute H7 Mini 1.3V Flight Controller: another version this guide coversHolybro Kakute H7 Mini 1.3V Flight Controller₹10,654
Holybro Kakute H7 Mini V2 F7 Flight Controller: another version this guide coversHolybro Kakute H7 Mini V2 F7 Flight Controller₹8,986
T-Motor F7 Flight Controller F7: another version this guide coversT-Motor F7 Flight Controller F7₹9,019
T-Motor F7 HD Flight Controller F7 HD: another version this guide coversT-Motor F7 HD Flight Controller F7 HD₹8,973
T-Motor F7 Pro Full Function Flight Controller with WiFi & Bluetooth – 30.5×30.5mm: another version this guide coversT-Motor F7 Pro Full Function Flight Controller with WiFi & Bluetooth – 30.5×30.5mm₹11,649
T-Motor MINI F7 Flight Controller Mini F7: another version this guide coversT-Motor MINI F7 Flight Controller Mini F7₹4,715
T-Motor MINI Racer F7 Flight Controller: another version this guide coversT-Motor MINI Racer F7 Flight Controller₹4,745
T-Motor H7 MINI Flight Controller BMI270: another version this guide coversT-Motor H7 MINI Flight Controller BMI270₹10,555
T-Motor H7 MINI Flight Controller ICM42688: another version this guide coversT-Motor H7 MINI Flight Controller ICM42688₹10,555
T-Motor Pacer G4 Alpha HD FC Flight Controller G4 – 30.5×30.5mm: another version this guide coversT-Motor Pacer G4 Alpha HD FC Flight Controller G4 – 30.5×30.5mm₹7,129
iFlight BLITZ F7 Pro V1.1 Flight Controller 35×35: another version this guide coversiFlight BLITZ F7 Pro V1.1 Flight Controller 35×35₹9,139
iFlight BLITZ F745 Flight Controller: another version this guide coversiFlight BLITZ F745 Flight Controller₹5,869
iFlight BLITZ H7 Pro Flight Controller 35x35mm: another version this guide coversiFlight BLITZ H7 Pro Flight Controller 35x35mm₹11,829
iFlight BLITZ Mini F7 Flight Controller V1.2: another version this guide coversiFlight BLITZ Mini F7 Flight Controller V1.2₹3,549
iFlight BLITZ Mini F745 Flight Controller: another version this guide coversiFlight BLITZ Mini F745 Flight Controller₹6,129
Alternatives and when to choose them
- F4 flight controllers: cheaper.
- FC and ESC stacks: matched pairs.
- Fixed-wing flight controllers: for planes.
Common mistakes to avoid
- Flashing without saving a CLI diff first.
- Running out of UARTs because the wiring was not planned.
- Using the wrong firmware target.
- Skipping props-off motor checks after a firmware change.
Frequently asked questions
When should I choose an H7 board over an F4?
Choose H7 for ArduPilot, many peripherals or heavy filtering. For simple freestyle builds, F4 is enough.
Do H7 boards run Betaflight?
Yes. Most H7 boards support Betaflight, INAV and ArduPilot, but check the targets.
Why use an F7 board on a digital HD build?
Digital units use a UART for OSD, and F7 boards have spare UARTs for GPS and receivers too.
How do I save my settings before updating?
Type diff all in the CLI and save the text, then paste it back after flashing.
What is blackbox logging for?
It records gyro and motor data so you can tune PIDs and filters with Blackbox Explorer.
Parts for this guide
- ₹7,042View
- ₹5,660View
- ₹5,509View
- ₹10,419View
- ₹8,986View
- ₹10,654View
- ₹8,986View
- ₹9,019View
- ₹8,973View
- ₹11,649View
- ₹4,715View
- ₹4,745View
- ₹10,555View
- ₹10,555View
- ₹7,129View
- ₹9,139View
- ₹5,869View
- ₹11,829View
- ₹3,549View
- ₹6,129View
- ₹4,069View
- ₹4,651View
- ₹5,372View
- ₹4,360View
- ₹3,239View
- ₹7,909View
- ₹6,585View
- ₹8,569View
- ₹4,974View
- ₹5,650View
- ₹5,391View
- ₹12,068View
- ₹5,969View
- ₹5,998View
- ₹3,869View
- ₹4,139View
- ₹5,599View
- ₹4,130View
- ₹1,069View
- ₹1,669View
- ₹979View
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.





















