Shop by category
Shop all componentsTiming, filters & signals
Always fit a flyback diode across relay and solenoid coils: the stored energy appears as a high-voltage spike at switch-off.
τ = L ÷ RI(t) = (V ÷ R) × (1 − e^(−t/τ))E = ½ × L × I²10 mH with 100 Ω total resistance: τ = 0.01 ÷ 100 = 100 µs. On 12 V the final current is 120 mA, reached (99%) after about 460 µs.
An inductor resists changes in current. Connect it to a supply and the current rises along the same curve as a charging capacitor, with a time constant of L divided by the total series resistance, including the coil’s own winding resistance.
This matters for relay and solenoid drivers, stepper motor current control and switching converters. When the current is switched off quickly, the inductor’s stored energy appears as a voltage spike, which is why driver circuits need flyback diodes.
τ = L ÷ R. After one time constant the current in the coil reaches about 63 % of its final value V ÷ R.
When the current is switched off, the stored energy ½ × L × I² produces a voltage spike. A flyback diode across the coil gives that current a safe path.
About five time constants, 5 × L ÷ R.
τ = L ÷ R; I(t) = (V ÷ R) × (1 − e^(−t/τ)); E = ½ × L × I².
10 mH with 100 Ω total resistance: τ = 0.01 ÷ 100 = 100 µs. On 12 V the final current is 120 mA, reached (99%) after about 460 µs.
Geekobot builds that use it include Wi-Fi smart switch, Pico W Wi-Fi switch (MicroPython), Touch lamp switch and Wi-Fi dusk light with manual override. Each has the full parts list, wiring and code.
Results are estimates for design and learning. Check critical designs against the component datasheet. Made by the Geekobot Learning Team. How we write our calculators