Same-day dispatch before 2 PM · Free delivery over ₹999 · GST invoices Get the appPrices incl. GST
Geekobot
Snap & SendNEWGeeko AIWhere's myOrder
Log in
Products
  • Projects
    • Component guidesHow parts work, with code you can run
    • Learning pathsFrom your first LED to your first robot
    • Workshops & eventsOnline sessions for makers and classes
    • ElectrolarkFree guided builds, simulator and certificates
    • Students & teachersStudent discount and classroom help
    • CommunityShare builds and ask other makers
    • CalculatorsOhm's law, LED resistor, 555 and 100+ more
    • Circuit builderWire parts and run the circuit, powered by Electrolark
    • Geeko AIAsk what to buy or how to wire it
    • Snap & SendPhotograph a part or list, we find it
    • Part finderAnswer a few questions, get the right part
    • Compatibility checkWill these two parts work together?
    • Compare partsSpecs side by side
    • Business & bulk ordersGST invoices, credit and volume prices
    • Request a quotationSend your list, get a quote
    • Classroom kitsPer-student kits and lab bundles
    • Gift cardsFor students, teams and events
  • Atal Tinkering Lab
BOM to cart
Geekobot

Components, kits and know-how for makers, students, engineers, labs and businesses across India.

Ask Geeko AIOrders, parts and projects, any timeEmail supportReply within 1 working dayGet the Geekobot appAdd it to your home screen, free

Follow us

Shop

  • Boards & SBCs
  • Sensors & Modules
  • IoT & Wireless
  • Drone & FPV
  • 3D Printing
  • Filaments & Resins
  • Motors & Drivers
  • Power & Batteries
  • Semiconductors
  • Passive
  • Displays & LEDs
  • Switches & Relays
  • Wires & Cables
  • Prototyping
  • Tools & Test
  • Robotics
  • STEM Kits
  • Atal Tinkering Lab
  • Mechanical Parts
  • Audio

Orders

  • Track your order
  • Help & support
  • Shipping and delivery
  • Refunds and cancellation
  • Contact us

Learn

  • Projects
  • Geeko AI project assistant
  • Learning paths
  • Guides
  • Calculators
  • Electrolark: free guided builds

Part tools

  • Part finder
  • Compare parts
  • Will it work with my board?

Institutions

  • Classroom kits
  • Atal Tinkering Lab
  • Students & teachers
  • Workshops & Events

Business

  • Business & education
  • Request a quotation
  • BOM bulk upload
  • Quick order by SKU

Company

  • About Geekobot
  • Community
  • Gift cards
  • Terms & conditions
  • Privacy policy
  • Product directory
  • Sitemap

© 2026 Geekobot, a trade name of OLatus Systems Private Limited. All rights reserved.

20, 1st Floor, Neeladri Complex, 10th Cross, Sampige Rd, 2nd Main, Malleshwaram, Bengaluru, Karnataka 560003 · GSTIN 29AACCO0462F1ZM

