Shop by category
Shop all componentsTiming, filters & signals
f₀ = 1 ÷ (2π × √(R1 × R2 × C1 × C2))Q = √(R1 R2 C1 C2) ÷ (C2 × (R1 + R2))Butterworth: R1 = R2 = 1 ÷ (2π × fc × C2 × √2), C1 = 2 × C2For a 1 kHz Butterworth filter with C2 = 10 nF and C1 = 20 nF: R = 1 ÷ (2π × 1000 × 10 nF × 1.414) = 11.25 kΩ. With the nearest E96 resistor, 11.3 kΩ, the cutoff is 996 Hz.
A Sallen-Key filter uses one op-amp, two resistors and two capacitors to make a second-order low-pass filter that rolls off twice as fast as a single RC stage. It is popular for anti-aliasing before an ADC and for cleaning audio.
The Q factor decides the shape of the response. Q = 0.707 gives the flattest passband (Butterworth); higher Q gives a peak before the roll-off. Choose an op-amp whose gain-bandwidth is at least 100 times the cutoff frequency.
A second-order active filter that uses one op-amp, two resistors and two capacitors, rolling off at 40 dB per decade.
The flattest passband with no ripple, Q = 0.707. The calculator gives Butterworth values.
It gives a sharper cutoff and can drive a load without the filter changing.
f₀ = 1 ÷ (2π × √(R1 × R2 × C1 × C2)); Q = √(R1 R2 C1 C2) ÷ (C2 × (R1 + R2)); Butterworth: R1 = R2 = 1 ÷ (2π × fc × C2 × √2), C1 = 2 × C2.
For a 1 kHz Butterworth filter with C2 = 10 nF and C1 = 20 nF: R = 1 ÷ (2π × 1000 × 10 nF × 1.414) = 11.25 kΩ. With the nearest E96 resistor, 11.3 kΩ, the cutoff is 996 Hz.
Geekobot builds that use it include Dark detector with an LM358 comparator and LM358 comparator with two knobs. Each has the full parts list, wiring and code.
Results are estimates for design and learning. Check critical designs against the component datasheet. Made by the Geekobot Learning Team. How we write our calculators