Same-day dispatch before 2 PM · Free delivery over ₹999 · GST invoices Get the appPrices incl. GST
Geekobot
Snap & SendNEWGeeko AIWhere's myOrder
Log in
Products
  • Projects
    • Component guidesHow parts work, with code you can run
    • Learning pathsFrom your first LED to your first robot
    • Workshops & eventsOnline sessions for makers and classes
    • ElectrolarkFree guided builds, simulator and certificates
    • Students & teachersStudent discount and classroom help
    • CommunityShare builds and ask other makers
    • CalculatorsOhm's law, LED resistor, 555 and 100+ more
    • Circuit builderWire parts and run the circuit, powered by Electrolark
    • Geeko AIAsk what to buy or how to wire it
    • Snap & SendPhotograph a part or list, we find it
    • Part finderAnswer a few questions, get the right part
    • Compatibility checkWill these two parts work together?
    • Compare partsSpecs side by side
    • Business & bulk ordersGST invoices, credit and volume prices
    • Request a quotationSend your list, get a quote
    • Classroom kitsPer-student kits and lab bundles
    • Gift cardsFor students, teams and events
  • Atal Tinkering Lab
BOM to cart
Geekobot

Components, kits and know-how for makers, students, engineers, labs and businesses across India.

Ask Geeko AIOrders, parts and projects, any timeEmail supportReply within 1 working dayGet the Geekobot appAdd it to your home screen, free

Follow us

Shop

  • Boards & SBCs
  • Sensors & Modules
  • IoT & Wireless
  • Drone & FPV
  • 3D Printing
  • Filaments & Resins
  • Motors & Drivers
  • Power & Batteries
  • Semiconductors
  • Passive
  • Displays & LEDs
  • Switches & Relays
  • Wires & Cables
  • Prototyping
  • Tools & Test
  • Robotics
  • STEM Kits
  • Atal Tinkering Lab
  • Mechanical Parts
  • Audio

Orders

  • Track your order
  • Help & support
  • Shipping and delivery
  • Refunds and cancellation
  • Contact us

Learn

  • Projects
  • Geeko AI project assistant
  • Learning paths
  • Guides
  • Calculators
  • Electrolark: free guided builds

Part tools

  • Part finder
  • Compare parts
  • Will it work with my board?

Institutions

  • Classroom kits
  • Atal Tinkering Lab
  • Students & teachers
  • Workshops & Events

Business

  • Business & education
  • Request a quotation
  • BOM bulk upload
  • Quick order by SKU

Company

  • About Geekobot
  • Community
  • Gift cards
  • Terms & conditions
  • Privacy policy
  • Product directory
  • Sitemap

© 2026 Geekobot, a trade name of OLatus Systems Private Limited. All rights reserved.

20, 1st Floor, Neeladri Complex, 10th Cross, Sampige Rd, 2nd Main, Malleshwaram, Bengaluru, Karnataka 560003 · GSTIN 29AACCO0462F1ZM

