Shop by category
Shop all componentsWe picked projects that cover the topics engineering courses teach (serial buses like SPI and I2C, PWM, motor drivers, real-time clocks, control loops and power measurement) and that you can demonstrate working on a table in a viva.
Tap a card to sign in: the date, time and card number go into a spreadsheet file.
Tap an RFID card and the date, time and card number are saved to a spreadsheet file on microSD. Covers SPI, a real-time clock and data logging.
Parts, wiring and code →Touch a registered finger and the lock clicks open; strangers get three angry beeps.
A registered finger opens the lock and strangers get a warning beep. A popular biometric security project with a relay output.
Parts, wiring and code →Turns a small solar panel to follow the sun from east to west through the day.
Two light sensors and a servo turn a small solar panel to follow the sun. A clear example of closed-loop control.
Parts, wiring and code →Rest a finger on the sensor and watch your pulse appear in beats per minute.
A MAX30102 sensor shows your pulse in beats per minute on an OLED. Good for biomedical topics (a learning build, not a medical device).
Parts, wiring and code →Beeps and lights up when a vehicle, cart or grazing animal moves more than 200 m from home.
A GPS module raises an alarm when a vehicle or animal moves more than 200 m from home. Teaches reading NMEA data and distance maths.
Parts, wiring and code →Stands on two wheels like a Segway by driving under itself whenever it starts to tip.
Balances on two wheels using an MPU6050 and a motor driver. The classic PID control project and a crowd-pleaser in demos.
Parts, wiring and code →Four knobs, four servos: pick things up with a desktop robot arm.
A four-axis robot arm driven by four knobs. Shows multi-servo control and mapping analog inputs to angles.
Parts, wiring and code →Shows volts and watts, and adds up the watt-hours and mAh a battery, solar panel or DC load has delivered.
Measures volts, amps, watts and watt-hours with an INA219. Useful for any power, battery or solar project.
Parts, wiring and code →Waters in the cool morning and evening only when the soil is actually dry, with a time limit for safety.
Waters only in the morning and evening, and only when the soil is dry, with a safety time limit. Combines an RTC, a sensor and a relay.
Parts, wiring and code →Turns a 12 V LED lamp on at dusk, but only while the battery has enough charge left.
Switches a 12 V LED lamp at dusk, but only while the battery has enough charge. A compact renewable energy project.
Parts, wiring and code →Choose a project that uses at least one sensor, one output and some decision logic, and that you can extend. RFID attendance, a solar tracker, a self-balancing robot and smart irrigation are all good choices because they show clear engineering concepts and give measurable results.
Most work as mini projects as they are. For a major project, take one as the base and add more: a second sensor, a cloud dashboard with an ESP32, a custom PCB, an enclosure, or a study of accuracy and power use.
Yes. Every project here is written and tested for clone Uno and Nano boards with the CH340 USB chip. Install the CH340 driver once on your computer and they work like the original boards.
Between about ₹550 and ₹2,000 per project including the board. The board, breadboard, jumper wires and common modules can be reused between projects.
Yes. Each project page has the complete code, a wiring table that lists every connection pin by pin, step-by-step build instructions and a troubleshooting section.
Include the problem statement, block diagram, component list, wiring, the working principle of each sensor, the code logic as a flowchart, your test readings, problems you solved and possible improvements. The project page gives you most of the technical details for each section.