Shop by category
Shop all components
Temperature & Thermal Sensors · Generic
The BME680 Stainless Steel Probe is a high-precision environmental sensor module measuring temperature, humidity, and barometric pressure via I2C communication. It is compatible with 3.3V and 5V logic systems, including Arduino, Raspberry Pi, ESP32, and industrial PLCs, and features a durable 1-meter cable for flexible installation.
📖Guide for this partBME680 Environmental Sensor→Buy 10 or more to pay ₹1,614.05 each
Business and institution accounts get extra tier pricing. Sign in for 100+ pieces.
Ships in 2-4 weeks
We source this item for your order. It is dispatched within 2 to 4 weeks; if we cannot get it, we cancel it and refund you in full. Prepaid only.
Overview
The BME680 probe integrates Bosch Sensortec’s advanced MEMS environmental sensor within a robust stainless steel housing, providing reliable multi-parameter sensing. It utilizes a digital I2C interface for stable, noise-immune communication, outputting calibrated data for temperature, relative humidity, and atmospheric pressure. The sealed probe design offers protection against environmental factors, making it suitable for extended use in varied conditions.
This sensor is engineered for direct integration into data acquisition systems, IoT nodes, and industrial monitoring setups. Its 1-meter cable allows for flexible placement relative to the control electronics, while the wide operating temperature range ensures functionality from -40°C to +85°C. The module requires minimal signal conditioning, providing a plug-and-play solution for precise environmental data logging and control applications.
Good for
Category
Temperature & Thermal SensorsSKU
GB-SENS-3816
| Brand / part no. | Generic |
|---|---|
| Category | Temperature & Thermal Sensors |
| Cable Type | 4-wire shielded |
| Cable Length | 1 Meter |
| Sensor Model | BME680 |
| Humidity Range | 0% to 100% RH |
| Pressure Range | 300 hPa to 1100 hPa |
| Weight (approx.) | 21 g |
| Humidity Accuracy | ±0.3% RH |
| Operating Voltage | 3.0 VDC to 3.6 VDC (5V logic tolerant) |
| Temperature Range | -40°C to +85°C |
| Temperature Accuracy | ±0.5°C |
| Operating Temperature | -40°C to +85°C |
| Measurement Parameters | Temperature, Relative Humidity, Barometric Pressure |
| Probe Housing Material | Stainless Steel |
| Communication Interface | I2C (IIC) |
Typical values from the manufacturer's datasheet. Confirm the exact variant before you build a product around it.
| VCC | Power, 3.3–5 V (module) |
|---|---|
| GND | Ground |
| SCL | I²C clock / SPI SCK |
| SDA | I²C data / SPI MOSI |
| SDO | SPI MISO, or I²C address select (GND 0x76, VCC 0x77) |
| CS | SPI chip select. Leave high for I²C |
Typical pin names. Boards from different makers can differ, so check the print on your module.
Library: Adafruit BME680 library (Arduino) or Bosch BSEC2 for IAQ
#include <Adafruit_BME680.h>
Adafruit_BME680 bme; // I²C, address 0x77
void setup() {
Serial.begin(115200);
if (!bme.begin()) { Serial.println("BME680 not found"); while (1); }
bme.setGasHeater(320, 150); // 320 °C for 150 ms
}
void loop() {
if (bme.performReading()) {
Serial.printf("%.1f °C %.0f %%RH %.0f hPa gas %lu Ω\n",
bme.temperature, bme.humidity, bme.pressure / 100.0, bme.gas_resistance);
}
delay(2000);
}Step-by-step builds that use parts from Temperature & Thermal Sensors.
Category: Temperature & Thermal Sensors; Cable Type: 4-wire shielded; Cable Length: 1 Meter; Sensor Model: BME680; Humidity Range: 0% to 100% RH; Pressure Range: 300 hPa to 1100 hPa. The full list is under Specifications.
VCC: Power, 3.3–5 V (module); GND: Ground; SCL: I²C clock / SPI SCK; SDA: I²C data / SPI MOSI; SDO: SPI MISO, or I²C address select (GND 0x76, VCC 0x77); CS: SPI chip select. Leave high for I²C. These are the typical pin names shown under Pinout & wiring. Boards from different makers can differ, so check the print on your module.
Adafruit BME680 library (Arduino) or Bosch BSEC2 for IAQ. You can copy the example code from this page.
Yes. Prices include GST and every order comes with a GST invoice. Add your GSTIN at checkout and we put it on the invoice for input credit.
Delivery is a flat ₹80 anywhere in India, and free on orders over ₹999. We ship from our Bengaluru and Guwahati warehouses, whichever is nearer to you, and the product page shows an estimated delivery date for your PIN code.
Yes, on eligible PIN codes for orders up to ₹5,000. A ₹150 COD charge is added at checkout, and checkout shows whether COD is available for your order. You can also pay by UPI, card or net banking.
Yes, if it arrives damaged, defective or is not what you ordered: tell us within 7 days of delivery and we collect it free and send a replacement or a full refund. We do not take back parts that are not faulty, so check the specs or ask us before you order. You can cancel for free until the order is dispatched.
Yes. The price per unit drops automatically at higher quantities, as shown in the price tiers above. For 100+ pieces or a purchase order, ask for a bulk quote.
Check the specifications for voltage and interface, or ask Geeko AI. It can suggest compatible boards and wiring.
Guides for this part and its category.

₹4,476.00
Incl. GST
₹15,920.00
Incl. GST
₹5,222.00
Incl. GST
₹664.00
Incl. GSTNo reviews yet. Bought or built with this? Be the first to review it.