Shop by category
Shop all componentsWe ordered them from robots that react to one simple signal (a clap, a torch, a TV remote) to robots that sense their surroundings and finish with a robot arm. Every project page has the full parts list, wiring table, tested code and fixes for wheels that spin the wrong way.
Clap once to go, again to spin, again to stop.
Clap once to go, again to spin, again to stop. A fun first robot that teaches how a sound sensor and a motor driver work together.
Parts, wiring and code →Shine a torch and the robot follows it like a moth, turning towards the brighter side.
Shine a torch and the robot follows it like a moth. Shows how two sensors let a robot steer.
Parts, wiring and code →Drive a robot car with any old TV or set-top-box remote: hold an arrow to move, let go to stop.
Drive the robot with an old TV remote. Students learn how infrared remotes send codes.
Parts, wiring and code →Tape a sketch pen to the back and it draws a growing spiral across chart paper.
Tape a sketch pen to it and it draws a growing spiral on chart paper. Great for connecting robots with maths.
Parts, wiring and code →Hold your hand in front of it and the car follows like a pet; pull back and it reverses.
An ultrasonic sensor keeps the car a set distance from your hand, so it follows you like a pet.
Parts, wiring and code →A small robot that follows a black line on white paper using IR modules and an L293D.
The classic school robot: IR sensors follow a black line on white paper. Uses the parts found in Atal Tinkering Lab kits.
Parts, wiring and code →A robot that drives, spots a wall with its ultrasonic eyes and turns away.
Drives around and turns away when its ultrasonic eyes see a wall. The most popular robot at science exhibitions.
Parts, wiring and code →A robot that drives around a table without falling off.
Drives around a table without falling off, using downward-facing IR sensors.
Parts, wiring and code →Drive your robot from a phone app over Bluetooth.
Drive the robot from a phone app over Bluetooth with an HC-05 module.
Parts, wiring and code →Four knobs, four servos: pick things up with a desktop robot arm.
Finish with a four-servo robot arm that picks things up, controlled by four knobs.
Parts, wiring and code →A clap-controlled or light-seeking robot. Each needs only a board, a motor driver, a two-wheel chassis and one sensor, and the code is short. After that, a line follower or obstacle-avoiding robot is the natural next step.
Roughly class 6 to class 10. Younger students can build the first few with help from a teacher or parent; the Bluetooth car and robot arm suit class 8 and above.
An Arduino Uno (a clone is fine), a motor driver such as the L298N or L293D, a two-wheel robot chassis with motors, a battery pack, a breadboard and jumper wires, plus one sensor for the robot you are building. Each project page lists the exact parts.
About ₹600 to ₹1,250 for each robot including the board and chassis. The board, chassis and motor driver can be reused for the next robot, so each new robot usually costs only the price of its sensor.
Yes. The obstacle-avoiding robot, line follower and Bluetooth car are crowd favourites. Prepare a simple chart that explains the sensor, the decision the robot makes and the motor action, and keep spare batteries ready.
No. Every project comes with complete, tested code. Students can upload it as it is, then change one value at a time, such as speed or turning time, to see what happens.