+91 91810 15607 · connect@geekobot.in · Monday to Saturday, 10 AM to 2 PM IST

UPI · CARDS · NETBANKING · GST INVOICES

ShopProjectsGeeko AIGuides
Compare 0 parts →
Log in

Shop by category

Shop all components
  • Boards & SBCs1,910 products
    • Alternative Single Board Computers
    • Arduino Ecosystem
    • FPGA & Logic Boards
    • Microcontroller & Wireless Boards
    View all
  • Sensors & Modules4,701 products
    • Biomedical & Heart Rate
    • Current, Voltage & Power
    • Force, Weight & Pressure
    • Gas, Weather & Environmental
    View all
  • IoT & Wireless2,314 products
    • RF Modules
    • RFID & NFC
    • Antennas & RF Accessories
    • Cameras & Smart Vision
    View all
  • Drone & FPV3,558 products
    • Flight Control & Navigation
    • FPV Video & Optics
    • Frames & Structural Parts
    • Motors & Propulsion
    View all
  • 3D Printing2,204 products
    • 3D Printers
    • 3D Scanners & Digitizers
    • Laser Engravers & Cutters
    • Material Management & Upgrades
    View all
  • Filaments & Resins1,472 products
    • Filaments
    • Photopolymer Resins
    View all
  • Motors & Drivers463 products
    • BLDC Motor Drivers
    • DC & Geared Motors
    • DC Motor Drivers
    • Linear Actuators & Solenoids
    View all
  • Power & Batteries557 products
    • Battery Holders & Connectors
    • Breadboard Power
    • Chargers & BMS
    • DC-DC Converters
    View all
  • Semiconductors295 products
    • Diodes & Rectifiers
    • Interface & RF Encoder ICs
    • Logic ICs (74xx)
    • Logic ICs (CD4000)
    View all
  • Passive67 products
    • Capacitors
    • Circuit Protection
    • Crystals & Oscillators
    • Inductors
    View all
  • Displays & LEDs572 products
    • 7-Segment & Dot Matrix
    • Addressable LEDs
    • Character LCDs
    • Graphic LCDs
    View all
  • Switches & Relays184 products
    • Keypads & Touch
    • Push Buttons & Tactile
    • Relay Modules
    • Relays
    View all
  • Wires & Cables233 products
    • Board-to-Wire Connectors
    • Crimp & Splice
    • Headers & Dupont
    • Heat Shrink & Sleeving
    View all
  • Prototyping101 products
    • Breadboards
    • Interface Modules
    • PCBs & Perfboards
    View all
  • Tools & Test717 products
    • Bench Power Supplies
    • Hand Tools
    • Measuring Tools
    • Meters & Testers
    View all
  • Robotics180 products
    • Humanoid & Legged Robots
    • Robot Chassis & Platforms
    • Robotic Arms & Grippers
    • Wheels & Casters
    View all
  • STEM Kits268 products
    • Arduino Learning Kits
    • Coding & IoT Kits
    • Early Coding (Ages 3-8)
    • Invention Kits
    View all
  • Atal Tinkering Lab196 products
    • Package 1: Electronics, Robotics, IoT and Sensors
    • Package 2: Rapid Prototyping Tools
    • Package 3: Mechanical, Electrical and Measurement Tools
    • Package 4: Power Supply, Accessories and Safety Equipment
    View all
  • Mechanical Parts212 products
    • Bearings
    • Brackets & Mounts
    • Couplers
    • Fasteners & Standoffs
    View all
  • Audio109 products
    • Amplifier Modules
    • Buzzers & Sirens
    • Speakers
    View all
  1. Home
  2. ›Projects
  3. ›Fuel level ring

Display & LED projects

Generator fuel level colour ring

A ring on the generator shows the fuel as red, amber or green, so you know before it runs dry.

By Geekobot Learning Team

Beginner
Difficulty
1 hour
Build time
₹583
Parts cost
6
Parts
Arduino
Platform
Add all parts · ₹583Start building
  • Energy & power
  • Home automation
  • Travel & tracking
NANO
Tap a part to see what it does
OverviewPartsWiringBuildCodeTroubleshootFAQIdeas

What you'll build

The waterproof JSN-SR04T looks down into a 30 cm tall tank from the lid. The ring fills as the fuel rises: red below 20 per cent, amber to 40 per cent, then green. It saves climbing up to open the cap every time.

What you'll learn

  • Addressable LEDs and colour mixing
  • Time-of-flight measurement with sound
Safety

Keep the electronics out of the fuel vapour area; mount the sensor in a sealed cap and the Nano in a separate box.

Petrol vapour is explosive. Use a diesel tank for this project.

  1. SenseJSN-SR04T waterproof sonar
  2. ThinkArduino Nano runs the sketch
  3. ActWS2812 16-LED ring

Parts list

Tick anything you already have and the total updates.

PartQtyPrice
  • NANO
    Nano CH340 Development Board (Soldered)
    GB-SBCD-0339Guide

    The brain of the project

    Works with the same pins and code as the original Arduino Nano.

    × 1₹185₹185
  • JSN-SR04T-2.0 Waterproof Ultrasonic Sensor with 2.5m Probe
    SENS-4236

    Waterproof ultrasonic probe on a 2.5 m cable.

    × 1₹249₹249
  • WS2812 RGB LED Ring (16 LEDs)
    GB-DISP-0016-02

    Sixteen individually addressable RGB LEDs on one data wire.

