Shop by category
Shop all components
Gas, Air Quality & CO2 Sensors · DFRobot
The DFRobot Gravity MQ9 is an analog semiconductor gas sensor module designed for Arduino and other 5V microcontroller platforms. It detects Carbon Monoxide (CO) and combustible gases like Methane and Propane, providing a voltage output proportional to gas concentration for easy integration into air quality monitoring and safety systems.
📖Guide for this partMQ-9 CO and Combustible Gas Sensor→Buy 10 or more to pay ₹968.05 each
Business and institution accounts get extra tier pricing. Sign in for 100+ pieces.
Overview
The DFRobot Gravity MQ9 module utilizes a tin dioxide (SnO2) semiconductor sensing element. Its conductivity changes in the presence of target gases. The module employs a dual-heating cycle: a low-temperature phase (1.5V heater) optimizes sensitivity to Carbon Monoxide, while a high-temperature phase (5.0V heater) detects combustible gases like Methane and Propane and cleans the sensor of residues. This design enhances selectivity and sensor longevity.
The module outputs an analog voltage signal that varies linearly with gas concentration, which can be read directly by any microcontroller with an ADC input, such as Arduino, ESP32, or Raspberry Pi (with an ADC board). The onboard potentiometer allows for calibration and sensitivity tuning to suit specific environmental conditions and detection thresholds.
| Brand / part no. | DFRobot |
|---|---|
| Category | Gas, Air Quality & CO2 Sensors |
| Interface | Analog Output (0-5V) |
| Sensor Type | Semiconductor (SnO2) |
| Detection Gases | Carbon Monoxide (CO), Methane, Propane, Combustible Gases |
| Heater Resistance | 31Ω ±3Ω |
| Heater Consumption | ≤350 mW |
| Operating Humidity | 65% ±5% RH |
| Power Supply Voltage | 5V DC |
| Combustible Gas Range | 100 - 10000 ppm |
| Operating Temperature | 20°C ±2°C |
| CO Concentration Range | 10 - 1000 ppm |
| Heater Voltage (Low Temp) | 1.5V |
| Module Dimensions (L x W) | 36.4 mm x 26.6 mm |
| Heater Voltage (High Temp) | 5.0V |
| Sensing Resistance (in 100ppm CO) | 2 kΩ - 20 kΩ |
| Sensitivity (Rs(air)/Rs(100ppm CO)) | ≥5 |
Typical values from the manufacturer's datasheet. Confirm the exact variant before you build a product around it.
Step-by-step builds that use parts from Gas, Air Quality & CO2 Sensors.
Category: Gas, Air Quality & CO2 Sensors; Interface: Analog Output (0-5V); Sensor Type: Semiconductor (SnO2); Detection Gases: Carbon Monoxide (CO), Methane, Propane, Combustible Gases; Heater Resistance: 31Ω ±3Ω; Heater Consumption: ≤350 mW. The full list is under Specifications.
Yes. Prices include GST and every order comes with a GST invoice. Add your GSTIN at checkout and we put it on the invoice for input credit.
Delivery is a flat ₹80 anywhere in India, and free on orders over ₹999. We ship from our Bengaluru and Guwahati warehouses, whichever is nearer to you, and the product page shows an estimated delivery date for your PIN code.
Yes, on eligible PIN codes for orders up to ₹5,000. A ₹150 COD charge is added at checkout, and checkout shows whether COD is available for your order. You can also pay by UPI, card or net banking.
Yes, if it arrives damaged, defective or is not what you ordered: tell us within 7 days of delivery and we collect it free and send a replacement or a full refund. We do not take back parts that are not faulty, so check the specs or ask us before you order. You can cancel for free until the order is dispatched.
Yes. The price per unit drops automatically at higher quantities, as shown in the price tiers above. For 100+ pieces or a purchase order, ask for a bulk quote.
Check the specifications for voltage and interface, or ask Geeko AI. It can suggest compatible boards and wiring.
Guides for this part and its category.

₹1,499.00
Incl. GST
₹779.00
Incl. GST
₹3,029.00
Incl. GST
₹2,804.00
Incl. GSTNo reviews yet. Bought or built with this? Be the first to review it.