Shop by category
Shop all components3D printing
Area = π × (d ÷ 2)²Length = mass ÷ (density × area)Mass = length × area × densityA 1 kg spool of 1.75 mm PLA: area 0.0241 cm², volume 806 cm³, length = 806 ÷ 0.0241 = 335 m. That is about 3 g per metre.
Slicers report filament as length or weight, and spools are sold by weight. Converting tells you whether a part-used spool will finish a long print. Density differs by material, so 1 kg of ABS is about 20% longer than 1 kg of PLA.
Weigh a part-used spool and subtract the empty spool weight (often 150–250 g) to find what is left.
About 330 m of 1.75 mm PLA. PETG gives about 325 m and ABS about 400 m because their densities differ.
Mass = length × cross-section area × density. For 1.75 mm PLA, 1 m weighs about 3 g.
Area grows with the square of diameter, so 2.85 mm filament has about 2.65 times more plastic per metre than 1.75 mm.
Area = π × (d ÷ 2)²; Length = mass ÷ (density × area); Mass = length × area × density.
A 1 kg spool of 1.75 mm PLA: area 0.0241 cm², volume 806 cm³, length = 806 ÷ 0.0241 = 335 m. That is about 3 g per metre.
Results are estimates for design and learning. Check critical designs against the component datasheet. Made by the Geekobot Learning Team. How we write our calculators