Same-day dispatch before 2 PM · Free delivery over ₹999 · GST invoices Get the appPrices incl. GST
Geekobot
Snap & SendNEWGeeko AIWhere's myOrder
Log in
Products
  • Projects
    • Component guidesHow parts work, with code you can run
    • Learning pathsFrom your first LED to your first robot
    • Workshops & eventsOnline sessions for makers and classes
    • ElectrolarkFree guided builds, simulator and certificates
    • Students & teachersStudent discount and classroom help
    • CommunityShare builds and ask other makers
    • CalculatorsOhm's law, LED resistor, 555 and 100+ more
    • Circuit builderWire parts and run the circuit, powered by Electrolark
    • Geeko AIAsk what to buy or how to wire it
    • Snap & SendPhotograph a part or list, we find it
    • Part finderAnswer a few questions, get the right part
    • Compatibility checkWill these two parts work together?
    • Compare partsSpecs side by side
    • Business & bulk ordersGST invoices, credit and volume prices
    • Request a quotationSend your list, get a quote
    • Classroom kitsPer-student kits and lab bundles
    • Gift cardsFor students, teams and events
  • Atal Tinkering Lab
BOM to cart
Geekobot

Components, kits and know-how for makers, students, engineers, labs and businesses across India.

Ask Geeko AIOrders, parts and projects, any timeEmail supportReply within 1 working dayGet the Geekobot appAdd it to your home screen, free

Follow us

Shop

  • Boards & SBCs
  • Sensors & Modules
  • IoT & Wireless
  • Drone & FPV
  • 3D Printing
  • Filaments & Resins
  • Motors & Drivers
  • Power & Batteries
  • Semiconductors
  • Passive
  • Displays & LEDs
  • Switches & Relays
  • Wires & Cables
  • Prototyping
  • Tools & Test
  • Robotics
  • STEM Kits
  • Atal Tinkering Lab
  • Mechanical Parts
  • Audio

Orders

  • Track your order
  • Help & support
  • Shipping and delivery
  • Refunds and cancellation
  • Contact us

Learn

  • Projects
  • Geeko AI project assistant
  • Learning paths
  • Guides
  • Calculators
  • Electrolark: free guided builds

Part tools

  • Part finder
  • Compare parts
  • Will it work with my board?

Institutions

  • Classroom kits
  • Atal Tinkering Lab
  • Students & teachers
  • Workshops & Events

Business

  • Business & education
  • Request a quotation
  • BOM bulk upload
  • Quick order by SKU

Company

  • About Geekobot
  • Community
  • Gift cards
  • Terms & conditions
  • Privacy policy
  • Product directory
  • Sitemap

© 2026 Geekobot, a trade name of OLatus Systems Private Limited. All rights reserved.

20, 1st Floor, Neeladri Complex, 10th Cross, Sampige Rd, 2nd Main, Malleshwaram, Bengaluru, Karnataka 560003 · GSTIN 29AACCO0462F1ZM

