GPS speedometer and clock
A bike or car speedometer that needs no wheel sensor: satellites do the measuring.
Shop by category
Shop all componentsFour 50 kg load cells under the cylinder and an ESP32-C3. The page shows the gas left after subtracting the tare weight stamped on the collar, with "Book refill" below 2 kg.
Tick anything you already have and the total updates.
Four half-bridge cells under the platform corners share the load, so the scale reads up to 200 kg; Subtracts the empty cylinder weight so the display shows the gas that is left.
Follow the colours: red is power, dark grey is ground, blue is a signal.
wifi_lpg_cylinder_monitor.inoVerify & upload in Electrolark// Wi-Fi LPG cylinder gas monitor
// Geekobot project library · board: ESP32-C3 SuperMini
// Wiring diagram, parts list and build steps: Geekobot project page "wifi-lpg-cylinder-monitor"
#include <HX711.h>
#include <WiFi.h>
#include <WebServer.h>
// ---- pins ----
const uint8_t HX_DT = 10;
const uint8_t HX_SCK = 7;
HX711 scale;
const float CALIBRATION = 420.0; // raw units per gram: calibrate with a known weight
const float EMPTY_CYLINDER_G = 15300; // tare weight (TW) stamped on the cylinder collar, in grams
// ---- latest readings ----
float grams = 0;
float gasKg = 0;
const char* WIFI_SSID = "YOUR_WIFI_NAME"; // 2.4 GHz network
const char* WIFI_PASS = "YOUR_WIFI_PASSWORD";
WebServer server(80);
const unsigned long READ_EVERY_MS = 2000;
unsigned long lastRead = 0;
const char* statusText = "Starting";
bool alertOn = false;
const float ALERT_LEVEL = 2.0; // adjust to suit
const float HYSTERESIS = 0.5;
const char PAGE[] PROGMEM = R"HTML(<!doctype html><html><head><meta name="viewport" content="width=device-width,initial-scale=1"><title>LPG</title>
<style>body{font-family:system-ui,sans-serif;background:#0d093d;color:#fff;margin:0;padding:20px}h1{font-size:20px;margin:0 0 14px}
.g{display:grid;grid-template-columns:repeat(auto-fit,minmax(140px,1fr));gap:12px}.c{background:#1c1866;border-radius:14px;padding:14px}
.l{font-size:12px;opacity:.7}.v{font-size:28px;font-weight:700;margin-top:4px}button{margin-top:14px;padding:12px 18px;border:0;border-radius:10px;font-size:16px;background:#a9c5ea;color:#0d093d}
.s{margin-top:12px;font-size:13px;opacity:.8}</style></head><body><h1>LPG</h1><div class="g" id="g"></div><p class="s" id="s">Connecting…</p>
<script>const F=[["gasKg","Gas left","kg"]];
async function tick(){try{const d=await(await fetch('/data')).json();document.getElementById('g').innerHTML=F.map(f=>'<div class="c"><div class="l">'+f[1]+'</div><div class="v">'+(typeof d[f[0]]==='boolean'?(d[f[0]]?'YES':'no'):d[f[0]])+' '+f[2]+'</div></div>').join('');
document.getElementById('s').textContent='Status: '+d.status+' · updated '+new Date().toLocaleTimeString();}catch(e){document.getElementById('s').textContent='Lost connection, retrying…'}}
setInterval(tick,2000);tick();</script></body></html>)HTML";
void handleData() {
String j = "{";
j += "\"gasKg\":"; j += String(gasKg, 1); j += ",";
j += "\"status\":\""; j += statusText; j += "\"}";
server.send(200, "application/json", j);
}
void handleRoot() { server.send(200, "text/html", PAGE); }
void evaluate() {
if (!alertOn && gasKg < ALERT_LEVEL) alertOn = true;
else if (alertOn && gasKg > ALERT_LEVEL + HYSTERESIS) alertOn = false;
statusText = alertOn ? "Book refill" : "Gas OK";
}
void setup() {
Serial.begin(115200);
scale.begin(HX_DT, HX_SCK);
scale.set_scale(CALIBRATION);
scale.tare(); // empty platform = 0 g
WiFi.mode(WIFI_STA);
WiFi.begin(WIFI_SSID, WIFI_PASS);
Serial.print(F("Connecting to Wi-Fi"));
for (int i = 0; i < 40 && WiFi.status() != WL_CONNECTED; i++) { delay(500); Serial.print("."); }
Serial.println();
Serial.print(F("Open this address in your browser: http://"));
Serial.println(WiFi.localIP());
server.on("/", handleRoot);
server.on("/data", handleData);
server.begin();
}
void loop() {
server.handleClient();
if (millis() - lastRead >= READ_EVERY_MS) {
lastRead = millis();
grams = scale.get_units(5);
gasKg = (grams - EMPTY_CYLINDER_G) / 1000.0f;
evaluate();
Serial.print(F("Gas left="));
Serial.print(gasKg, 1);
Serial.print(F("kg"));
Serial.println();
}
}
The sketch above runs here on a simulated ESP32-C3. Move the sliders for the sensors and buttons it reads, and watch the Serial monitor, display and outputs change.
Let it warm up for a minute and avoid touching the wires; re-tare after warm-up.
Place a known weight and adjust CALIBRATION until the reading matches.
Open the Serial Monitor at 115200 baud and check for messages. Make sure you chose the right board and port in the Arduino IDE.
Close other programs using the serial port, try another USB cable (some are charge-only) and press reset just before uploading.
Not directly; the board serves the page on your local network only. For remote access, send the readings to a cloud service such as MQTT, ThingSpeak or Blynk, or use a VPN into your home network.
No. ESP32-C3 and ESP8266 boards support 2.4 GHz networks only. Most routers broadcast both, so choose the 2.4 GHz name.
4 parts: ESP32-C3 SuperMini Development Board, HX711 with 4 × 50 kg Half-Bridge Load Cells and Combinator Board, Solderless Breadboard (830 points) and Dupont Jumper Wires (40 pcs). Tools: Digital Multimeter and Wire Stripper and Cutter. On this page you can tick the parts you already have and add only the rest to your cart.
It is a advanced project and takes about 3 hours. The build on this page has 7 steps.
No. This page has the complete, tested code (wifi_lpg_cylinder_monitor.ino). Install this library first: HX711.
Yes. The Run it panel under the code runs this exact sketch on a simulated board. Move the sliders or press the buttons for the sensors it reads, and the Serial monitor, display and outputs react as they will on the real build. It is a simulation, so real readings depend on your parts and wiring.
About ₹375 for the parts at the prices on this page, plus tools if you do not have them. Quantity price breaks lower the cost when you build several.
Strain gauges, amplifiers and calibration factors; Tare weight and net weight.
Ideas that reuse this build: Offline version with an LCD. They are listed under Take it further on this page.
A bike or car speedometer that needs no wheel sensor: satellites do the measuring.
Records where you went every five seconds, ready to open on a map.
Two boards, two radios: press the button at the gate and it rings indoors.
Check temperature, humidity and pressure from any phone on your Wi-Fi.
Learning project. Check every circuit and the datasheet of each part before you power it up.
Connecting to Wi-Fi... Open this address in your browser: http://192.168.1.50 Gas left=-14.8kg
A simulation of the sketch above, so you know what to expect. Real readings vary with your parts and wiring.