Shop by category
Shop all components
Radio Receivers (ELRS, Crossfire, PWM) · RadioMaster
The RadioMaster RP1 V2 is a compact 2.4GHz ExpressLRS Nano Receiver designed for low-latency, long-range control in FPV drones and RC models, featuring a CRSF interface and compatibility with all 2.4GHz ExpressLRS transmitters.
📖Guide for this partExpressLRS Serial Receivers→Buy 10 or more to pay ₹2,503.25 each
Business and institution accounts get extra tier pricing. Sign in for 100+ pieces.
Overview
The RadioMaster RP1 V2 Nano Receiver leverages the SEMTECH SX1281 RF chip and an ESP8285 MCU to provide robust 2.4GHz ExpressLRS connectivity. Its upgraded PCB design enhances thermal management and solder pad accessibility, while the rigid T-antenna improves durability and signal reception. This receiver is pre-loaded with ExpressLRS v2.4 firmware, ready for binding and configuration via the ExpressLRS Configurator.
Engineered for reliability, the RP1 V2 supports a wide refresh rate range from 25Hz to 500Hz (Full Duplex 1000Hz), allowing pilots to balance range and responsiveness. Its 10mW telemetry output ensures two-way communication is maintained, providing critical flight data back to the transmitter. The integrated status LED simplifies setup and troubleshooting during installation.
Good for
Category
Radio Receivers (ELRS, Crossfire, PWM)SKU
GB-DRFC-3314
| Brand / part no. | RadioMaster |
|---|---|
| MCU | ESP8285 |
| Antenna | 65mm UFL 2.4GHz T Antenna |
| RF Chip | SEMTECH SX1281 |
| Category | Radio Receivers (ELRS, Crossfire, PWM) |
| Firmware | ExpressLRS v2.4 (Pre-installed) |
| Protocol | ExpressLRS |
| Frequency | 2.4 GHz |
| Interface | CRSF |
| Item Type | Receiver |
| Refresh Rate | 500Hz / F1000Hz (Max), 25Hz (Min) |
| Operating Voltage | 5V |
| Telemetry RF Power | 10mW |
| Weight (with antenna) | 2.2 g |
| Dimensions (L x W x H) | 13 mm x 11 mm x 3 mm |
Typical values from the manufacturer's datasheet. Confirm the exact variant before you build a product around it.
Step-by-step builds that use parts from Radio Receivers (ELRS, Crossfire, PWM).
MCU: ESP8285; Antenna: 65mm UFL 2.4GHz T Antenna; RF Chip: SEMTECH SX1281; Category: Radio Receivers (ELRS, Crossfire, PWM); Firmware: ExpressLRS v2.4 (Pre-installed); Protocol: ExpressLRS. The full list is under Specifications.
Yes. Prices include GST and every order comes with a GST invoice. Add your GSTIN at checkout and we put it on the invoice for input credit.
Delivery is a flat ₹80 anywhere in India, and free on orders over ₹999. We ship from our Bengaluru and Guwahati warehouses, whichever is nearer to you, and the product page shows an estimated delivery date for your PIN code.
Yes, on eligible PIN codes for orders up to ₹5,000. A ₹150 COD charge is added at checkout, and checkout shows whether COD is available for your order. You can also pay by UPI, card or net banking.
Yes, if it arrives damaged, defective or is not what you ordered: tell us within 7 days of delivery and we collect it free and send a replacement or a full refund. We do not take back parts that are not faulty, so check the specs or ask us before you order. You can cancel for free until the order is dispatched.
Yes. The price per unit drops automatically at higher quantities, as shown in the price tiers above. For 100+ pieces or a purchase order, ask for a bulk quote.
Check the specifications for voltage and interface, or ask Geeko AI. It can suggest compatible boards and wiring.
Guides for this part and its category.
No reviews yet. Bought or built with this? Be the first to review it.