Shop by category
Shop all components
Temperature & Thermal Sensors · DFRobot
The DFRobot Gravity DHT22 is a high-precision digital temperature and humidity sensor module compatible with 5V Arduino, Raspberry Pi, ESP32, and other microcontroller platforms via its single-wire digital interface.
📖Guide for this partDHT11 vs DHT22→Buy 10 or more to pay ₹996.55 each
Business and institution accounts get extra tier pricing. Sign in for 100+ pieces.
Overview
The DFRobot Gravity DHT22 sensor integrates a capacitive humidity sensing element and a precision band-gap temperature sensor, both connected to a dedicated 8-bit microcontroller for digital signal processing and output. This design ensures high reliability and excellent long-term stability by providing calibrated digital signals directly to the host controller.
The module uses a single-wire digital communication protocol, which allows it to be connected to a single digital or analog (configured as digital) pin on platforms like Arduino, ESP32, or Raspberry Pi. Its small form factor, low power consumption, and signal transmission capability up to 20 meters make it suitable for a wide range of environmental monitoring projects.
Good for
Category
Temperature & Thermal SensorsSKU
GB-SENS-3098
| Brand / part no. | DFRobot |
|---|---|
| Model | DHT22 |
| Category | Temperature & Thermal Sensors |
| Interface | Digital |
| Package size | 3.8 × 2 cm |
| Supply voltage | 5 V |
| Shipping weight | 20 g |
Typical values from the manufacturer's datasheet. Confirm the exact variant before you build a product around it.
| VCC | Power, 3.3–6 V |
|---|---|
| DATA | Digital data. Needs a 10 kΩ pull-up (often on the module) |
| GND | Ground |
Typical pin names. Boards from different makers can differ, so check the print on your module.
Library: Adafruit DHT sensor library
#include <DHT.h>
DHT dht(4, DHT22); // DATA on GPIO 4
void setup() { Serial.begin(115200); dht.begin(); }
void loop() {
float t = dht.readTemperature(), h = dht.readHumidity();
if (!isnan(t)) Serial.printf("%.1f °C %.1f %%RH\n", t, h);
delay(2000);
}Step-by-step builds that use parts from Temperature & Thermal Sensors.
Model: DHT22; Category: Temperature & Thermal Sensors; Interface: Digital; Package size: 3.8 × 2 cm; Supply voltage: 5 V; Shipping weight: 20 g. The full list is under Specifications.
VCC: Power, 3.3–6 V; DATA: Digital data. Needs a 10 kΩ pull-up (often on the module); GND: Ground. These are the typical pin names shown under Pinout & wiring. Boards from different makers can differ, so check the print on your module.
Adafruit DHT sensor library. You can copy the example code from this page.
Yes. Prices include GST and every order comes with a GST invoice. Add your GSTIN at checkout and we put it on the invoice for input credit.
Delivery is a flat ₹80 anywhere in India, and free on orders over ₹999. We ship from our Bengaluru and Guwahati warehouses, whichever is nearer to you, and the product page shows an estimated delivery date for your PIN code.
Yes, on eligible PIN codes for orders up to ₹5,000. A ₹150 COD charge is added at checkout, and checkout shows whether COD is available for your order. You can also pay by UPI, card or net banking.
Yes, if it arrives damaged, defective or is not what you ordered: tell us within 7 days of delivery and we collect it free and send a replacement or a full refund. We do not take back parts that are not faulty, so check the specs or ask us before you order. You can cancel for free until the order is dispatched.
Yes. The price per unit drops automatically at higher quantities, as shown in the price tiers above. For 100+ pieces or a purchase order, ask for a bulk quote.
Check the specifications for voltage and interface, or ask Geeko AI. It can suggest compatible boards and wiring.
Guides for this part and its category.

₹4,476.00
Incl. GST
₹15,920.00
Incl. GST
₹5,222.00
Incl. GST
₹664.00
Incl. GSTNo reviews yet. Bought or built with this? Be the first to review it.