Same-day dispatch before 2 PM · Free delivery over ₹999 · GST invoices Get the appPrices incl. GST
Geekobot
Snap & SendNEWGeeko AIWhere's myOrder
Log in
Products
  • Projects
    • Component guidesHow parts work, with code you can run
    • Learning pathsFrom your first LED to your first robot
    • Workshops & eventsOnline sessions for makers and classes
    • ElectrolarkFree guided builds, simulator and certificates
    • Students & teachersStudent discount and classroom help
    • CommunityShare builds and ask other makers
    • CalculatorsOhm's law, LED resistor, 555 and 100+ more
    • Circuit builderWire parts and run the circuit, powered by Electrolark
    • Geeko AIAsk what to buy or how to wire it
    • Snap & SendPhotograph a part or list, we find it
    • Part finderAnswer a few questions, get the right part
    • Compatibility checkWill these two parts work together?
    • Compare partsSpecs side by side
    • Business & bulk ordersGST invoices, credit and volume prices
    • Request a quotationSend your list, get a quote
    • Classroom kitsPer-student kits and lab bundles
    • Gift cardsFor students, teams and events
  • Atal Tinkering Lab
BOM to cart
Geekobot

Components, kits and know-how for makers, students, engineers, labs and businesses across India.

Ask Geeko AIOrders, parts and projects, any timeEmail supportReply within 1 working dayGet the Geekobot appAdd it to your home screen, free

Follow us

Shop

  • Boards & SBCs
  • Sensors & Modules
  • IoT & Wireless
  • Drone & FPV
  • 3D Printing
  • Filaments & Resins
  • Motors & Drivers
  • Power & Batteries
  • Semiconductors
  • Passive
  • Displays & LEDs
  • Switches & Relays
  • Wires & Cables
  • Prototyping
  • Tools & Test
  • Robotics
  • STEM Kits
  • Atal Tinkering Lab
  • Mechanical Parts
  • Audio

Orders

  • Track your order
  • Help & support
  • Shipping and delivery
  • Refunds and cancellation
  • Contact us

Learn

  • Projects
  • Geeko AI project assistant
  • Learning paths
  • Guides
  • Calculators
  • Electrolark: free guided builds

Part tools

  • Part finder
  • Compare parts
  • Will it work with my board?

Institutions

  • Classroom kits
  • Atal Tinkering Lab
  • Students & teachers
  • Workshops & Events

Business

  • Business & education
  • Request a quotation
  • BOM bulk upload
  • Quick order by SKU

Company

  • About Geekobot
  • Community
  • Gift cards
  • Terms & conditions
  • Privacy policy
  • Product directory
  • Sitemap

© 2026 Geekobot, a trade name of OLatus Systems Private Limited. All rights reserved.

20, 1st Floor, Neeladri Complex, 10th Cross, Sampige Rd, 2nd Main, Malleshwaram, Bengaluru, Karnataka 560003 · GSTIN 29AACCO0462F1ZM

