Same-day dispatch before 2 PM · Free delivery over ₹999 · GST invoices Get the appPrices incl. GST
Geekobot
Snap & SendNEWGeeko AIWhere's myOrder
Log in
Products
  • Projects
    • Component guidesHow parts work, with code you can run
    • Learning pathsFrom your first LED to your first robot
    • Workshops & eventsOnline sessions for makers and classes
    • ElectrolarkFree guided builds, simulator and certificates
    • Students & teachersStudent discount and classroom help
    • CommunityShare builds and ask other makers
    • CalculatorsOhm's law, LED resistor, 555 and 100+ more
    • Circuit builderWire parts and run the circuit, powered by Electrolark
    • Geeko AIAsk what to buy or how to wire it
    • Snap & SendPhotograph a part or list, we find it
    • Part finderAnswer a few questions, get the right part
    • Compatibility checkWill these two parts work together?
    • Compare partsSpecs side by side
    • Business & bulk ordersGST invoices, credit and volume prices
    • Request a quotationSend your list, get a quote
    • Classroom kitsPer-student kits and lab bundles
    • Gift cardsFor students, teams and events
  • Atal Tinkering Lab
BOM to cart
Geekobot

Components, kits and know-how for makers, students, engineers, labs and businesses across India.

Ask Geeko AIOrders, parts and projects, any timeEmail supportReply within 1 working dayGet the Geekobot appAdd it to your home screen, free

Follow us

Shop

  • Boards & SBCs
  • Sensors & Modules
  • IoT & Wireless
  • Drone & FPV
  • 3D Printing
  • Filaments & Resins
  • Motors & Drivers
  • Power & Batteries
  • Semiconductors
  • Passive
  • Displays & LEDs
  • Switches & Relays
  • Wires & Cables
  • Prototyping
  • Tools & Test
  • Robotics
  • STEM Kits
  • Atal Tinkering Lab
  • Mechanical Parts
  • Audio

Orders

  • Track your order
  • Help & support
  • Shipping and delivery
  • Refunds and cancellation
  • Contact us

Learn

  • Projects
  • Geeko AI project assistant
  • Learning paths
  • Guides
  • Calculators
  • Electrolark: free guided builds

Part tools

  • Part finder
  • Compare parts
  • Will it work with my board?

Institutions

  • Classroom kits
  • Atal Tinkering Lab
  • Students & teachers
  • Workshops & Events

Business

  • Business & education
  • Request a quotation
  • BOM bulk upload
  • Quick order by SKU

Company

  • About Geekobot
  • Community
  • Gift cards
  • Terms & conditions
  • Privacy policy
  • Product directory
  • Sitemap

© 2026 Geekobot, a trade name of OLatus Systems Private Limited. All rights reserved.

20, 1st Floor, Neeladri Complex, 10th Cross, Sampige Rd, 2nd Main, Malleshwaram, Bengaluru, Karnataka 560003 · GSTIN 29AACCO0462F1ZM