+91 91810 15607 · connect@geekobot.in · Monday to Saturday, 10 AM to 2 PM IST

UPI · CARDS · NETBANKING · GST INVOICES

ShopProjectsGeeko AIGuides
Compare 0 parts →
Log in

Shop by category

Shop all components
  • Boards & SBCs1,910 products
    • Alternative Single Board Computers
    • Arduino Ecosystem
    • FPGA & Logic Boards
    • Microcontroller & Wireless Boards
    View all
  • Sensors & Modules4,701 products
    • Biomedical & Heart Rate
    • Current, Voltage & Power
    • Force, Weight & Pressure
    • Gas, Weather & Environmental
    View all
  • IoT & Wireless2,314 products
    • RF Modules
    • RFID & NFC
    • Antennas & RF Accessories
    • Cameras & Smart Vision
    View all
  • Drone & FPV3,558 products
    • Flight Control & Navigation
    • FPV Video & Optics
    • Frames & Structural Parts
    • Motors & Propulsion
    View all
  • 3D Printing2,204 products
    • 3D Printers
    • 3D Scanners & Digitizers
    • Laser Engravers & Cutters
    • Material Management & Upgrades
    View all
  • Filaments & Resins1,472 products
    • Filaments
    • Photopolymer Resins
    View all
  • Motors & Drivers463 products
    • BLDC Motor Drivers
    • DC & Geared Motors
    • DC Motor Drivers
    • Linear Actuators & Solenoids
    View all
  • Power & Batteries557 products
    • Battery Holders & Connectors
    • Breadboard Power
    • Chargers & BMS
    • DC-DC Converters
    View all
  • Semiconductors295 products
    • Diodes & Rectifiers
    • Interface & RF Encoder ICs
    • Logic ICs (74xx)
    • Logic ICs (CD4000)
    View all
  • Passive67 products
    • Capacitors
    • Circuit Protection
    • Crystals & Oscillators
    • Inductors
    View all
  • Displays & LEDs572 products
    • 7-Segment & Dot Matrix
    • Addressable LEDs
    • Character LCDs
    • Graphic LCDs
    View all
  • Switches & Relays184 products
    • Keypads & Touch
    • Push Buttons & Tactile
    • Relay Modules
    • Relays
    View all
  • Wires & Cables233 products
    • Board-to-Wire Connectors
    • Crimp & Splice
    • Headers & Dupont
    • Heat Shrink & Sleeving
    View all
  • Prototyping101 products
    • Breadboards
    • Interface Modules
    • PCBs & Perfboards
    View all
  • Tools & Test717 products
    • Bench Power Supplies
    • Hand Tools
    • Measuring Tools
    • Meters & Testers
    View all
  • Robotics180 products
    • Humanoid & Legged Robots
    • Robot Chassis & Platforms
    • Robotic Arms & Grippers
    • Wheels & Casters
    View all
  • STEM Kits268 products
    • Arduino Learning Kits
    • Coding & IoT Kits
    • Early Coding (Ages 3-8)
    • Invention Kits
    View all
  • Atal Tinkering Lab196 products
    • Package 1: Electronics, Robotics, IoT and Sensors
    • Package 2: Rapid Prototyping Tools
    • Package 3: Mechanical, Electrical and Measurement Tools
    • Package 4: Power Supply, Accessories and Safety Equipment
    View all
  • Mechanical Parts212 products
    • Bearings
    • Brackets & Mounts
    • Couplers
    • Fasteners & Standoffs
    View all
  • Audio109 products
    • Amplifier Modules
    • Buzzers & Sirens
    • Speakers
    View all
  1. Home
  2. ›Projects
  3. ›LoRa receiver

IoT & wireless projects

LoRa receiver with an OLED display

Shows the latest reading from any of the LoRa field nodes, with signal strength and age.

By Geekobot Learning Team

Intermediate
Difficulty
1–2 hours
Build time
₹872
Parts cost
5
Parts
ESP32
Platform
Add all parts · ₹872Start building
  • Garden & agriculture
  • Weather & environment
  • Learning & classroom
C3
Tap a part to see what it does
OverviewPartsWiringBuildCodeTroubleshootFAQIdeas

What you'll build

This receiver works with every LoRa node in the library. It shows the node name and each reading on its own line, plus the signal strength (RSSI) and how many seconds ago the packet arrived. Walk around with it to test the range before you fix a node in the field.

What you'll learn

  • Drawing text on an I²C display
  • LoRa radio and spreading factor
  1. ThinkThe ESP32-C3 listens for LoRa packets and shows each field with the signal strength
  2. ActSX1278 LoRa (Ra-02), 0.96" OLED

Parts list

Tick anything you already have and the total updates.

PartQtyPrice
  • C3
    ESP32-C3 SuperMini Development Board
    IOWC-1032

    The brain of the project

    × 1₹269₹269
  • SX1278 LoRa Module RA-02 433MHz
    IOWC-1756

    Long-range 433 MHz radio that sends small messages a kilometre or more across open fields with very little power.

    × 1₹369₹369
  • 0.96" OLED Display 128x64 (I2C)
    GB-DISP-0005Guide

    Crisp 128×64 monochrome screen over I²C.