+91 91810 15607 · connect@geekobot.in · Monday to Saturday, 10 AM to 2 PM IST

UPI · CARDS · NETBANKING · GST INVOICES

ShopProjectsGeeko AIGuides
Compare 0 parts →
Log in

Shop by category

Shop all components
  • Boards & SBCs1,910 products
    • Alternative Single Board Computers
    • Arduino Ecosystem
    • FPGA & Logic Boards
    • Microcontroller & Wireless Boards
    View all
  • Sensors & Modules4,701 products
    • Biomedical & Heart Rate
    • Current, Voltage & Power
    • Force, Weight & Pressure
    • Gas, Weather & Environmental
    View all
  • IoT & Wireless2,314 products
    • RF Modules
    • RFID & NFC
    • Antennas & RF Accessories
    • Cameras & Smart Vision
    View all
  • Drone & FPV3,558 products
    • Flight Control & Navigation
    • FPV Video & Optics
    • Frames & Structural Parts
    • Motors & Propulsion
    View all
  • 3D Printing2,204 products
    • 3D Printers
    • 3D Scanners & Digitizers
    • Laser Engravers & Cutters
    • Material Management & Upgrades
    View all
  • Filaments & Resins1,472 products
    • Filaments
    • Photopolymer Resins
    View all
  • Motors & Drivers463 products
    • BLDC Motor Drivers
    • DC & Geared Motors
    • DC Motor Drivers
    • Linear Actuators & Solenoids
    View all
  • Power & Batteries557 products
    • Battery Holders & Connectors
    • Breadboard Power
    • Chargers & BMS
    • DC-DC Converters
    View all
  • Semiconductors295 products
    • Diodes & Rectifiers
    • Interface & RF Encoder ICs
    • Logic ICs (74xx)
    • Logic ICs (CD4000)
    View all
  • Passive67 products
    • Capacitors
    • Circuit Protection
    • Crystals & Oscillators
    • Inductors
    View all
  • Displays & LEDs572 products
    • 7-Segment & Dot Matrix
    • Addressable LEDs
    • Character LCDs
    • Graphic LCDs
    View all
  • Switches & Relays184 products
    • Keypads & Touch
    • Push Buttons & Tactile
    • Relay Modules
    • Relays
    View all
  • Wires & Cables233 products
    • Board-to-Wire Connectors
    • Crimp & Splice
    • Headers & Dupont
    • Heat Shrink & Sleeving
    View all
  • Prototyping101 products
    • Breadboards
    • Interface Modules
    • PCBs & Perfboards
    View all
  • Tools & Test717 products
    • Bench Power Supplies
    • Hand Tools
    • Measuring Tools
    • Meters & Testers
    View all
  • Robotics180 products
    • Humanoid & Legged Robots
    • Robot Chassis & Platforms
    • Robotic Arms & Grippers
    • Wheels & Casters
    View all
  • STEM Kits268 products
    • Arduino Learning Kits
    • Coding & IoT Kits
    • Early Coding (Ages 3-8)
    • Invention Kits
    View all
  • Atal Tinkering Lab196 products
    • Package 1: Electronics, Robotics, IoT and Sensors
    • Package 2: Rapid Prototyping Tools
    • Package 3: Mechanical, Electrical and Measurement Tools
    • Package 4: Power Supply, Accessories and Safety Equipment
    View all
  • Mechanical Parts212 products
    • Bearings
    • Brackets & Mounts
    • Couplers
    • Fasteners & Standoffs
    View all
  • Audio109 products
    • Amplifier Modules
    • Buzzers & Sirens
    • Speakers
    View all
  1. Home
  2. ›Projects
  3. ›Lean meter

Display & LED projects

Motorbike and cycle lean-angle meter

See how far you lean into corners and how steep the road is.

By Geekobot Learning Team

Beginner
Difficulty
1 hour
Build time
₹588
Parts cost
5
Parts
Arduino
Platform
Add all parts · ₹588Start building
  • Travel & tracking
  • Games & fun
  • Measurement & tools
NANO
Tap a part to see what it does
OverviewPartsWiringBuildCodeTroubleshootFAQIdeas

What you'll build

The MPU6050 measures roll (lean) and pitch (slope) and the OLED shows both live. Mounted on the handlebar or frame, it shows the lean in each corner and the gradient of a climb.

What you'll learn

  • Accelerometers, gyros and tilt angles
  • Drawing text on an I²C display
Safety

Do not read the display while riding. Check it when stopped, or log the data instead.

  1. SenseGY-521 MPU6050
  2. ThinkArduino Nano runs the sketch
  3. Act0.96" OLED

Parts list

Tick anything you already have and the total updates.

PartQtyPrice
  • NANO
    Nano CH340 Development Board (Soldered)
    GB-SBCD-0339Guide

    The brain of the project

    Works with the same pins and code as the original Arduino Nano.

    × 1₹185₹185
  • GY-521 MPU6050 6-Axis Gyro and Accelerometer Module
    GB-PROT-0016

    Six-axis motion sensor: a three-axis accelerometer that feels gravity and bumps, and a three-axis gyro that measures how fast it turns.

    × 1₹169₹169
  • 0.96" OLED Display 128x64 (I2C)
    GB-DISP-0005Guide

    Crisp 128×64 monochrome screen over I²C.

    × 1₹167₹167
  • Solderless Breadboard (830 points)
    GB-PROT-0001Guide

    Holds everything together without soldering

    × 1₹18₹18
  • Dupont Jumper Wires (40 pcs)
    GB-WIRE-0001Guide

    Connects the parts

    × 1₹49₹49

Complete kit

5 of 5 parts in one tap

₹588

GST included

3% off these parts while the whole kit stays in your cart

Parts you still need

₹588

5 of 5 parts. Tick anything you already have.

About ₹17,640 before bulk pricing for 30 kits.

