Shop by category
Shop all components
Sub-1GHz & 2.4GHz RF Transceivers · EByte
The EByte E49-400MBL-01 is a pre-soldered testing board for the CMT2300A RF transceiver, providing a USB interface for easy evaluation of 400MHz LoRa, FSK, and GFSK communication. It’s ideal for rapid prototyping and signal range testing with Arduino and STM32 platforms.
📖Guide for this partSub-1GHz FSK Transceivers→Buy 10 or more to pay ₹1,044.05 each
Business and institution accounts get extra tier pricing. Sign in for 100+ pieces.
Ships in 2-4 weeks
We source this item for your order. It is dispatched within 2 to 4 weeks; if we cannot get it, we cancel it and refund you in full. Prepaid only.
Overview
The EByte E49-400MBL-01 Testing Board is a dedicated evaluation platform for the CMT2300A sub-1GHz RF transceiver IC. It provides engineers and developers with a fully assembled, USB-connected interface to test and characterize wireless link performance, packet error rates, and effective range in the 400MHz spectrum. The board’s design eliminates soldering hurdles, allowing immediate focus on protocol implementation and network optimization.
Architecturally, the CMT2300A chip supports a wide range of data rates and modulation schemes, including LoRa for extended range and FSK/GFSK for higher data throughput. The integrated USB-to-serial bridge facilitates seamless AT command control, firmware updates, and real-time data transmission monitoring from a computer. This makes the board an essential tool for validating RF designs before integrating the module into custom PCBs for IoT deployments in smart agriculture, industrial telemetry, and environmental monitoring systems.
| Brand / part no. | EByte |
|---|---|
| Category | Sub-1GHz & 2.4GHz RF Transceivers |
| Dimensions | Approx. 20 x 10 x 2 cm (Board with enclosure) |
| Interfaces | USB (Virtual COM Port) |
| Chipset / SoC | CMT2300A RF Transceiver |
| Supply Voltage | Via USB 5V |
| Frequency Range | 400 MHz (900 MHz variant available) |
| Antenna Connector | Pre-soldered antenna or connector (model specific) |
| Operating Current | Low Power (Chipset Dependent) |
| RF Transmit Power | Configurable (Chipset Dependent) |
| Wireless Protocols | LoRa, FSK, GFSK |
| Operating Temperature | Industrial Range (Typical for CMT2300A) |
Typical values from the manufacturer's datasheet. Confirm the exact variant before you build a product around it.
Step-by-step builds that use parts from Sub-1GHz & 2.4GHz RF Transceivers.
Category: Sub-1GHz & 2.4GHz RF Transceivers; Dimensions: Approx. 20 x 10 x 2 cm (Board with enclosure); Interfaces: USB (Virtual COM Port); Chipset / SoC: CMT2300A RF Transceiver; Supply Voltage: Via USB 5V; Frequency Range: 400 MHz (900 MHz variant available). The full list is under Specifications.
Yes. Prices include GST and every order comes with a GST invoice. Add your GSTIN at checkout and we put it on the invoice for input credit.
Delivery is a flat ₹80 anywhere in India, and free on orders over ₹999. We ship from our Bengaluru and Guwahati warehouses, whichever is nearer to you, and the product page shows an estimated delivery date for your PIN code.
Yes, on eligible PIN codes for orders up to ₹5,000. A ₹150 COD charge is added at checkout, and checkout shows whether COD is available for your order. You can also pay by UPI, card or net banking.
Yes, if it arrives damaged, defective or is not what you ordered: tell us within 7 days of delivery and we collect it free and send a replacement or a full refund. We do not take back parts that are not faulty, so check the specs or ask us before you order. You can cancel for free until the order is dispatched.
Yes. The price per unit drops automatically at higher quantities, as shown in the price tiers above. For 100+ pieces or a purchase order, ask for a bulk quote.
Check the specifications for voltage and interface, or ask Geeko AI. It can suggest compatible boards and wiring.
Guides for this part and its category.
No reviews yet. Bought or built with this? Be the first to review it.