Shop by category
Shop all componentsTiming, filters & signals
Wheeler’s formula is accurate to about 1% for single-layer coils whose length is at least 0.8 of their radius.
L (µH) = n² × r² ÷ (9 × r + 10 × l), r and l in inchesn = √(L × (9r + 10l)) ÷ r20 turns on a 10 mm diameter former, 20 mm long: r = 0.197 in, l = 0.787 in, L = 400 × 0.0388 ÷ 9.65 = 1.61 µH. The wire is 0.63 m long, and close winding allows wire up to 1 mm thick.
A coil’s inductance rises with the square of the number of turns and with its diameter, and falls as it gets longer. Wheeler’s approximation is the classic formula that radio hobbyists use for single-layer coils.
Air-core inductors do not saturate and are used in RF tuned circuits, metal detectors and wireless charging experiments. After winding, check the real value with an LCR meter or by resonating it with a known capacitor.
Wheeler's formula: L (µH) = n² × r² ÷ (9r + 10l), with r and l in inches.
n = √(L × (9r + 10l)) ÷ r. The calculator solves it for your target inductance.
Within about 1 % for single-layer coils longer than about 0.8 times their radius.
20 turns on a 10 mm diameter former, 20 mm long: r = 0.197 in, l = 0.787 in, L = 400 × 0.0388 ÷ 9.65 = 1.61 µH. The wire is 0.63 m long, and close winding allows wire up to 1 mm thick.
Results are estimates for design and learning. Check critical designs against the component datasheet. Made by the Geekobot Learning Team. How we write our calculators