Request bulk quote

Tools you'll need

  • Digital Multimeter
  • Wire Stripper and Cutter

Learn the parts

  • ESP32 vs Arduino Uno
  • MAX30102 Heart Rate and SpO2 Sensor Guide
  • Arduino Uno

Calculators for this build

  • I²C pull-up resistor calculator
  • UART, I²C and SPI transfer time calculator
  • Display memory and refresh rate calculator

Wiring

Follow the colours: red is power, dark grey is ground, blue is a signal.

PartPinConnect toNote
GY-521 MPU6050VCC5V
GY-521 MPU6050GNDGND
GY-521 MPU6050SCLA5
GY-521 MPU6050SDAA4
0.96" OLEDVCC5V
0.96" OLEDGNDGND
0.96" OLEDSCLA5
0.96" OLEDSDAA4
  • GY-521 MPU6050VCC → 5V
  • GY-521 MPU6050GND → GND
  • GY-521 MPU6050SCL → A5
  • GY-521 MPU6050SDA → A4
  • 0.96" OLEDVCC → 5V
  • 0.96" OLEDGND → GND
  • 0.96" OLEDSCL → A5
  • 0.96" OLEDSDA → A4
Built it? Check your wiring before you power up.Pick the pin each wire went to and we'll point out swapped pins, power mistakes and pins that clash.

Step-by-step build

0 of 8 done

Code

bike_lean_angle_meter.inoVerify & upload in Electrolark
// Motorbike and cycle lean-angle meter
// Geekobot project library · board: Arduino Nano
// Wiring diagram, parts list and build steps: Geekobot project page "bike-lean-angle-meter"

#include <Wire.h>
#include <Adafruit_MPU6050.h>
#include <Adafruit_Sensor.h>
#include <Adafruit_GFX.h>
#include <Adafruit_SSD1306.h>

Adafruit_MPU6050 mpu;
sensors_event_t accEvt, gyrEvt, tmpEvt;
Adafruit_SSD1306 oled(128, 64, &Wire, -1);

// ---- latest readings ----
float pitchDeg = 0;
float rollDeg = 0;
float shakeG = 0;

const unsigned long READ_EVERY_MS = 100;
unsigned long lastRead = 0;
const char* statusText = "OK";

void readImu() { mpu.getEvent(&accEvt, &gyrEvt, &tmpEvt); }

float pitchDegNow() { return atan2(accEvt.acceleration.x, sqrt(accEvt.acceleration.y * accEvt.acceleration.y + accEvt.acceleration.z * accEvt.acceleration.z)) * 57.3f; }

float rollDegNow() { return atan2(accEvt.acceleration.y, accEvt.acceleration.z) * 57.3f; }

float shakeGNow() { float a = sqrt(accEvt.acceleration.x * accEvt.acceleration.x + accEvt.acceleration.y * accEvt.acceleration.y + accEvt.acceleration.z * accEvt.acceleration.z) / 9.81f; return fabs(a - 1.0f); }

float gyroZNow() { return gyrEvt.gyro.z * 57.3f; }   // turning speed in degrees per second

void updateDisplay() {
  oled.clearDisplay();
  oled.setTextSize(1);
  oled.setCursor(0, 0);
  oled.print(F("Lean angle"));
  oled.drawLine(0, 10, 127, 10, SSD1306_WHITE);
  oled.setCursor(0, 14);
  oled.print(F("Pitch: "));
  oled.print(pitchDeg, 1);
  oled.print(F(" deg"));
  oled.setCursor(0, 24);
  oled.print(F("Roll: "));
  oled.print(rollDeg, 1);
  oled.print(F(" deg"));
  oled.display();
}

void setup() {
  Serial.begin(115200);
  if (!mpu.begin()) Serial.println(F("MPU6050 not found"));
  mpu.setAccelerometerRange(MPU6050_RANGE_4_G);
  mpu.setGyroRange(MPU6050_RANGE_500_DEG);
  mpu.setFilterBandwidth(MPU6050_BAND_21_HZ);
  if (!oled.begin(SSD1306_SWITCHCAPVCC, 0x3C)) Serial.println(F("OLED not found"));
  oled.setTextColor(SSD1306_WHITE);
  oled.clearDisplay();
  oled.display();
}

void loop() {
  if (millis() - lastRead < READ_EVERY_MS) return;
  lastRead = millis();
  pitchDeg = (readImu(), pitchDegNow());
  rollDeg = rollDegNow();
  shakeG = shakeGNow();
  Serial.print(F("Pitch="));
  Serial.print(pitchDeg, 1);
  Serial.print(F("deg"));
  Serial.print(F(", Roll="));
  Serial.print(rollDeg, 1);
  Serial.print(F("deg"));
  Serial.println();
  updateDisplay();
}

Run it: what this code does

The sketch above runs here on a simulated Arduino Nano. Move the sliders for the sensors and buttons it reads, and watch the Serial monitor, display and outputs change.

