Pinout reference · Beginner · 3 min read
Capacitor Code Chart
104, 105, 473 and Other Markings
By Geekobot Learning Team · Updated 24 Oct 2026
On this page
Small capacitors carry a three-digit code in picofarads: the first two digits are the value and the third is the number of zeros. So 104 = 10 plus four zeros = 100,000 pF = 100 nF = 0.1 µF; 105 = 1 µF, 473 = 47 nF, 221 = 220 pF. A letter after the code is tolerance (J = 5%, K = 10%, M = 20%). Electrolytics print value and voltage in full.
Key specs at a glance
- Code
- Two digits + number of zeros, in pF
- Units
- 1,000 pF = 1 nF; 1,000 nF = 1 µF
- Tolerance letters
- F ±1%, G ±2%, J ±5%, K ±10%, M ±20%, Z +80/-20%
- Two-digit codes
- Value in pF directly (47 = 47 pF)
- R as decimal point
- 4R7 = 4.7 pF; 2R2 = 2.2 pF
- Electrolytics
- Printed in full, e.g. 470µF 25V, stripe marks negative
Capacitor code chart
| Code | Picofarads | Nanofarads | Microfarads |
|---|---|---|---|
| 100 | 10 pF | ||
| 220 | 22 pF | ||
| 470 | 47 pF | ||
| 101 | 100 pF | 0.1 nF | |
| 221 | 220 pF | 0.22 nF | |
| 471 | 470 pF | 0.47 nF | |
| 102 | 1,000 pF | 1 nF | 0.001 µF |
| 222 | 2,200 pF | 2.2 nF | |
| 472 | 4,700 pF | 4.7 nF | |
| 103 | 10,000 pF | 10 nF | 0.01 µF |
| 223 | 22,000 pF | 22 nF | |
| 473 | 47,000 pF | 47 nF | |
| 104 | 100,000 pF | 100 nF | 0.1 µF |
| 224 | 220,000 pF | 220 nF | 0.22 µF |
| 474 | 470,000 pF | 470 nF | 0.47 µF |
| 105 | 1,000,000 pF | 1,000 nF | 1 µF |
| 225 | 2,200,000 pF | 2,200 nF | 2.2 µF |
| 106 | 10,000,000 pF | 10 µF |
- 100
- Picofarads:
- 10 pF
- 220
- Picofarads:
- 22 pF
- 470
- Picofarads:
- 47 pF
- 101
- Picofarads:
- 100 pF
- Nanofarads:
- 0.1 nF
- 221
- Picofarads:
- 220 pF
- Nanofarads:
- 0.22 nF
- 471
- Picofarads:
- 470 pF
- Nanofarads:
- 0.47 nF
- 102
- Picofarads:
- 1,000 pF
- Nanofarads:
- 1 nF
- Microfarads:
- 0.001 µF
- 222
- Picofarads:
- 2,200 pF
- Nanofarads:
- 2.2 nF
- 472
- Picofarads:
- 4,700 pF
- Nanofarads:
- 4.7 nF
- 103
- Picofarads:
- 10,000 pF
- Nanofarads:
- 10 nF
- Microfarads:
- 0.01 µF
- 223
- Picofarads:
- 22,000 pF
- Nanofarads:
- 22 nF
- 473
- Picofarads:
- 47,000 pF
- Nanofarads:
- 47 nF
- 104
- Picofarads:
- 100,000 pF
- Nanofarads:
- 100 nF
- Microfarads:
- 0.1 µF
- 224
- Picofarads:
- 220,000 pF
- Nanofarads:
- 220 nF
- Microfarads:
- 0.22 µF
- 474
- Picofarads:
- 470,000 pF
- Nanofarads:
- 470 nF
- Microfarads:
- 0.47 µF
- 105
- Picofarads:
- 1,000,000 pF
- Nanofarads:
- 1,000 nF
- Microfarads:
- 1 µF
- 225
- Picofarads:
- 2,200,000 pF
- Nanofarads:
- 2,200 nF
- Microfarads:
- 2.2 µF
- 106
- Picofarads:
- 10,000,000 pF
- Microfarads:
- 10 µF
Tolerance and voltage letters
A letter after the three digits gives tolerance: 104K is 100 nF ±10%, 104J ±5%, 104M ±20%. Some film capacitors add a voltage code (for example 2A = 100 V, 2E = 250 V in the EIA scheme) or print the voltage directly ("63V"). Ceramic disc capacitors often carry no voltage marking; assume 50 V for small ones unless the package says otherwise.
Other marking styles
| Marking | Meaning |
|---|---|
| 47 or 47p | 47 pF (two digits = pF) |
| n47 or 470p | 470 pF |
| 4n7 | 4.7 nF |
| µ1 or .1 | 0.1 µF |
| 2A104J | 100 nF, 5%, 100 V (EIA voltage code) |
| 470µF 25V with a stripe | Electrolytic, stripe is negative |
| Tantalum: 106 / 16 V with + stripe | 10 µF, stripe is positive |
| MLCC (SMD) | Usually unmarked; measure with a meter |
- 47 or 47p
- 47 pF (two digits = pF)
- n47 or 470p
- 470 pF
- 4n7
- 4.7 nF
- µ1 or .1
- 0.1 µF
- 2A104J
- 100 nF, 5%, 100 V (EIA voltage code)
- 470µF 25V with a stripe
- Electrolytic, stripe is negative
- Tantalum: 106 / 16 V with + stripe
- 10 µF, stripe is positive
- MLCC (SMD)
- Usually unmarked; measure with a meter
Ceramic temperature codes: C0G, X7R, Y5V
Ceramic capacitors also carry a dielectric class. C0G/NP0 is stable and precise (timing, filters). X7R/X5R is general purpose but loses capacitance with DC voltage and temperature. Y5V/Z5U can lose most of its value and should only be used for decoupling where the exact value does not matter.
When in doubt, measure
A multimeter with a capacitance range, or a cheap LCR/component tester, reads the value directly. Discharge the capacitor first, and remove it from the circuit for an accurate reading. See capacitors for how to choose type and voltage rating.
Try it: Capacitor code calculator
Change the values and the diagram and results update as you type.
Common mistakes to avoid
- Reading 104 as 104 pF.
- Reading a two-digit code as a three-digit one (47 is 47 pF, not 4 x 10^7).
- Ignoring the tolerance letter when the value matters for timing.
- Fitting a capacitor with a voltage rating below the circuit voltage.
- Using a Y5V ceramic where a stable value is needed.
Frequently asked questions
What value is a 104 capacitor?
100 nF, also written 0.1 µF or 100,000 pF. It is the most common decoupling capacitor.
What value is a 105 capacitor?
1 µF (1,000,000 pF).
What does 473 mean on a capacitor?
47 followed by three zeros picofarads: 47,000 pF = 47 nF = 0.047 µF.
What does the letter K mean on a capacitor?
±10% tolerance. J is ±5% and M is ±20%.
How do I know a capacitor's voltage rating?
Electrolytics print it. Film capacitors print it or use an EIA letter code. Small ceramics often omit it; check the datasheet or packaging, and use a rating at least 1.5 times the circuit voltage.
Parts for this guide
Calculators
Terms in this guide
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.



