Shop by category
Shop all componentsTiming, filters & signals
t = 1.1 × R × CR = t ÷ (1.1 × C)R = 100 kΩ and C = 10 µF: t = 1.1 × 100,000 × 0.00001 = 1.1 s.
In monostable mode the 555 produces one pulse of fixed length each time pin 2 is pulled low. It is used for timed lights, debounced buttons, delay-off circuits and pulse stretching.
For long delays, keep R below about 1 MΩ and increase C instead, and use a low-leakage capacitor, because leakage current in big electrolytics makes long delays inaccurate.
t = 1.1 × R × C. 100 kΩ and 10 µF give about 1.1 seconds.
Pulling pin 2 below one third of the supply starts the pulse. Keep the trigger shorter than the pulse you want.
Several minutes with a large electrolytic capacitor, but leakage makes long delays inaccurate. For long, precise delays use a microcontroller.
t = 1.1 × R × C; R = t ÷ (1.1 × C).
R = 100 kΩ and C = 10 µF: t = 1.1 × 100,000 × 0.00001 = 1.1 s.
Geekobot builds that use it include 555 timer LED flasher, 555 continuity tester that beeps, Push-button timed light with a 555 and 555 tone generator with a pitch knob. Each has the full parts list, wiring and code.
Results are estimates for design and learning. Check critical designs against the component datasheet. Made by the Geekobot Learning Team. How we write our calculators