+91 91810 15607 · connect@geekobot.in · Monday to Saturday, 10 AM to 2 PM IST

UPI · CARDS · NETBANKING · GST INVOICES

ShopProjectsGeeko AIGuides
Compare 0 parts →
Log in

Shop by category

Shop all components
  • Boards & SBCs1,910 products
    • Alternative Single Board Computers
    • Arduino Ecosystem
    • FPGA & Logic Boards
    • Microcontroller & Wireless Boards
    View all
  • Sensors & Modules4,701 products
    • Biomedical & Heart Rate
    • Current, Voltage & Power
    • Force, Weight & Pressure
    • Gas, Weather & Environmental
    View all
  • IoT & Wireless2,314 products
    • RF Modules
    • RFID & NFC
    • Antennas & RF Accessories
    • Cameras & Smart Vision
    View all
  • Drone & FPV3,558 products
    • Flight Control & Navigation
    • FPV Video & Optics
    • Frames & Structural Parts
    • Motors & Propulsion
    View all
  • 3D Printing2,204 products
    • 3D Printers
    • 3D Scanners & Digitizers
    • Laser Engravers & Cutters
    • Material Management & Upgrades
    View all
  • Filaments & Resins1,472 products
    • Filaments
    • Photopolymer Resins
    View all
  • Motors & Drivers463 products
    • BLDC Motor Drivers
    • DC & Geared Motors
    • DC Motor Drivers
    • Linear Actuators & Solenoids
    View all
  • Power & Batteries557 products
    • Battery Holders & Connectors
    • Breadboard Power
    • Chargers & BMS
    • DC-DC Converters
    View all
  • Semiconductors295 products
    • Diodes & Rectifiers
    • Interface & RF Encoder ICs
    • Logic ICs (74xx)
    • Logic ICs (CD4000)
    View all
  • Passive67 products
    • Capacitors
    • Circuit Protection
    • Crystals & Oscillators
    • Inductors
    View all
  • Displays & LEDs572 products
    • 7-Segment & Dot Matrix
    • Addressable LEDs
    • Character LCDs
    • Graphic LCDs
    View all
  • Switches & Relays184 products
    • Keypads & Touch
    • Push Buttons & Tactile
    • Relay Modules
    • Relays
    View all
  • Wires & Cables233 products
    • Board-to-Wire Connectors
    • Crimp & Splice
    • Headers & Dupont
    • Heat Shrink & Sleeving
    View all
  • Prototyping101 products
    • Breadboards
    • Interface Modules
    • PCBs & Perfboards
    View all
  • Tools & Test717 products
    • Bench Power Supplies
    • Hand Tools
    • Measuring Tools
    • Meters & Testers
    View all
  • Robotics180 products
    • Humanoid & Legged Robots
    • Robot Chassis & Platforms
    • Robotic Arms & Grippers
    • Wheels & Casters
    View all
  • STEM Kits268 products
    • Arduino Learning Kits
    • Coding & IoT Kits
    • Early Coding (Ages 3-8)
    • Invention Kits
    View all
  • Atal Tinkering Lab196 products
    • Package 1: Electronics, Robotics, IoT and Sensors
    • Package 2: Rapid Prototyping Tools
    • Package 3: Mechanical, Electrical and Measurement Tools
    • Package 4: Power Supply, Accessories and Safety Equipment
    View all
  • Mechanical Parts212 products
    • Bearings
    • Brackets & Mounts
    • Couplers
    • Fasteners & Standoffs
    View all
  • Audio109 products
    • Amplifier Modules
    • Buzzers & Sirens
    • Speakers
    View all
  1. Home
  2. ›Projects
  3. ›Cylinder weight alarm

Sensor projects

Gas cylinder remaining weight alarm

A platform scale under the LPG cylinder that beeps when only about 2 kg of gas is left.

By Geekobot Learning Team

Intermediate
Difficulty
3 hours
Build time
₹497
Parts cost
7
Parts
Arduino
Platform
Add all parts · ₹497Start building
  • Home automation
  • Measurement & tools
  • Energy & power
UNO23.5°C 61%STATUS OK
Tap a part to see what it does
OverviewPartsWiringBuildCodeTroubleshootFAQIdeas

What you'll build

You cannot tell how much gas is left by looking at a cylinder. A 50 kg load cell platform under it weighs the whole thing: the empty weight is printed on the collar, and the alarm beeps when the total falls to the empty weight plus about 2 kg, so you can book the refill before the stove goes out in the middle of a meal.

What you'll learn

  • Active vs passive buzzers
  • Character displays and I²C backpacks
  • Strain gauges, amplifiers and calibration factors
Safety

Keep the load cell and board away from the valve and hose; only the cylinder stands on the platform.

Use a stable, level platform and a cylinder guard so it cannot tip.

This is a learning project, not a certified gas or smoke alarm. Keep a certified alarm installed.

  1. Sense4 x 50 kg load cells + HX711
  2. ThinkArduino Uno runs the sketch
  3. Act16x2 LCD (I²C), Active buzzer

Parts list

Tick anything you already have and the total updates.

PartQtyPrice
  • UNO
    Uno R3 CH340G ATmega328p Compatible Development Board
    GB-SBCD-0329Guide

    The brain of the project

    × 1₹204₹204
  • Arduino USB-A to USB-B Data Cable for UNO/MEGA
    GB-SBCD-0122

    Connects the Uno to your computer to upload code and power it

    × 1₹51₹51
  • HX711 with 4 × 50 kg Half-Bridge Load Cells and Combinator Board
    GB-PROT-0018-03

    Four half-bridge cells under the platform corners share the load, so the scale reads up to 200 kg

    × 1₹39₹39
  • 23.5°C 61%STATUS OK
    LCD1602 16x2 Character LCD (blue, with I2C adapter)
    GB-DISP-0001-03

    Classic 16-character, 2-line LCD with an I²C backpack, so it needs only two signal wires.

    × 1₹109₹109
  • Active Buzzer Module 3.3–5V
    GB-AUDO-0001Guide

    Active buzzer with a built-in oscillator: apply power and it beeps at about 2.3 kHz.

    × 1₹27₹27
  • Solderless Breadboard (830 points)
    GB-PROT-0001Guide

    Holds everything together without soldering

    × 1₹18₹18
  • Dupont Jumper Wires (40 pcs)
    GB-WIRE-0001Guide

    Connects the parts

    × 1₹49₹49

Complete kit

7 of 7 parts in one tap

₹497

GST included

3% off these parts while the whole kit stays in your cart

Parts you still need

₹497

7 of 7 parts. Tick anything you already have.