    × 1₹49₹49
  • Resistor Assortment Kit (30 Values)
    GB-PASV-0002Guide

    330 Ω in series with DIN

    × 1₹33₹33
  • Solderless Breadboard (830 points)
    GB-PROT-0001Guide

    Holds everything together without soldering

    × 1₹18₹18
  • Dupont Jumper Wires (40 pcs)
    GB-WIRE-0001Guide

    Connects the parts

    × 1₹49₹49

Complete kit

6 of 6 parts in one tap

₹583

GST included

3% off these parts while the whole kit stays in your cart

Parts you still need

₹583

6 of 6 parts. Tick anything you already have.

About ₹17,490 before bulk pricing for 30 kits.

Request bulk quote

Tools you'll need

  • Digital Multimeter
  • Wire Stripper and Cutter

Learn the parts

  • ESP32 vs Arduino Uno
  • I2C Explained
  • Arduino Uno

Calculators for this build

  • HC-SR04 ultrasonic distance calculator
  • Water tank level calculator (ultrasonic sensor to litres)
  • LED strip power calculator

Wiring

Follow the colours: red is power, dark grey is ground, blue is a signal.

PartPinConnect toNote
JSN-SR04T waterproof sonarVCC5V
JSN-SR04T waterproof sonarTRIGD2
JSN-SR04T waterproof sonarECHOD3
JSN-SR04T waterproof sonarGNDGND
WS2812 16-LED ring5V5V
WS2812 16-LED ringGNDGND
WS2812 16-LED ringDIND4
  • JSN-SR04T waterproof sonarVCC → 5V
  • JSN-SR04T waterproof sonarTRIG → D2
  • JSN-SR04T waterproof sonarECHO → D3
  • JSN-SR04T waterproof sonarGND → GND
  • WS2812 16-LED ring5V → 5V
  • WS2812 16-LED ringGND → GND
  • WS2812 16-LED ringDIN → D4
Built it? Check your wiring before you power up.Pick the pin each wire went to and we'll point out swapped pins, power mistakes and pins that clash.

Step-by-step build

0 of 8 done

Code

generator_fuel_level_ring.inoVerify & upload in Electrolark
// Generator fuel level colour ring
// Geekobot project library · board: Arduino Nano
// Wiring diagram, parts list and build steps: Geekobot project page "generator-fuel-level-ring"

#include <Adafruit_NeoPixel.h>

// ---- pins ----
const uint8_t TRIG_PIN = 2;
const uint8_t ECHO_PIN = 3;
const uint8_t RING_PIN = 4;

const int RING_LEDS = 16;
Adafruit_NeoPixel ring(RING_LEDS, RING_PIN, NEO_GRB + NEO_KHZ800);

// ---- latest readings ----
float distCm = 0;

const unsigned long READ_EVERY_MS = 200;
unsigned long lastRead = 0;

float readDistanceCm() {
  digitalWrite(TRIG_PIN, LOW);
  delayMicroseconds(2);
  digitalWrite(TRIG_PIN, HIGH);
  delayMicroseconds(10);
  digitalWrite(TRIG_PIN, LOW);
  unsigned long us = pulseIn(ECHO_PIN, HIGH, 30000UL);  // 30 ms timeout, about 5 m
  if (us == 0) return -1;                              // no echo
  return us * 0.0343f / 2.0f;
}

void showLevel(int pct, uint32_t color) {
  int lit = constrain(pct, 0, 100) * RING_LEDS / 100;
  for (int i = 0; i < RING_LEDS; i++) ring.setPixelColor(i, i < lit ? color : 0);
  ring.show();
}

uint32_t bandColor(int pct) {
  if (pct < 20) return ring.Color(220, 0, 0);       // red
  if (pct < 40) return ring.Color(200, 120, 0);     // amber
  return ring.Color(0, 160, 60);                   // green
}

void setup() {
  Serial.begin(115200);
  pinMode(TRIG_PIN, OUTPUT);
  pinMode(ECHO_PIN, INPUT);
  ring.begin();
  ring.setBrightness(40);
  ring.show();
}

void loop() {
  if (millis() - lastRead < READ_EVERY_MS) return;
  lastRead = millis();
  distCm = readDistanceCm();
  int pct = constrain((int)(constrain((int)((30 - distCm) * 4), 0, 100)), 0, 100);
  showLevel(pct, bandColor(pct));
  Serial.print(F("Distance="));
  Serial.print(distCm, 0);
  Serial.print(F("cm"));
  Serial.println();
}

Run it: what this code does

The sketch above runs here on a simulated Arduino Nano. Move the sliders for the sensors and buttons it reads, and watch the Serial monitor, display and outputs change.