    × 1₹167₹167
  • Solderless Breadboard (830 points)
    GB-PROT-0001Guide

    Holds everything together without soldering

    × 1₹18₹18
  • Dupont Jumper Wires (40 pcs)
    GB-WIRE-0001Guide

    Connects the parts

    × 1₹49₹49

Complete kit

5 of 5 parts in one tap

₹872

GST included

3% off these parts while the whole kit stays in your cart

Parts you still need

₹872

5 of 5 parts. Tick anything you already have.

About ₹26,160 before bulk pricing for 30 kits.

Request bulk quote

Tools you'll need

  • Digital Multimeter
  • Wire Stripper and Cutter

Learn the parts

  • MAX30102 Heart Rate and SpO2 Sensor Guide
  • Arduino Uno

Calculators for this build

  • Wireless link budget and range calculator
  • Antenna length calculator (quarter-wave and dipole)
  • I²C pull-up resistor calculator

Wiring

Follow the colours: red is power, dark grey is ground, blue is a signal.

PartPinConnect toNote
SX1278 LoRa (Ra-02)3.3V3.3V
SX1278 LoRa (Ra-02)GNDGND
SX1278 LoRa (Ra-02)NSSGPIO7
SX1278 LoRa (Ra-02)MOSIGPIO6
SX1278 LoRa (Ra-02)MISOGPIO5
SX1278 LoRa (Ra-02)SCKGPIO4
SX1278 LoRa (Ra-02)RSTGPIO10
SX1278 LoRa (Ra-02)DIO0GPIO3
0.96" OLEDVCC3.3V
0.96" OLEDGNDGND
0.96" OLEDSCLGPIO9
0.96" OLEDSDAGPIO8
  • SX1278 LoRa (Ra-02)3.3V → 3.3V
  • SX1278 LoRa (Ra-02)GND → GND
  • SX1278 LoRa (Ra-02)NSS → GPIO7
  • SX1278 LoRa (Ra-02)MOSI → GPIO6
  • SX1278 LoRa (Ra-02)MISO → GPIO5
  • SX1278 LoRa (Ra-02)SCK → GPIO4
  • SX1278 LoRa (Ra-02)RST → GPIO10
  • SX1278 LoRa (Ra-02)DIO0 → GPIO3
  • 0.96" OLEDVCC → 3.3V
  • 0.96" OLEDGND → GND
  • 0.96" OLEDSCL → GPIO9
  • 0.96" OLEDSDA → GPIO8
Built it? Check your wiring before you power up.Pick the pin each wire went to and we'll point out swapped pins, power mistakes and pins that clash.

Step-by-step build

0 of 8 done

Code

lora_receiver_oled.inoVerify & upload in Electrolark
// LoRa receiver with an OLED display
// Geekobot project library · board: ESP32-C3 SuperMini
// Wiring diagram, parts list and build steps: Geekobot project page "lora-receiver-oled"

#include <SPI.h>
#include <LoRa.h>
#include <Wire.h>
#include <Adafruit_GFX.h>
#include <Adafruit_SSD1306.h>

// ---- pins ----
const uint8_t LORA_RST = 10;
const uint8_t LORA_DIO0 = 3;

Adafruit_SSD1306 oled(128, 64, &Wire, -1);

String last = "(waiting)";
int rssi = 0;
unsigned long lastRx = 0, lastShow = 0;

void setup() {
  Serial.begin(115200);
  LoRa.setPins(SS, LORA_RST, LORA_DIO0);
  if (!LoRa.begin(433E6)) Serial.println(F("LoRa module not found"));
  LoRa.setSpreadingFactor(10);   // slower but reaches further
  if (!oled.begin(SSD1306_SWITCHCAPVCC, 0x3C)) Serial.println(F("OLED not found"));
  oled.setTextColor(SSD1306_WHITE);
  oled.clearDisplay();
  oled.display();
}

void loop() {
  int size = LoRa.parsePacket();
  if (size) {
    last = "";
    while (LoRa.available()) last += (char)LoRa.read();
    rssi = LoRa.packetRssi(); lastRx = millis();
    Serial.print(last); Serial.print(F("  RSSI ")); Serial.println(rssi);
  }
  bool alarm = last.indexOf("ALERT") >= 0 && millis() - lastRx < 120000;
  if (millis() - lastShow < 500) return;
  lastShow = millis();
  oled.clearDisplay(); oled.setTextSize(1); oled.setCursor(0, 0);
  int a = 0;                                       // one field per line: NODE;name=value;...
  for (int row = 0; row < 5 && a <= (int)last.length(); row++) {
    int z = last.indexOf(';', a); if (z < 0) z = last.length();
    oled.setCursor(0, row * 10); oled.print(last.substring(a, z));
    a = z + 1;
  }
  oled.setCursor(0, 54);
  if (lastRx) { oled.print(F("RSSI ")); oled.print(rssi); oled.print(F("  ")); oled.print((millis() - lastRx) / 1000); oled.print(F("s ago")); }
  else oled.print(F("No signal yet"));
  oled.display();
}

