Shop by category
Shop all componentsPower, batteries & solar
kWh per day = W × hours ÷ 1000Cost = kWh × tariffA 3D printer averaging 120 W for 8 hours a day uses 0.96 kWh (units) a day. At ₹8 per unit that is ₹7.68 a day, about ₹230 a month.
One unit on an Indian electricity bill is one kilowatt-hour: 1000 watts for one hour. Multiply a device’s average power by the hours it runs to see what it really costs.
Use the average power, not the peak. A 3D printer’s heated bed draws a lot while warming up and much less once at temperature; a plug-in energy meter gives the true figure.
kWh = watts × hours ÷ 1000, then multiply by your tariff. A 100 W device running 10 hours uses 1 kWh.
A typical 3D printer averages 100 to 150 W, so a 10-hour print uses 1 to 1.5 kWh.
On your electricity bill as the rate per unit. One unit is 1 kWh.
kWh per day = W × hours ÷ 1000; Cost = kWh × tariff.
A 3D printer averaging 120 W for 8 hours a day uses 0.96 kWh (units) a day. At ₹8 per unit that is ₹7.68 a day, about ₹230 a month.
Geekobot builds that use it include Wi-Fi inverter room temperature monitor, Battery charge level ring, Wi-Fi fridge temperature monitor and Wi-Fi geyser temperature. Each has the full parts list, wiring and code.
Results are estimates for design and learning. Check critical designs against the component datasheet. Made by the Geekobot Learning Team. How we write our calculators