Component guide · Advanced · 4 min read
Holybro H-RTK F9P

Helical, Rover, Rover Lite, Ultralight, DroneCAN and UART Rovers, Base Station, RTK Antennas and Mounts
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
Holybro's H-RTK modules use the u-blox ZED-F9P multiband receiver to give centimetre accuracy with a base station or NTRIP corrections. The Helical has a high-grade helical antenna; the Rover, Rover Lite and Ultralight trade antenna size for weight; DroneCAN and UART versions suit different autopilots. The base station kit and four-band antennas complete a ground station.
Key specs at a glance
- Receiver
- u-blox ZED-F9P (L1 and L2)
- Accuracy
- About 1 cm + 1 ppm in RTK Fixed
- Update rate
- Up to 20 Hz
- Interface
- UART (GH 10-pin) or DroneCAN; USB on base
- Antenna
- Helical, patch or external 3 and 4-band
- Heading
- Two F9P units can give moving-baseline yaw
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1Holybro DroneCAN H-RTK F9P Helical GNSS Positioning System₹42,929
Option 2Holybro DroneCAN H-RTK F9P Rover GNSS Module₹43,459
Option 3Holybro DroneCAN H-RTK F9P Rover GPS 42cm₹55,509
Option 4Holybro H-RTK F9P Rover Lite GPS Module₹49,459
Option 5Holybro H-RTK F9P Ultralight RTK GNSS GPS Module₹49,189
Option 6Holybro H-RTK ZED-F9P Rover – CAN Protocol RTK GNSS Module₹51,959
What the Holybro H-RTK F9P modules and RTK antennas is
The Holybro H-RTK F9P is a u-blox ZED-F9P RTK GNSS module for drones and robots that gives centimetre position when paired with an RTK base or NTRIP corrections.
The rover on the drone needs corrections from a base. Put the base on a tripod with clear sky, survey it in, and send corrections over the telemetry radio.
With two F9P rovers mounted apart, ArduPilot can compute heading from GPS (moving baseline), which avoids compass problems near metal.
Holybro H-RTK F9P modules and RTK antennas pinout
The pins on the Holybro H-RTK F9P modules and RTK antennas and what each one does.
| Pin | Function |
|---|---|
| GH 10-pin | UART, I2C, safety switch, buzzer |
| CAN | DroneCAN versions |
| SMA | External antenna (Rover, base) |
| USB | Configuration and base output |
- GH 10-pin
- UART, I2C, safety switch, buzzer
- CAN
- DroneCAN versions
- SMA
- External antenna (Rover, base)
- USB
- Configuration and base output
Wiring the Holybro H-RTK F9P modules and RTK antennas
Connect the Holybro H-RTK F9P modules and RTK antennas like this.
| Holybro H-RTK F9P modules and RTK antennas pin | Flight controller (Pixhawk) | Flight controller (Betaflight / INAV) |
|---|---|---|
| 5V | Flight controller GPS port 5 V | Flight controller GPS port 5 V |
| GND | GND | GND |
| TX | FC UART RX | FC UART RX |
| RX | FC UART TX | FC UART TX |
| SDA / SCL | FC I2C (compass) | FC I2C (compass) |
- 5V
- Flight controller (Pixhawk):
- Flight controller GPS port 5 V
- Flight controller (Betaflight / INAV):
- Flight controller GPS port 5 V
- GND
- Flight controller (Pixhawk):
- GND
- Flight controller (Betaflight / INAV):
- GND
- TX
- Flight controller (Pixhawk):
- FC UART RX
- Flight controller (Betaflight / INAV):
- FC UART RX
- RX
- Flight controller (Pixhawk):
- FC UART TX
- Flight controller (Betaflight / INAV):
- FC UART TX
- SDA / SCL
- Flight controller (Pixhawk):
- FC I2C (compass)
- Flight controller (Betaflight / INAV):
- FC I2C (compass)
Example code
Check the ArduPilot or PX4 docs for your firmware version before setting moving baseline.
Base: H-RTK base on tripod -> USB -> Mission Planner / QGC.
Survey-in (2 m, 120 s) or fixed position. Corrections stream to the telemetry radio.
Rover: GPS1_TYPE = 1 (UART) or 9 (DroneCAN). Status: 3D fix -> RTK Float -> RTK Fixed.