Run it: what this code does

The sketch above runs here on a simulated ESP32-C3. Move the sliders for the sensors and buttons it reads, and watch the Serial monitor, display and outputs change.

Troubleshooting

"LoRa module not found"+

Check the four SPI wires and that NSS and RST go to the pins in the sketch.

Short range+

Mount both antennas high and vertical, clear of metal. Range drops sharply behind buildings.

Screen stays blank+

Check SDA/SCL and try address 0x3D. Run an I²C scanner to confirm.

Nothing happens after uploading+

Open the Serial Monitor at 115200 baud and check for messages. Make sure you chose the right board and port in the Arduino IDE.

Upload fails+

Close other programs using the serial port, try another USB cable (some are charge-only) and press reset just before uploading.

FAQ

How do I power it without a computer?+

Use a 5 V USB phone charger or a power bank into the board's USB port.

What parts do I need to build the loRa receiver with an OLED display?+

5 parts: ESP32-C3 SuperMini Development Board, SX1278 LoRa Module RA-02 433MHz, 0.96" OLED Display 128x64 (I2C), Solderless Breadboard (830 points) and Dupont Jumper Wires (40 pcs). Tools: Digital Multimeter and Wire Stripper and Cutter. On this page you can tick the parts you already have and add only the rest to your cart.

How hard is it and how long does it take?+

It is a intermediate project and takes about 1–2 hours. The build on this page has 8 steps.

Do I need to write the code myself?+

No. This page has the complete, tested code (lora_receiver_oled.ino). Install these libraries first: LoRa, Adafruit SSD1306 and Adafruit GFX Library.

Can I see what the code does before I build it?+

Yes. The Run it panel under the code runs this exact sketch on a simulated board. Move the sliders or press the buttons for the sensors it reads, and the Serial monitor, display and outputs react as they will on the real build. It is a simulation, so real readings depend on your parts and wiring.

How much does the loRa receiver with an OLED display cost to build?+

About ₹872 for the parts at the prices on this page, plus tools if you do not have them. Quantity price breaks lower the cost when you build several.

What will I learn from this project?+

Drawing text on an I²C display; LoRa radio and spreading factor.

What can I build next with these parts?+

Ideas that reuse this build: Receiver with an alarm and LoRa field soil node. They are listed under Take it further on this page.

Take it further

  • Receiver with an alarm
  • LoRa field soil node

Related projects

  • NANO
    IoT & wireless
    Intermediate· 2 hours

    GPS speedometer and clock

    A bike or car speedometer that needs no wheel sensor: satellites do the measuring.

    ₹768 · 5 partsArduino
  • UNO1865018650
    IoT & wireless
    Intermediate· 2–3 hours

    GPS route logger

    Records where you went every five seconds, ready to open on a map.

    ₹1,795 · 10 partsArduino
  • UNO
    IoT & wireless
    Intermediate· 2–3 hours

    Wireless doorbell with nRF24L01

    Two boards, two radios: press the button at the gate and it rings indoors.

    ₹426 · 8 partsArduino
  • C3
    IoT & wireless
    Beginner· 1–2 hours

    Wi-Fi weather station dashboard

    Check temperature, humidity and pressure from any phone on your Wi-Fi.

    ₹552 · 5 partsESP32

Learning project. Check every circuit and the datasheet of each part before you power it up.

Run itChange the inputs and watch the output
(waiting)
No signal yet
listeningLoRa radio
Serial monitor115200 baud
 

A simulation of the sketch above, so you know what to expect. Real readings vary with your parts and wiring.

Ask the Community

Ask a question Share your build