Shop by category
Shop all components
Tilt, Inclinometer & Vibration Sensors · XKB Connection
The XKB Connection SW-58015PD-10B3 is a sealed, non-directional vibration induction switch designed for low-voltage (<12V DC) control systems. It provides a simple ON/OFF output signal upon detecting vibration or centrifugal force, making it suitable for basic motion detection, anti-tamper alarms, and device state monitoring.
📖Guide for this partVibration and Tilt Switch Components→Buy 10 or more to pay ₹8.55 each
Business and institution accounts get extra tier pricing. Sign in for 100+ pieces.
Overview
The SW-58015PD-10B3 vibration sensor operates as a normally-open switch that closes its circuit when subjected to sufficient vibration or centrifugal force. This electromechanical sensing principle provides a robust and straightforward digital signal for event detection without complex signal conditioning.
Its sealed construction protects internal components, making it suitable for environments where dust or minor moisture may be present. The sensor’s non-directional design simplifies installation, as it responds to vibration from any axis, ideal for general-purpose shock and motion detection in consumer electronics, automotive systems, or industrial equipment monitoring.
Good for
Category
Tilt, Inclinometer & Vibration SensorsSKU
GB-SENS-4334
| Brand / part no. | XKB Connection |
|---|---|
| Housing | Sealed |
| Category | Tilt, Inclinometer & Vibration Sensors |
| Item Type | Vibration Sensor / Switch |
| Compliance | ROHS |
| Output Type | Switch (Normally Open) |
| Actuation Type | Vibration / Centrifugal Force |
| Directionality | Non-Directional |
| Operating Life | 200,000 cycles |
| Conduction Time | 2 ms |
| Operating Current | <20 mA |
| Operating Voltage | <12 VDC |
| Manufacturer Part Number | SW-58015PD-10B3 |
| Closed Circuit Resistance | <30 mΩ |
Typical values from the manufacturer's datasheet. Confirm the exact variant before you build a product around it.
| VCC | Power |
|---|---|
| GND | Ground |
| DO | Digital out on vibration |
Typical pin names. Boards from different makers can differ, so check the print on your module.
Step-by-step builds that use parts from Tilt, Inclinometer & Vibration Sensors.
Housing: Sealed; Category: Tilt, Inclinometer & Vibration Sensors; Item Type: Vibration Sensor / Switch; Compliance: ROHS; Output Type: Switch (Normally Open); Actuation Type: Vibration / Centrifugal Force. The full list is under Specifications.
VCC: Power; GND: Ground; DO: Digital out on vibration. These are the typical pin names shown under Pinout & wiring. Boards from different makers can differ, so check the print on your module.
Yes. Prices include GST and every order comes with a GST invoice. Add your GSTIN at checkout and we put it on the invoice for input credit.
Delivery is a flat ₹80 anywhere in India, and free on orders over ₹999. We ship from our Bengaluru and Guwahati warehouses, whichever is nearer to you, and the product page shows an estimated delivery date for your PIN code.
Yes, on eligible PIN codes for orders up to ₹5,000. A ₹150 COD charge is added at checkout, and checkout shows whether COD is available for your order. You can also pay by UPI, card or net banking.
Yes, if it arrives damaged, defective or is not what you ordered: tell us within 7 days of delivery and we collect it free and send a replacement or a full refund. We do not take back parts that are not faulty, so check the specs or ask us before you order. You can cancel for free until the order is dispatched.
Yes. The price per unit drops automatically at higher quantities, as shown in the price tiers above. For 100+ pieces or a purchase order, ask for a bulk quote.
Check the specifications for voltage and interface, or ask Geeko AI. It can suggest compatible boards and wiring.
Guides for this part and its category.

₹51.00
Incl. GST
₹170.00
Incl. GST
₹24.00
Incl. GST
₹589.00
Incl. GSTNo reviews yet. Bought or built with this? Be the first to review it.