Moving baseline yaw: two rovers, GPS_AUTO_CONFIG = 1, GPS1_TYPE = 17, GPS2_TYPE = 18 (UART).Setup and tuning
connect the GPS port to the autopilot and enable RTK in ArduPilot or PX4.
set up a second F9P as a base, or use NTRIP corrections over a telemetry link.
let the base survey its position for a few minutes before starting.
mount high with a clear sky view, away from the VTX and other radios.
two F9P units on one vehicle can give GPS heading without a compass.
What you need
Shop this list17 of 17 found in our store · ₹4,83,604
Holybro DroneCAN H-RTK F9P Helical GNSS Positioning System: the part this guide coversHolybro DroneCAN H-RTK F9P Helical GNSS Positioning System₹42,929
Holybro DroneCAN H-RTK F9P Rover GNSS Module: another version this guide coversHolybro DroneCAN H-RTK F9P Rover GNSS Module₹43,459
Holybro DroneCAN H-RTK F9P Rover GPS 42cm: another version this guide coversHolybro DroneCAN H-RTK F9P Rover GPS 42cm₹55,509
Holybro H-RTK F9P Rover Lite GPS Module: another version this guide coversHolybro H-RTK F9P Rover Lite GPS Module₹49,459
Holybro H-RTK F9P Ultralight RTK GNSS GPS Module: another version this guide coversHolybro H-RTK F9P Ultralight RTK GNSS GPS Module₹49,189
Holybro H-RTK ZED-F9P Rover – CAN Protocol RTK GNSS Module: another version this guide coversHolybro H-RTK ZED-F9P Rover – CAN Protocol RTK GNSS Module₹51,959
Holybro H-RTK ZED-F9P Rover – UART GNSS RTK Module: another version this guide coversHolybro H-RTK ZED-F9P Rover – UART GNSS RTK Module₹40,519
Holybro H-RTK F9P Base Station: another version this guide coversHolybro H-RTK F9P Base Station₹72,783
Holybro CH7609A RTK GNSS Antenna (4-Band): another version this guide coversHolybro CH7609A RTK GNSS Antenna (4-Band)₹7,729
Holybro High Precision RTK GNSS Antenna CSX627A (4-Band): another version this guide coversHolybro High Precision RTK GNSS Antenna CSX627A (4-Band)₹13,729
Holybro High Precision RTK GNSS Antennas (CH3602A – 3 Bands): another version this guide coversHolybro High Precision RTK GNSS Antennas (CH3602A – 3 Bands)₹2,999
Holybro H-RTK Helical Mount (Antenna Mount): another version this guide coversHolybro H-RTK Helical Mount (Antenna Mount)₹1,589
Holybro Antenna Extension Cable For H-RTK Helical (30cm): another version this guide coversHolybro Antenna Extension Cable For H-RTK Helical (30cm)₹399
Holybro Antenna Extension Cable For H-RTK Helical (40cm) – SMA Female to SMA Male: another version this guide coversHolybro Antenna Extension Cable For H-RTK Helical (40cm) – SMA Female to SMA Male₹489
Holybro Pixhawk 6C flight controller: the autopilot these modules plug intoHolybro Pixhawk 6C Flight Controller + PM02 Power Module₹36,439Closest match, check the specs
Holybro SiK telemetry radio V3 433 MHz: to send RTK corrections to the droneHolybro Sik Telemetry Radio V3 100 mW 433 MHz₹9,949Closest match, check the specs
Raspberry Pi 4 Model B (4 GB): to run an RTK base, NTRIP or loggingRaspberry Pi 4 Model B 1GB RAM₹4,476Closest match, check the specs
Alternatives and when to choose them
- CubePilot Here4: Cube ecosystem RTK.
- SparkFun ZED-F9P: breakout boards for projects.
- CUAV C-RTK: alternative RTK units.
Common mistakes to avoid
- Mounting the antenna under other electronics.
- Skipping base survey-in.
- Placing it near the VTX.
- Expecting RTK accuracy without corrections.
Frequently asked questions
What accuracy does the H-RTK F9P give?
About 1 to 2 cm horizontal with an RTK fix.
Do I need a base station?
Yes, or NTRIP corrections from a network service.
What is moving baseline?
Two F9P receivers on one vehicle that compute heading from their positions.
Why do I only get a float, not a fix?
Poor sky view, interference or weak corrections.
Can I use it on a ground robot?
Yes. It works for any vehicle running ArduPilot or PX4.
Parts for this guide
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.


