Shop by category
Shop all componentsWe picked experiments that need no soldering and no mains power, take an hour or less to set up, and use everyday materials (a lemon, a cup of tea, a jar of water, pots of soil) alongside the sensor.
Stick a zinc nail and a copper strip into a lemon and measure the volts.
Push a zinc nail and a copper strip into a lemon and read its voltage on a display. Then try other fruits or connect lemons in series.
Parts, wiring and code →Pour the same water into sand, loam and clay and compare the readings.
Pour the same water into sand, loam and clay and compare how much each one holds. Links science with farming.
Parts, wiring and code →Watch a hot cup cool on a live display and test whether a lid or a sleeve really helps.
Watch a hot drink cool on a live display and test whether a lid or a sleeve really slows it down.
Parts, wiring and code →Wrap identical jars in foil, wool and foam and let the logger rank them overnight.
Wrap jars in foil, wool and foam and let a logger rank the best insulator overnight. A perfect fair-test project.
Parts, wiring and code →Hang a stone from the scale in air and then in water, and measure the upward push.
Weigh a stone in air and in water with a digital scale to measure the upward push: Archimedes' principle with real numbers.
Parts, wiring and code →A magnet on a swinging pendulum triggers a Hall sensor each pass; measure the period.
A magnet and a Hall sensor time each swing. Change the string length and see how the period changes.
Parts, wiring and code →Measure the distance to a wall and then work out the speed of sound.
Measure the distance to a wall with an ultrasonic sensor, then work out the speed of sound yourself.
Parts, wiring and code →Compare a clear box in the sun with an open one.
Compare the temperature in a closed clear box and an open one in the sun to model the greenhouse effect.
Parts, wiring and code →Tilt a small solar panel and read its angle and power together to find the best position.
Tilt a small solar panel and read its angle and power together to find the best position.
Parts, wiring and code →Compare how fast two pots dry in different light.
Compare how fast two plant pots dry in different light, with a colour ring that shows the moisture.
Parts, wiring and code →One that measures something and answers a question, such as which material insulates best, how a pendulum's length changes its swing, or how much voltage a lemon makes. A sensor and a display turn a simple model into a real experiment with results you can explain.
Yes. They all run on low-voltage USB power, need no soldering and no mains wiring. Hot drinks and sunlight experiments need normal care, and fruit used in the fruit battery should not be eaten.
No. Each project page has the complete, tested code to upload as it is, plus simple steps to set up the experiment and record the readings.
From about ₹340 to ₹1,450 including the board and sensor. The board and display can be reused for other experiments.
State the question, explain the fair test (what you changed, what you kept the same), show a table and a graph of your readings, and finish with what you found and why. Let visitors try the experiment themselves.
A clone Arduino Uno or Nano with a USB cable. Both are low-cost and work the same way for these experiments.