Shop by category
Shop all componentsPower, batteries & solar
E = ½ × C × V²Q = C × VE usable = ½ × C × (V1² − V2²)t = E usable ÷ PA 1 F supercap charged to 5 V holds ½ × 1 × 25 = 12.5 J. Down to 3 V it gives 8 J, so it keeps a 0.5 W load alive for 16 seconds, enough to save data before power loss.
A capacitor stores energy in its electric field, rising with the square of the voltage. Supercapacitors hold far more than ordinary capacitors and can keep a real-time clock or microcontroller alive through short power cuts.
Only the energy between the full voltage and the lowest voltage your circuit tolerates is usable. Put supercaps in series for higher voltage with balancing resistors, and limit inrush current when charging them from a small supply.
E = ½ × C × V². A 1 F supercapacitor at 5 V stores 12.5 J.
Use the usable energy between full and minimum voltage, E = ½ × C × (V1² − V2²), and divide by the load power.
Only for short backup. It stores far less energy than a battery of the same size, but charges fast and lasts many more cycles.
E = ½ × C × V²; Q = C × V; E usable = ½ × C × (V1² − V2²); t = E usable ÷ P.
A 1 F supercap charged to 5 V holds ½ × 1 × 25 = 12.5 J. Down to 3 V it gives 8 J, so it keeps a 0.5 W load alive for 16 seconds, enough to save data before power loss.
Geekobot builds that use it include 555 timer LED flasher, Two-transistor LED flasher (astable multivibrator), Dust sensor air monitor and Dust level colour ring. Each has the full parts list, wiring and code.
Results are estimates for design and learning. Check critical designs against the component datasheet. Made by the Geekobot Learning Team. How we write our calculators