+91 91810 15607 · connect@geekobot.in · Monday to Saturday, 10 AM to 2 PM IST

UPI · CARDS · NETBANKING · GST INVOICES

ShopProjectsGeeko AIGuides
Compare 0 parts →
Log in

Shop by category

Shop all components
  • Boards & SBCs1,910 products
    • Alternative Single Board Computers
    • Arduino Ecosystem
    • FPGA & Logic Boards
    • Microcontroller & Wireless Boards
    View all
  • Sensors & Modules4,701 products
    • Biomedical & Heart Rate
    • Current, Voltage & Power
    • Force, Weight & Pressure
    • Gas, Weather & Environmental
    View all
  • IoT & Wireless2,314 products
    • RF Modules
    • RFID & NFC
    • Antennas & RF Accessories
    • Cameras & Smart Vision
    View all
  • Drone & FPV3,558 products
    • Flight Control & Navigation
    • FPV Video & Optics
    • Frames & Structural Parts
    • Motors & Propulsion
    View all
  • 3D Printing2,204 products
    • 3D Printers
    • 3D Scanners & Digitizers
    • Laser Engravers & Cutters
    • Material Management & Upgrades
    View all
  • Filaments & Resins1,472 products
    • Filaments
    • Photopolymer Resins
    View all
  • Motors & Drivers463 products
    • BLDC Motor Drivers
    • DC & Geared Motors
    • DC Motor Drivers
    • Linear Actuators & Solenoids
    View all
  • Power & Batteries557 products
    • Battery Holders & Connectors
    • Breadboard Power
    • Chargers & BMS
    • DC-DC Converters
    View all
  • Semiconductors295 products
    • Diodes & Rectifiers
    • Interface & RF Encoder ICs
    • Logic ICs (74xx)
    • Logic ICs (CD4000)
    View all
  • Passive67 products
    • Capacitors
    • Circuit Protection
    • Crystals & Oscillators
    • Inductors
    View all
  • Displays & LEDs572 products
    • 7-Segment & Dot Matrix
    • Addressable LEDs
    • Character LCDs
    • Graphic LCDs
    View all
  • Switches & Relays184 products
    • Keypads & Touch
    • Push Buttons & Tactile
    • Relay Modules
    • Relays
    View all
  • Wires & Cables233 products
    • Board-to-Wire Connectors
    • Crimp & Splice
    • Headers & Dupont
    • Heat Shrink & Sleeving
    View all
  • Prototyping101 products
    • Breadboards
    • Interface Modules
    • PCBs & Perfboards
    View all
  • Tools & Test717 products
    • Bench Power Supplies
    • Hand Tools
    • Measuring Tools
    • Meters & Testers
    View all
  • Robotics180 products
    • Humanoid & Legged Robots
    • Robot Chassis & Platforms
    • Robotic Arms & Grippers
    • Wheels & Casters
    View all
  • STEM Kits268 products
    • Arduino Learning Kits
    • Coding & IoT Kits
    • Early Coding (Ages 3-8)
    • Invention Kits
    View all
  • Atal Tinkering Lab196 products
    • Package 1: Electronics, Robotics, IoT and Sensors
    • Package 2: Rapid Prototyping Tools
    • Package 3: Mechanical, Electrical and Measurement Tools
    • Package 4: Power Supply, Accessories and Safety Equipment
    View all
  • Mechanical Parts212 products
    • Bearings
    • Brackets & Mounts
    • Couplers
    • Fasteners & Standoffs
    View all
  • Audio109 products
    • Amplifier Modules
    • Buzzers & Sirens
    • Speakers
    View all
  1. Home
  2. ›Projects
  3. ›Noise meter

Audio & sound projects

Classroom noise traffic light

Shows the class how loud it is getting, from green to red.

By Geekobot Learning Team

Beginner
Difficulty
1 hour
Build time
₹438
Parts cost
6
Parts
Arduino
Platform
Add all parts · ₹438Start buildingLearn it on Electrolark
  • Learning & classroom
  • Games & fun
NANO
Tap a part to see what it does
OverviewPartsWiringBuildCodeTroubleshootFAQIdeas

What you'll build

Teachers love this one. The ring fills and changes colour with the noise level, so students can see when they are getting loud, without anyone raising their voice.

What you'll learn

  • Addressable LEDs and colour mixing
  • Sampling a waveform and measuring amplitude
  1. SenseSound sensor
  2. ThinkArduino Nano runs the sketch
  3. ActWS2812 16-LED ring

Parts list

Tick anything you already have and the total updates.

PartQtyPrice
  • NANO
    Nano CH340 Development Board (Soldered)
    GB-SBCD-0339Guide

    The brain of the project

    × 1₹185₹185
  • Analog Sound Sensor Microphone Module
    SENS-3152

    Electret microphone with an amplifier.

    × 1₹104₹104
  • WS2812 RGB LED Ring (16 LEDs)
    GB-DISP-0016-02

    Sixteen individually addressable RGB LEDs on one data wire.

