Shop by category
Shop all componentsPower, batteries & solar
Datasheet values are for natural convection; a fan can cut the heatsink’s thermal resistance by half or more.
θ total = (Tj − Ta) ÷ Pθ sa = θ total − θ jc − θ csTj = Ta + P × (θ jc + θ cs + θ sa)5 W in a TO-220 package (θjc 3 °C/W) with paste (θcs 0.5), 40 °C ambient and a 100 °C limit: θ total = 60 ÷ 5 = 12 °C/W, so the heatsink must be 8.5 °C/W or lower: a medium extruded heatsink.
Heat flows from the silicon junction through the package, the thermal interface and the heatsink into the air. Each step has a thermal resistance in °C per watt, and the temperatures add up like voltages in resistors.
Smaller numbers mean a better heatsink. Always use thermal paste or a pad, and mount power parts with the right torque. If the calculation asks for something huge, it is usually cheaper to cut the power loss, for example with a buck converter instead of a linear regulator.
Find θ sa = (Tj max − Ta) ÷ P − θ jc − θ cs, then choose a heatsink with a lower °C/W rating.
How much hotter the heatsink gets per watt. A 5 °C/W heatsink rises 25 °C above ambient at 5 W.
Yes. Paste or a thermal pad lowers θ cs, the resistance between the part and the heatsink.
θ total = (Tj − Ta) ÷ P; θ sa = θ total − θ jc − θ cs; Tj = Ta + P × (θ jc + θ cs + θ sa).
5 W in a TO-220 package (θjc 3 °C/W) with paste (θcs 0.5), 40 °C ambient and a 100 °C limit: θ total = 60 ÷ 5 = 12 °C/W, so the heatsink must be 8.5 °C/W or lower: a medium extruded heatsink.
Geekobot builds that use it include Shoe cabinet odour fan, Wi-Fi bathroom humidity fan, One big button for the light and fan and Presence fan controller. Each has the full parts list, wiring and code.
Results are estimates for design and learning. Check critical designs against the component datasheet. Made by the Geekobot Learning Team. How we write our calculators