Shop by category
Shop all componentsTiming, filters & signals
Sine: Vrms = Vpk ÷ √2 = 0.707 × Vpk, Vavg = 2 × Vpk ÷ π = 0.637 × VpkSquare: Vrms = Vavg = VpkTriangle: Vrms = Vpk ÷ √3, Vavg = Vpk ÷ 2Vpp = 2 × VpkIndian mains is 230 V RMS: the peak is 230 × 1.414 = 325.3 V and the peak-to-peak is 650.5 V. That is why a rectified, smoothed 230 V supply charges its capacitors to about 325 V.
RMS is the voltage of a steady DC supply that would heat a resistor equally. A multimeter in AC mode reports RMS (for sine waves), while an oscilloscope shows peak and peak-to-peak.
Many cheap multimeters assume a sine wave, so they read wrong for square and PWM signals. Use a true-RMS meter or an oscilloscope for non-sinusoidal signals.
For a sine wave, Vpk = Vrms × √2. 230 V RMS mains peaks at about 325 V.
Cheap meters assume a sine wave. Use a true-RMS meter for square or PWM signals.
Twice the peak for symmetrical waves, from the lowest point to the highest.
Sine: Vrms = Vpk ÷ √2 = 0.707 × Vpk, Vavg = 2 × Vpk ÷ π = 0.637 × Vpk; Square: Vrms = Vavg = Vpk; Triangle: Vrms = Vpk ÷ √3, Vavg = Vpk ÷ 2; Vpp = 2 × Vpk.
Indian mains is 230 V RMS: the peak is 230 × 1.414 = 325.3 V and the peak-to-peak is 650.5 V. That is why a rectified, smoothed 230 V supply charges its capacitors to about 325 V.
Results are estimates for design and learning. Check critical designs against the component datasheet. Made by the Geekobot Learning Team. How we write our calculators