Shop by category
Shop all components
Tilt, Inclinometer & Vibration Sensors · XKB Connection
The XKB Connection SW-105AC-10G is a single-direction, ball-type tilt switch sensor designed for vibration and tilt detection in electronic projects. It operates on low-voltage DC circuits (under 12V) and provides a simple on/off output signal, making it compatible with microcontrollers like Arduino, Raspberry Pi, and ESP32 for position sensing applications.
📖Guide for this partVibration and Tilt Switch Components→Buy 10 or more to pay ₹8.55 each
Business and institution accounts get extra tier pricing. Sign in for 100+ pieces.
Overview
The SW-105AC-10G is a mechanical ball-type tilt sensor that functions as a single-pole, single-throw (SPST) switch. Its internal mechanism uses a conductive ball that rolls to bridge contacts when the sensor is tilted beyond its 10° activation angle in the designated direction, closing the circuit. When level or tilted in the opposite direction, the circuit remains open.
Constructed with a sealed housing, this sensor is protected against water and dust ingress, enhancing its suitability for applications exposed to environmental elements. The device is built from stable, environmentally compliant metal materials, ensuring long-term reliability and a high cycle life for repeated use in monitoring and control systems.
Good for
Category
Tilt, Inclinometer & Vibration SensorsSKU
GB-SENS-4343
| Brand / part no. | XKB Connection |
|---|---|
| Category | Tilt, Inclinometer & Vibration Sensors |
| Item Type | Tilt/Vibration Sensor Switch |
| Materials | Environmentally Friendly Metal |
| Compliance | ROHS |
| Conduction Time | 2 ms |
| Operating Current | < 20 mA |
| Operating Voltage | < 12 VDC |
| Housing Protection | Sealed, Waterproof, Dustproof |
| Mechanical Lifespan | 100,000 cycles |
| Activation Tilt Angle | > 10° |
| Manufacturer Part Number | SW-105AC-10G |
| Closed-Circuit Resistance | ~1 ohm |
Typical values from the manufacturer's datasheet. Confirm the exact variant before you build a product around it.
| VCC | Power |
|---|---|
| GND | Ground |
| DO | Digital out on vibration |
Typical pin names. Boards from different makers can differ, so check the print on your module.
Step-by-step builds that use parts from Tilt, Inclinometer & Vibration Sensors.
Category: Tilt, Inclinometer & Vibration Sensors; Item Type: Tilt/Vibration Sensor Switch; Materials: Environmentally Friendly Metal; Compliance: ROHS; Conduction Time: 2 ms; Operating Current: < 20 mA. The full list is under Specifications.
VCC: Power; GND: Ground; DO: Digital out on vibration. These are the typical pin names shown under Pinout & wiring. Boards from different makers can differ, so check the print on your module.
Yes. Prices include GST and every order comes with a GST invoice. Add your GSTIN at checkout and we put it on the invoice for input credit.
Delivery is a flat ₹80 anywhere in India, and free on orders over ₹999. We ship from our Bengaluru and Guwahati warehouses, whichever is nearer to you, and the product page shows an estimated delivery date for your PIN code.
Yes, on eligible PIN codes for orders up to ₹5,000. A ₹150 COD charge is added at checkout, and checkout shows whether COD is available for your order. You can also pay by UPI, card or net banking.
Yes, if it arrives damaged, defective or is not what you ordered: tell us within 7 days of delivery and we collect it free and send a replacement or a full refund. We do not take back parts that are not faulty, so check the specs or ask us before you order. You can cancel for free until the order is dispatched.
Yes. The price per unit drops automatically at higher quantities, as shown in the price tiers above. For 100+ pieces or a purchase order, ask for a bulk quote.
Check the specifications for voltage and interface, or ask Geeko AI. It can suggest compatible boards and wiring.
Guides for this part and its category.

₹51.00
Incl. GST
₹170.00
Incl. GST
₹24.00
Incl. GST
₹589.00
Incl. GSTNo reviews yet. Bought or built with this? Be the first to review it.