About ₹14,910 before bulk pricing for 30 kits.

Request bulk quote

Tools you'll need

  • Digital Multimeter
  • Wire Stripper and Cutter

Learn the parts

  • Atal Tinkering Lab (ATL)
  • Active vs Passive Buzzers
  • Arduino Uno

Calculators for this build

  • HX711 load cell calibration calculator
  • Electricity cost calculator
  • I²C pull-up resistor calculator

Wiring

Follow the colours: red is power, dark grey is ground, blue is a signal.

PartPinConnect toNote
4 x 50 kg load cells + HX711VCC5V
4 x 50 kg load cells + HX711GNDGND
4 x 50 kg load cells + HX711DTD2
4 x 50 kg load cells + HX711SCKD3
16x2 LCD (I²C)VCC5V
16x2 LCD (I²C)GNDGND
16x2 LCD (I²C)SDAA4
16x2 LCD (I²C)SCLA5
Active buzzerVCC5V
Active buzzerGNDGND
Active buzzerI/OD4
  • 4 x 50 kg load cells + HX711VCC → 5V
  • 4 x 50 kg load cells + HX711GND → GND
  • 4 x 50 kg load cells + HX711DT → D2
  • 4 x 50 kg load cells + HX711SCK → D3
  • 16x2 LCD (I²C)VCC → 5V
  • 16x2 LCD (I²C)GND → GND
  • 16x2 LCD (I²C)SDA → A4
  • 16x2 LCD (I²C)SCL → A5
  • Active buzzerVCC → 5V
  • Active buzzerGND → GND
  • Active buzzerI/O → D4
Built it? Check your wiring before you power up.Pick the pin each wire went to and we'll point out swapped pins, power mistakes and pins that clash.

Step-by-step build

0 of 9 done

Code

gas_cylinder_weight_remaining_alarm.inoVerify & upload in Electrolark
// Gas cylinder remaining weight alarm
// Geekobot project library · board: Arduino Uno
// Wiring diagram, parts list and build steps: Geekobot project page "gas-cylinder-weight-remaining-alarm"

#include <HX711.h>
#include <Wire.h>
#include <LiquidCrystal_I2C.h>

// ---- pins ----
const uint8_t HX_DT = 2;
const uint8_t HX_SCK = 3;
const uint8_t BUZZER_PIN = 4;

HX711 scale;
const float CALIBRATION = 420.0;  // raw units per gram: calibrate with a known weight
LiquidCrystal_I2C lcd(0x27, 16, 2);

// ---- latest readings ----
float grams = 0;

const unsigned long READ_EVERY_MS = 500;
unsigned long lastRead = 0;
bool alertOn = false;
const char* statusText = "Starting";
const float ALERT_LEVEL = 17000;   // an empty domestic cylinder weighs about 15 kg; this warns at about 2 kg of gas left
const float HYSTERESIS = 500;    // gap that stops rapid on/off switching

void setBuzzer(bool on) { digitalWrite(BUZZER_PIN, on ? HIGH : LOW); }

void updateDisplay() {
  lcd.setCursor(0, 0);
  lcd.print(F("Weight "));
  lcd.print(grams, 0);
  lcd.print(F(" g"));
  lcd.print(F("      "));
  lcd.setCursor(0, 1);
  lcd.print(statusText);
  lcd.print(F("        "));
}

void evaluate() {
  if (!alertOn && grams < ALERT_LEVEL) alertOn = true;
  else if (alertOn && grams > ALERT_LEVEL + HYSTERESIS) alertOn = false;
  statusText = alertOn ? "REFILL SOON" : "OK";
}

void setup() {
  Serial.begin(115200);
  scale.begin(HX_DT, HX_SCK);
  scale.set_scale(CALIBRATION);
  scale.tare();  // empty platform = 0 g
  lcd.init();
  lcd.backlight();
  pinMode(BUZZER_PIN, OUTPUT);
  setBuzzer(false);
}

void loop() {
  if (millis() - lastRead >= READ_EVERY_MS) {
    lastRead = millis();
    grams = scale.get_units(5);
    evaluate();
    Serial.print(F("Weight="));
    Serial.print(grams, 0);
    Serial.print(F("g"));
    Serial.print(F(", status=")); Serial.println(statusText);
    updateDisplay();
  }
  setBuzzer(alertOn && (millis() / 250) % 2 == 0);   // intermittent beep
}

Run it: what this code does

The sketch above runs here on a simulated Arduino Uno. Move the sliders for the sensors and buttons it reads, and watch the Serial monitor, display and outputs change.

