How-to · Intermediate · 3 min read
SDR Receivers
RTL-SDR, Nooelec and SDRplay for Radio Experiments
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
A software-defined radio (SDR) is a USB receiver that lets your computer tune and decode a wide range of radio signals. RTL-SDR dongles are the cheapest start; SDRplay receivers add 14-bit quality and wider coverage. Use them to track aircraft (ADS-B), listen to FM and airband, read 433 MHz sensors and receive weather satellites. A good antenna and the right software matter more than the dongle itself.
Key specs at a glance
- RTL-SDR V3 / NESDR
- About 0.5 to 1700 MHz with an R820T2 tuner; TCXO models drift less
- HF
- Direct sampling or upconverter for shortwave
- SDRplay RSP
- 14-bit, 1 kHz to 2 GHz class receivers
- Software
- SDR#, GQRX, SDR++, dump1090, rtl_433
- Interface
- USB 2.0, SMA antenna connector
- Transmit
- None: these are receive-only
Which receiver
Pick by the signals you want.
| Receiver | Strengths | Best for |
|---|---|---|
| RTL-SDR Blog V3 | TCXO, HF direct sampling, bias-T | Beginners and general use |
| Nooelec NESDR SMArt v5 | Stable, simple, enclosed | ADS-B, FM, airband |
| Nooelec NESDR SMArt HF bundle | Includes HF upconverter | Shortwave listening |
| SDRplay RSP1B / RSPdxR2 | 14-bit, wide coverage | Serious listening and research |
| SDRplay RSPduo | Dual tuner | Two signals at once |
| Cynthion | USB protocol analyser and FPGA tool | USB debugging, not a radio |
- RTL-SDR Blog V3
- Strengths:
- TCXO, HF direct sampling, bias-T
- Best for:
- Beginners and general use
- Nooelec NESDR SMArt v5
- Strengths:
- Stable, simple, enclosed
- Best for:
- ADS-B, FM, airband
- Nooelec NESDR SMArt HF bundle
- Strengths:
- Includes HF upconverter
- Best for:
- Shortwave listening
- SDRplay RSP1B / RSPdxR2
- Strengths:
- 14-bit, wide coverage
- Best for:
- Serious listening and research
- SDRplay RSPduo
- Strengths:
- Dual tuner
- Best for:
- Two signals at once
- Cynthion
- Strengths:
- USB protocol analyser and FPGA tool
- Best for:
- USB debugging, not a radio
Things to try
see aircraft positions with dump1090.
receive images with a simple V-dipole.
decode 433 MHz weather stations and sensors; useful when planning 433 MHz RF projects.
listen on SDR software.
see what your own devices transmit, for example to debug sub-GHz radios.
Antennas matter
The antenna decides what you can receive. Start with the telescopic dipole in the kit and cut it to quarter-wave length (see the antenna length tool), then add a tuned antenna for each band; see choosing an antenna. Keep it outdoors or at a window with a clear view and use short, good-quality coax.
Rules
Receiving is legal in most countries for open signals, but laws differ on decoding private or encrypted communications. Do not decode or act on signals you are not permitted to use. These devices are receive-only and cannot transmit.
Try it: Antenna length calculator
Change the values and the diagram and results update as you type.
Common mistakes to avoid
- Expecting great results with the stock antenna indoors.
- Overloading the receiver near strong FM or mobile towers.
- Forgetting the bias-T setting for powered antennas.
- Running the dongle on a long, thin USB cable.
- Ignoring local laws on decoding signals.
Frequently asked questions
What can an RTL-SDR do?
Receive many radio signals between roughly 0.5 and 1700 MHz.
Can an SDR transmit?
No. These receivers are listen-only.
Do I need a TCXO?
It reduces drift and helps with narrow signals.
Which software should I use?
SDR#, GQRX or SDR++.
Is it legal?
Listening is legal in most places, but check rules about decoding.
Parts for this guide
Calculators
Terms in this guide
Projects that use it
Put this into practice: 1 step-by-step build in our project library uses parts from this guide.
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.






