Shop by category
Shop all components
Tilt, Inclinometer & Vibration Sensors · XKB Connection
The XKB Connection SW-200DW-17T3G is a single-ball, dual-pass tilt sensing switch designed for vibration and orientation detection. It provides a simple on/off digital output signal, compatible with 3.3V and 5V logic systems like Arduino, Raspberry Pi, and industrial PLCs for basic state monitoring.
📖Guide for this partVibration and Tilt Switch Components→Buy 10 or more to pay ₹18.05 each
Business and institution accounts get extra tier pricing. Sign in for 100+ pieces.
Overview
The SW-200DW-17T3G operates on a simple mechanical principle: a conductive ball makes or breaks contact between internal terminals based on orientation. When the guide end (non-pin end) is tilted more than 10 degrees from horizontal, the switch opens (OFF state). Conversely, when the trigger end (gold-plated pin end) is tilted down beyond 10 degrees, the switch closes (ON state), completing the circuit. This makes it sensitive to both tilt and vibration when in a horizontal position.
Constructed from environmentally friendly metal materials, the sensor is sealed to IP standards for protection against water and dust ingress. Its robust design and wide operating temperature range make it suitable for integration into control systems, safety cut-offs, and position-sensing applications where a basic digital trigger is required.
Good for
Category
Tilt, Inclinometer & Vibration SensorsSKU
GB-SENS-4338
| Brand / part no. | XKB Connection |
|---|---|
| Category | Tilt, Inclinometer & Vibration Sensors |
| Compliance | ROHS |
| Max Current | 20 mA |
| Sensor Type | Mechanical Tilt / Vibration Switch |
| Pin Material | Gold-Plated |
| Output Signal | Digital (Open/Closed Circuit) |
| Actuation Angle | > 10° |
| Mechanical Life | 100,000 Cycles |
| Housing Material | Metal |
| Operating Voltage | < 12 VDC |
| Operating Temperature | Up to 120°C |
| Environmental Protection | Waterproof, Dustproof |
| Manufacturer Part Number | SW-200DW-17T3G |
Typical values from the manufacturer's datasheet. Confirm the exact variant before you build a product around it.
| VCC | Power |
|---|---|
| GND | Ground |
| DO | Digital out on vibration |
Typical pin names. Boards from different makers can differ, so check the print on your module.
Step-by-step builds that use parts from Tilt, Inclinometer & Vibration Sensors.
Category: Tilt, Inclinometer & Vibration Sensors; Compliance: ROHS; Max Current: 20 mA; Sensor Type: Mechanical Tilt / Vibration Switch; Pin Material: Gold-Plated; Output Signal: Digital (Open/Closed Circuit). The full list is under Specifications.
VCC: Power; GND: Ground; DO: Digital out on vibration. These are the typical pin names shown under Pinout & wiring. Boards from different makers can differ, so check the print on your module.
Yes. Prices include GST and every order comes with a GST invoice. Add your GSTIN at checkout and we put it on the invoice for input credit.
Delivery is a flat ₹80 anywhere in India, and free on orders over ₹999. We ship from our Bengaluru and Guwahati warehouses, whichever is nearer to you, and the product page shows an estimated delivery date for your PIN code.
Yes, on eligible PIN codes for orders up to ₹5,000. A ₹150 COD charge is added at checkout, and checkout shows whether COD is available for your order. You can also pay by UPI, card or net banking.
Yes, if it arrives damaged, defective or is not what you ordered: tell us within 7 days of delivery and we collect it free and send a replacement or a full refund. We do not take back parts that are not faulty, so check the specs or ask us before you order. You can cancel for free until the order is dispatched.
Yes. The price per unit drops automatically at higher quantities, as shown in the price tiers above. For 100+ pieces or a purchase order, ask for a bulk quote.
Check the specifications for voltage and interface, or ask Geeko AI. It can suggest compatible boards and wiring.
Guides for this part and its category.

₹51.00
Incl. GST
₹170.00
Incl. GST
₹24.00
Incl. GST
₹589.00
Incl. GSTNo reviews yet. Bought or built with this? Be the first to review it.