Troubleshooting

"MPU6050 not found"+

Check SDA and SCL are not swapped. An I²C scanner should show 0x68 (0x69 if AD0 is tied high).

Angles drift or jump+

Keep I²C wires short, add a 100 nF capacitor across VCC and GND, and mount the board away from motor wires.

Screen stays blank+

Check SDA/SCL and try address 0x3D. Run an I²C scanner to confirm.

Nothing happens after uploading+

Open the Serial Monitor at 115200 baud and check for messages. Make sure you chose the right board and port in the Arduino IDE.

Upload fails+

Close other programs using the serial port, try another USB cable (some are charge-only) and press reset just before uploading.

FAQ

Can I use an ESP32 instead of the Arduino?+

Yes. Most of the code works unchanged on an ESP32 with the ESP32 board package. Watch for 5 V modules: ESP32 pins are 3.3 V, so 5 V output signals need a resistor divider.

How do I power it without a computer?+

Use a 5 V USB phone charger or a power bank into the board's USB port.

What parts do I need to build the motorbike and cycle lean-angle meter?+

5 parts: Nano CH340 Development Board (Soldered), GY-521 MPU6050 6-Axis Gyro and Accelerometer Module, 0.96" OLED Display 128x64 (I2C), Solderless Breadboard (830 points) and Dupont Jumper Wires (40 pcs). Tools: Digital Multimeter and Wire Stripper and Cutter. On this page you can tick the parts you already have and add only the rest to your cart.

How hard is it and how long does it take?+

It is a beginner project and takes about 1 hour. The build on this page has 8 steps.

Do I need to write the code myself?+

No. This page has the complete, tested code (bike_lean_angle_meter.ino). Install these libraries first: Adafruit MPU6050, Adafruit Unified Sensor, Adafruit SSD1306 and Adafruit GFX Library.

Can I see what the code does before I build it?+

Yes. The Run it panel under the code runs this exact sketch on a simulated board. Move the sliders or press the buttons for the sensors it reads, and the Serial monitor, display and outputs react as they will on the real build. It is a simulation, so real readings depend on your parts and wiring.

How much does the motorbike and cycle lean-angle meter cost to build?+

About ₹588 for the parts at the prices on this page, plus tools if you do not have them. Quantity price breaks lower the cost when you build several.

What will I learn from this project?+

Accelerometers, gyros and tilt angles; Drawing text on an I²C display.

Is it safe to build?+

Do not read the display while riding. Check it when stopped, or log the data instead.

What can I build next with these parts?+

Ideas that reuse this build: Bike speedometer and Digital spirit level. They are listed under Take it further on this page.

Take it further

  • Bike speedometer
  • Digital spirit level

Related projects

  • NANO
    Display & LED
    Beginner· 1 hour

    Remote-controlled RGB mood light

    Warm, cool, rainbow or breathing: cycle lighting moods from your sofa.

    ₹375 · 6 partsArduino
  • UNO
    Display & LED
    Beginner· 1 hour

    Electronic dice on an LED matrix

    Press to roll: the pips tumble and slow down before landing on a number.

    ₹413 · 6 partsArduino
  • NANO12:30
    Display & LED
    Beginner· 1 hour

    Reaction timer game

    Wait for the light, hit the button: how many milliseconds can you beat?

    ₹362 · 7 partsArduino
  • NANO12:30
    Display & LED
    Beginner· 1 hour

    Digital clock with real-time clock

    A bright 4-digit clock that keeps time through power cuts.

    ₹432 · 5 partsArduino

Learning project. Check every circuit and the datasheet of each part before you power it up.

Run itChange the inputs and watch the output
Lean angle
Pitch: 0.0 deg
Roll: 0.0 deg
Serial monitor115200 baud
deg, Roll=0.0deg
Pitch=0.0deg, Roll=0.0deg
Pitch=0.0deg, Roll=0.0deg
Pitch=0.0deg, Roll=0.0deg
Pitch=0.0deg, Roll=0.0deg
Pitch=0.0deg, Roll=0.0deg

A simulation of the sketch above, so you know what to expect. Real readings vary with your parts and wiring.

Ask the Community

Ask a question Share your build