Troubleshooting

Weight drifts slowly+

Let it warm up for a minute and avoid touching the wires; re-tare after warm-up.

Weight is wrong by a fixed factor+

Place a known weight and adjust CALIBRATION until the reading matches.

Backlight on but no text+

Adjust the contrast pot on the backpack. If still blank, change 0x27 to 0x3F.

Beeps constantly at power-up+

Low-triggered module: invert the logic in setBuzzer().

Nothing happens after uploading+

Open the Serial Monitor at 115200 baud and check for messages. Make sure you chose the right board and port in the Arduino IDE.

Upload fails+

Close other programs using the serial port, try another USB cable (some are charge-only) and press reset just before uploading.

FAQ

What is the HYSTERESIS setting for?+

It stops the output flickering on and off when the reading hovers right at the limit. The output switches on at ALERT_LEVEL and only switches off once the reading has moved back by the hysteresis amount.

Can I use an ESP32 instead of the Arduino?+

Yes. Most of the code works unchanged on an ESP32 with the ESP32 board package. Watch for 5 V modules: ESP32 pins are 3.3 V, so 5 V output signals need a resistor divider.

How do I power it without a computer?+

Use a 5 V USB phone charger or a power bank into the board's USB port.

What parts do I need to build the gas cylinder remaining weight alarm?+

7 parts: Uno R3 CH340G ATmega328p Compatible Development Board, Arduino USB-A to USB-B Data Cable for UNO/MEGA, HX711 with 4 × 50 kg Half-Bridge Load Cells and Combinator Board, LCD1602 16x2 Character LCD (blue, with I2C adapter), Active Buzzer Module 3.3–5V, Solderless Breadboard (830 points) and Dupont Jumper Wires (40 pcs). Tools: Digital Multimeter and Wire Stripper and Cutter. On this page you can tick the parts you already have and add only the rest to your cart.

How hard is it and how long does it take?+

It is a intermediate project and takes about 3 hours. The build on this page has 9 steps.

Do I need to write the code myself?+

No. This page has the complete, tested code (gas_cylinder_weight_remaining_alarm.ino). Install these libraries first: HX711 and LiquidCrystal I2C.

Can I see what the code does before I build it?+

Yes. The Run it panel under the code runs this exact sketch on a simulated board. Move the sliders or press the buttons for the sensors it reads, and the Serial monitor, display and outputs react as they will on the real build. It is a simulation, so real readings depend on your parts and wiring.

How much does the gas cylinder remaining weight alarm cost to build?+

About ₹497 for the parts at the prices on this page, plus tools if you do not have them. Quantity price breaks lower the cost when you build several.

What will I learn from this project?+

Active vs passive buzzers; Character displays and I²C backpacks; Strain gauges, amplifiers and calibration factors.

Is it safe to build?+

Keep the load cell and board away from the valve and hose; only the cylinder stands on the platform. Use a stable, level platform and a cylinder guard so it cannot tip. This is a learning project, not a certified gas or smoke alarm. Keep a certified alarm installed.

What can I build next with these parts?+

Ideas that reuse this build: Wi-Fi weighing scale and Kitchen LPG logger. They are listed under Take it further on this page.

Take it further

  • Wi-Fi weighing scale
  • Kitchen LPG logger

Related projects

  • UNO
    Sensor
    Beginner· 1 hour

    LPG gas leak alarm

    A kitchen gas sniffer that beeps and flashes the moment LPG levels climb.

    ₹505 · 8 partsArduino
  • NANO
    Sensor
    Beginner· 1–2 hours

    Smoke alarm with OLED readout

    See the smoke level live on a crisp screen and get a loud warning when it spikes.

    ₹539 · 6 partsArduino
  • UNO
    Sensor
    Beginner· 45 minutes

    Flame detector fire alarm

    An infrared eye that spots an open flame and raises the alarm.

    ₹434 · 8 partsArduino
  • UNO
    Sensor
    Beginner· 1 hour

    PIR intruder alarm

    Walk into the room and it sounds the alarm: the classic first security build.

    ₹459 · 8 partsArduino

Learning project. Check every circuit and the datasheet of each part before you power it up.

Run itChange the inputs and watch the output
Weight 500 g
REFILL SOON
Active buzzer (D4) 2400 Hz
Serial monitor115200 baud
Weight=500g, status=REFILL SOON
Weight=500g, status=REFILL SOON
Weight=500g, status=REFILL SOON
Weight=500g, status=REFILL SOON
Weight=500g, status=REFILL SOON

A simulation of the sketch above, so you know what to expect. Real readings vary with your parts and wiring.

Ask the Community

Ask a question Share your build