Shop by category
Shop all componentsWe picked projects with one sensor each, no mains wiring and parts that cost a few hundred rupees, in the order that adds one new idea at a time: a digital input, an I2C sensor, an analog sensor, sound, distance and finally a camera.
See on your phone whenever someone touches a pad, useful for quizzes, reception bells and toys.
The smallest possible Wi-Fi project: one touch pad, one board, and a web page that shows when it is touched. Perfect for checking your board and Wi-Fi setup.
Parts, wiring and code →Shows on your phone if the front door has been opened, and keeps the alert until you clear it.
A reed switch and a magnet tell your phone when a door opens. You learn pull-up resistors and how the ESP32 keeps a state until you clear it.
Parts, wiring and code →Check temperature, humidity and pressure from any phone on your Wi-Fi.
Temperature, humidity and air pressure on a phone dashboard. Your first I2C sensor, and the classic ESP32 project for a reason.
Parts, wiring and code →See whether your plant needs water from your phone, even when you are away.
A capacitive soil sensor reports whether your plant needs water. Teaches calibrating an analog reading with map().
Parts, wiring and code →Shows whether a room is in use from any browser on your network.
A PIR sensor shows whether a room is in use. Simple digital input, very useful in hostels, offices and labs.
Parts, wiring and code →See how noisy a room or street is from your browser.
A microphone module measures how loud a room is. You learn to sample a changing signal instead of reading it once.
Parts, wiring and code →Office and hostel bins report how full they are to one page.
An HC-SR04 ultrasonic sensor in the lid reports how full a bin is: a popular smart-city project idea.
Parts, wiring and code →Check how much water is in the overhead tank without climbing up.
The same idea with a waterproof sensor for the overhead tank, so you never climb up to check the water level.
Parts, wiring and code →A gas alarm that also shows the live level on your phone.
An MQ-2 gas sensor with a buzzer and a live level on your phone. Teaches sensor warm-up and alarm thresholds (a learning project, not a certified alarm).
Parts, wiring and code →A tiny camera board that streams live video to any browser on your Wi-Fi.
Finish with live video: the ESP32-CAM streams its camera to any browser on your Wi-Fi.
Parts, wiring and code →Yes. It is programmed in the same Arduino IDE with the same kind of code as an Arduino Uno, and it adds Wi-Fi and Bluetooth on the board. Start with a one-sensor project like the touch pad or door alert, then move to the weather station.
Most projects here use the ESP32-C3 SuperMini because it is small, cheap and fits a breadboard. A 38-pin ESP32-WROOM DevKit works for the same projects with different pin numbers, and has more pins for bigger builds. The ESP32-CAM is a separate board you only need for camera projects.
No. Each project runs a small web server on the ESP32 itself. You open its address in the browser of any phone or laptop on the same Wi-Fi, so there is no app to install and no account to create.
If you want Wi-Fi or a phone dashboard, start with the ESP32. If you want the simplest possible first circuits and the most tutorials, start with an Arduino Uno. Our ESP32 vs Arduino guide compares them in detail.
About ₹350 to ₹850 in parts each, including the board. The ESP32-C3 board, breadboard and jumper wires are shared, so building several projects costs much less than adding the totals.
The ESP32 only uses 2.4 GHz Wi-Fi, so a 5 GHz-only network will not work. Check the network name and password in the code (they are case-sensitive), and power the board from a good USB cable, because weak power causes resets when the radio starts.