Troubleshooting

Distance always reads -1 or 0+

TRIG and ECHO are swapped, or the sensor has no 5 V. Swap the two signal wires and check VCC.

Readings jump around+

Average several readings and keep wires short. Two HC-SR04s pinging at once will confuse each other.

First LED wrong colour or flicker+

Add the 330 Ω resistor in series with DIN and share GND with the board.

Nothing happens after uploading+

Open the Serial Monitor at 115200 baud and check for messages. Make sure you chose the right board and port in the Arduino IDE.

Upload fails+

Close other programs using the serial port, try another USB cable (some are charge-only) and press reset just before uploading.

FAQ

Can I use an ESP32 instead of the Arduino?+

Yes. Most of the code works unchanged on an ESP32 with the ESP32 board package. Watch for 5 V modules: ESP32 pins are 3.3 V, so 5 V output signals need a resistor divider.

How do I power it without a computer?+

Use a 5 V USB phone charger or a power bank into the board's USB port.

What parts do I need to build the generator fuel level colour ring?+

6 parts: Nano CH340 Development Board (Soldered), JSN-SR04T-2.0 Waterproof Ultrasonic Sensor with 2.5m Probe, WS2812 RGB LED Ring (16 LEDs), Resistor Assortment Kit (30 Values), Solderless Breadboard (830 points) and Dupont Jumper Wires (40 pcs). Tools: Digital Multimeter and Wire Stripper and Cutter. On this page you can tick the parts you already have and add only the rest to your cart.

How hard is it and how long does it take?+

It is a beginner project and takes about 1 hour. The build on this page has 8 steps.

Do I need to write the code myself?+

No. This page has the complete, tested code (generator_fuel_level_ring.ino). Install this library first: Adafruit NeoPixel.

Can I see what the code does before I build it?+

Yes. The Run it panel under the code runs this exact sketch on a simulated board. Move the sliders or press the buttons for the sensors it reads, and the Serial monitor, display and outputs react as they will on the real build. It is a simulation, so real readings depend on your parts and wiring.

How much does the generator fuel level colour ring cost to build?+

About ₹583 for the parts at the prices on this page, plus tools if you do not have them. Quantity price breaks lower the cost when you build several.

What will I learn from this project?+

Addressable LEDs and colour mixing; Time-of-flight measurement with sound.

Is it safe to build?+

Keep the electronics out of the fuel vapour area; mount the sensor in a sealed cap and the Nano in a separate box. Petrol vapour is explosive. Use a diesel tank for this project.

What can I build next with these parts?+

Ideas that reuse this build: Rainwater harvest tank ring and Tap flow ring. They are listed under Take it further on this page.

Take it further

  • Rainwater harvest tank ring
  • Tap flow ring

Related projects

  • NANO
    Display & LED
    Beginner· 1 hour

    Remote-controlled RGB mood light

    Warm, cool, rainbow or breathing: cycle lighting moods from your sofa.

    ₹375 · 6 partsArduino
  • UNO
    Display & LED
    Beginner· 1 hour

    Electronic dice on an LED matrix

    Press to roll: the pips tumble and slow down before landing on a number.

    ₹413 · 6 partsArduino
  • NANO12:30
    Display & LED
    Beginner· 1 hour

    Reaction timer game

    Wait for the light, hit the button: how many milliseconds can you beat?

    ₹362 · 7 partsArduino
  • NANO12:30
    Display & LED
    Beginner· 1 hour

    Digital clock with real-time clock

    A bright 4-digit clock that keeps time through power cuts.

    ₹432 · 5 partsArduino

Learning project. Check every circuit and the datasheet of each part before you power it up.

Run itChange the inputs and watch the output
WS2812 16-LED ring (D4)
JSN-SR04T waterproof sonar TRIG (D2) OFF
Serial monitor115200 baud
Distance=60cm
Distance=60cm
Distance=60cm
Distance=60cm
Distance=60cm
Distance=60cm
Distance=60cm
Distance=60cm
Distance=60cm

A simulation of the sketch above, so you know what to expect. Real readings vary with your parts and wiring.

Ask the Community

Ask a question Share your build