    × 1₹49₹49
  • Resistor Assortment Kit (30 Values)
    GB-PASV-0002Guide

    330 Ω in series with DIN

    × 1₹33₹33
  • Solderless Breadboard (830 points)
    GB-PROT-0001Guide

    Holds everything together without soldering

    × 1₹18₹18
  • Dupont Jumper Wires (40 pcs)
    GB-WIRE-0001Guide

    Connects the parts

    × 1₹49₹49

Complete kit

6 of 6 parts in one tap

₹438

GST included

3% off these parts while the whole kit stays in your cart

Parts you still need

₹438

6 of 6 parts. Tick anything you already have.

About ₹13,140 before bulk pricing for 30 kits.

Request bulk quote

Tools you'll need

  • Digital Multimeter
  • Wire Stripper and Cutter

Learn the parts

  • ESP32 vs Arduino Uno
  • I2C Explained
  • Arduino Uno

Calculators for this build

  • Sample rate and Nyquist calculator (aliasing)
  • LED strip power calculator
  • Ohm’s law calculator

Wiring

Follow the colours: red is power, dark grey is ground, blue is a signal.

PartPinConnect toNote
Sound sensorVCC5V
Sound sensorGNDGND
Sound sensorAOA0
WS2812 16-LED ring5V5V
WS2812 16-LED ringGNDGND
WS2812 16-LED ringDIND2
  • Sound sensorVCC → 5V
  • Sound sensorGND → GND
  • Sound sensorAO → A0
  • WS2812 16-LED ring5V → 5V
  • WS2812 16-LED ringGND → GND
  • WS2812 16-LED ringDIN → D2
Built it? Check your wiring before you power up.Pick the pin each wire went to and we'll point out swapped pins, power mistakes and pins that clash.

Step-by-step build

0 of 7 done

Code

classroom_noise_meter.inoVerify & upload in Electrolark
// Classroom noise traffic light
// Geekobot project library · board: Arduino Nano
// Wiring diagram, parts list and build steps: Geekobot project page "classroom-noise-meter"

#include <Adafruit_NeoPixel.h>

// ---- pins ----
const uint8_t MIC_PIN = A0;
const uint8_t RING_PIN = 2;

const int ADC_MAX = 1023;      // 10-bit analog input
const float VREF = 5.0f;

const int RING_LEDS = 16;
Adafruit_NeoPixel ring(RING_LEDS, RING_PIN, NEO_GRB + NEO_KHZ800);

// ---- latest readings ----
int soundPct = 0;

const unsigned long READ_EVERY_MS = 100;
unsigned long lastRead = 0;

int readSoundLevel() {
  // peak-to-peak amplitude over a 50 ms window
  unsigned long start = millis();
  int lo = ADC_MAX, hi = 0;
  while (millis() - start < 50) {
    int v = analogRead(MIC_PIN);
    if (v < lo) lo = v;
    if (v > hi) hi = v;
  }
  return (int)((hi - lo) * 100L / ADC_MAX);
}

void showLevel(int pct, uint32_t color) {
  int lit = constrain(pct, 0, 100) * RING_LEDS / 100;
  for (int i = 0; i < RING_LEDS; i++) ring.setPixelColor(i, i < lit ? color : 0);
  ring.show();
}

uint32_t bandColor(int pct) {
  if (pct < 40) return ring.Color(0, 160, 60);      // green
  if (pct < 70) return ring.Color(200, 120, 0);     // amber
  return ring.Color(220, 0, 0);                    // red
}

void setup() {
  Serial.begin(115200);
  ring.begin();
  ring.setBrightness(40);
  ring.show();
}

void loop() {
  if (millis() - lastRead < READ_EVERY_MS) return;
  lastRead = millis();
  soundPct = readSoundLevel();
  int pct = constrain((int)(soundPct * 2), 0, 100);
  showLevel(pct, bandColor(pct));
  Serial.print(F("Sound="));
  Serial.print(soundPct);
  Serial.print(F("%"));
  Serial.println();
}

Run it: what this code does

The sketch above runs here on a simulated Arduino Nano. Move the sliders for the sensors and buttons it reads, and watch the Serial monitor, display and outputs change.

