Shop by category
Shop all componentsWe picked projects that reuse the same board and the same first sketch, so after the first project every other one is a small change. They are in the order of difficulty: live video, then motion and microSD, then cameras for a specific job where the position, light and power matter most.
A tiny camera board that streams live video to any browser on your Wi-Fi.
Start here: live video streamed to a browser on your Wi-Fi. It checks your board, your power supply and your network in one go.
Parts, wiring and code →A trail camera for the garden or the front door: every movement gets a photo.
Save a photo to the microSD card when something moves. You learn to combine a PIR sensor, the camera and file storage.
Parts, wiring and code →Watch a long print from your phone and stop it if it fails.
Watch your 3D print from another room. A popular use that needs only the live-video sketch and a good mount.
Parts, wiring and code →Check on the fish from work, or watch a new tank cycle, from your phone.
A live view of a fish tank. Teaches how to place a camera against glass and avoid reflections.
Parts, wiring and code →See which birds visit the feeder and when, with a photo each time one lands.
Photograph visitors to a bird feeder. Introduces outdoor placement, weather protection and motion triggering.
Parts, wiring and code →Watch sparrows or other small birds raise their young, with a photo at each feeding visit.
A camera inside a nest box. Shows how to handle a dark space and a short cable run.
Parts, wiring and code →Find out who eats the cat's food: a photo each time something visits the bowl.
See when your pet eats. A simple indoor camera with a motion trigger and saved photos.
Parts, wiring and code →Takes a photo each time someone comes to the door, so you can see who left a parcel and when.
Photograph deliveries at your door. Teaches placement, field of view and keeping power stable all day.
Parts, wiring and code →Shows who left the post or the delivery, and when.
Know when post arrives. A small enclosure project with a trigger and a battery-friendly schedule.
Parts, wiring and code →A photo of every car or person that comes to the gate, saved with a number.
Watch a garage or gate. Combines a wider view, night-time lighting and notifications.
Parts, wiring and code →Live video over Wi-Fi, motion-triggered photos saved to a microSD card, a 3D printer monitor, a bird or pet camera and a doorstep or gate camera. All use the same board and a similar sketch.
Use the Arduino IDE with the ESP32 board package. Most boards need a USB-to-serial adapter or a programming base and a jumper from GPIO 0 to ground during upload. Each project page lists the exact steps.
Usually the power supply: the camera and Wi-Fi draw current peaks that a weak USB cable or port cannot supply, which causes brown-out resets. Use a good 5 V supply of at least 500 mA and a short thick cable.
It can stream video live and save still photos to microSD easily. Recording long video is limited by speed and memory, so the projects here focus on live view and snapshots.
It is a good learning and hobby camera for a porch, gate or shed, but it is not a certified security product. Keep the stream on your own network and change the default settings.
Each project page has a parts list with Geekobot products you can add to your cart together, including the ESP32-CAM board, a programmer and a microSD card.