Troubleshooting

Level barely changes+

Turn the module trimmer to increase gain, or move the mic closer to the sound.

First LED wrong colour or flicker+

Add the 330 Ω resistor in series with DIN and share GND with the board.

Nothing happens after uploading+

Open the Serial Monitor at 115200 baud and check for messages. Make sure you chose the right board and port in the Arduino IDE.

Upload fails+

Close other programs using the serial port, try another USB cable (some are charge-only) and press reset just before uploading.

FAQ

Can I use an ESP32 instead of the Arduino?+

Yes. Most of the code works unchanged on an ESP32 with the ESP32 board package. Watch for 5 V modules: ESP32 pins are 3.3 V, so 5 V output signals need a resistor divider. Analog readings run 0–4095 instead of 0–1023, which the ADC_MAX constant handles.

How do I power it without a computer?+

Use a 5 V USB phone charger or a power bank into the board's USB port.

What parts do I need to build the classroom noise traffic light?+

6 parts: Nano CH340 Development Board (Soldered), Analog Sound Sensor Microphone Module, WS2812 RGB LED Ring (16 LEDs), Resistor Assortment Kit (30 Values), Solderless Breadboard (830 points) and Dupont Jumper Wires (40 pcs). Tools: Digital Multimeter and Wire Stripper and Cutter. On this page you can tick the parts you already have and add only the rest to your cart.

How hard is it and how long does it take?+

It is a beginner project and takes about 1 hour. The build on this page has 7 steps.

Do I need to write the code myself?+

No. This page has the complete, tested code (classroom_noise_meter.ino). Install this library first: Adafruit NeoPixel.

Can I see what the code does before I build it?+

Yes. The Run it panel under the code runs this exact sketch on a simulated board. Move the sliders or press the buttons for the sensors it reads, and the Serial monitor, display and outputs react as they will on the real build. It is a simulation, so real readings depend on your parts and wiring.

How much does the classroom noise traffic light cost to build?+

About ₹438 for the parts at the prices on this page, plus tools if you do not have them. Quantity price breaks lower the cost when you build several.

What will I learn from this project?+

Addressable LEDs and colour mixing; Sampling a waveform and measuring amplitude.

What can I build next with these parts?+

Ideas that reuse this build: Music-reactive LED strip. They are listed under Take it further on this page.

Take it further

  • Music-reactive LED strip

Related projects

  • UNORELAYDC
    Audio & sound
    Intermediate· 1 hour

    Double-clap light switch

    Clap twice and the lights come on. Clap twice again to switch them off.

    ₹699 · 7 partsArduino
  • NANO
    Audio & sound
    Beginner· 45 minutes

    Visitor door chime

    Plays a friendly ding-dong whenever someone walks into the shop or room.

    ₹328 · 5 partsArduino
  • UNO
    Audio & sound
    Beginner· 45 minutes

    Morse code beacon and key

    Beeps and flashes any message in Morse, or key your own by hand.

    ₹391 · 8 partsArduino
  • UNO
    Audio & sound
    Beginner· 45 minutes

    16-key mini piano

    Turn a membrane keypad into a two-octave piano.

    ₹385 · 6 partsArduino

Learning project. Check every circuit and the datasheet of each part before you power it up.

Run itChange the inputs and watch the output
WS2812 16-LED ring (D2)
Serial monitor115200 baud
Sound=9%
Sound=9%
Sound=10%
Sound=9%
Sound=9%
Sound=9%
Sound=9%
Sound=9%
Sound=9%

A simulation of the sketch above, so you know what to expect. Real readings vary with your parts and wiring.

Ask the Community

Ask a question Share your build