Same-day dispatch before 2 PM · Free delivery over ₹999 · GST invoices Get the appPrices incl. GST
Geekobot
Snap & SendNEWGeeko AIWhere's myOrder
Log in
Products
  • Projects
    • Component guidesHow parts work, with code you can run
    • Learning pathsFrom your first LED to your first robot
    • Workshops & eventsOnline sessions for makers and classes
    • ElectrolarkFree guided builds, simulator and certificates
    • Students & teachersStudent discount and classroom help
    • CommunityShare builds and ask other makers
    • CalculatorsOhm's law, LED resistor, 555 and 100+ more
    • Circuit builderWire parts and run the circuit, powered by Electrolark
    • Geeko AIAsk what to buy or how to wire it
    • Snap & SendPhotograph a part or list, we find it
    • Part finderAnswer a few questions, get the right part
    • Compatibility checkWill these two parts work together?
    • Compare partsSpecs side by side
    • Business & bulk ordersGST invoices, credit and volume prices
    • Request a quotationSend your list, get a quote
    • Classroom kitsPer-student kits and lab bundles
    • Gift cardsFor students, teams and events
  • Atal Tinkering Lab
BOM to cart
Geekobot

Components, kits and know-how for makers, students, engineers, labs and businesses across India.

Ask Geeko AIOrders, parts and projects, any timeEmail supportReply within 1 working dayGet the Geekobot appAdd it to your home screen, free

Follow us

Shop

  • Boards & SBCs
  • Sensors & Modules
  • IoT & Wireless
  • Drone & FPV
  • 3D Printing
  • Filaments & Resins
  • Motors & Drivers
  • Power & Batteries
  • Semiconductors
  • Passive
  • Displays & LEDs
  • Switches & Relays
  • Wires & Cables
  • Prototyping
  • Tools & Test
  • Robotics
  • STEM Kits
  • Atal Tinkering Lab
  • Mechanical Parts
  • Audio

Orders

  • Track your order
  • Help & support
  • Shipping and delivery
  • Refunds and cancellation
  • Contact us

Learn

  • Projects
  • Geeko AI project assistant
  • Learning paths
  • Guides
  • Calculators
  • Electrolark: free guided builds

Part tools

  • Part finder
  • Compare parts
  • Will it work with my board?

Institutions

  • Classroom kits
  • Atal Tinkering Lab
  • Students & teachers
  • Workshops & Events

Business

  • Business & education
  • Request a quotation
  • BOM bulk upload
  • Quick order by SKU

Company

  • About Geekobot
  • Community
  • Gift cards
  • Terms & conditions
  • Privacy policy
  • Product directory
  • Sitemap

© 2026 Geekobot, a trade name of OLatus Systems Private Limited. All rights reserved.

20, 1st Floor, Neeladri Complex, 10th Cross, Sampige Rd, 2nd Main, Malleshwaram, Bengaluru, Karnataka 560003 · GSTIN 29AACCO0462F1ZM

+91 91810 15607 · connect@geekobot.in · Monday to Saturday, 10 AM to 2 PM IST

UPI · CARDS · NETBANKING · GST INVOICES

ShopProjectsGeeko AIGuides
Compare 0 parts →
Log in

Shop by category

Shop all components
  • Boards & SBCs1,910 products
    • Alternative Single Board Computers
    • Arduino Ecosystem
    • FPGA & Logic Boards
    • Microcontroller & Wireless Boards
    View all
  • Sensors & Modules4,701 products
    • Biomedical & Heart Rate
    • Current, Voltage & Power
    • Force, Weight & Pressure
    • Gas, Weather & Environmental
    View all
  • IoT & Wireless2,314 products
    • RF Modules
    • RFID & NFC
    • Antennas & RF Accessories
    • Cameras & Smart Vision
    View all
  • Drone & FPV3,558 products
    • Flight Control & Navigation
    • FPV Video & Optics
    • Frames & Structural Parts
    • Motors & Propulsion
    View all
  • 3D Printing2,204 products
    • 3D Printers
    • 3D Scanners & Digitizers
    • Laser Engravers & Cutters
    • Material Management & Upgrades
    View all
  • Filaments & Resins1,472 products
    • Filaments
    • Photopolymer Resins
    View all
  • Motors & Drivers463 products
    • BLDC Motor Drivers
    • DC & Geared Motors
    • DC Motor Drivers
    • Linear Actuators & Solenoids
    View all
  • Power & Batteries557 products
    • Battery Holders & Connectors
    • Breadboard Power
    • Chargers & BMS
    • DC-DC Converters
    View all
  • Semiconductors295 products
    • Diodes & Rectifiers
    • Interface & RF Encoder ICs
    • Logic ICs (74xx)
    • Logic ICs (CD4000)
    View all
  • Passive67 products
    • Capacitors
    • Circuit Protection
    • Crystals & Oscillators
    • Inductors
    View all
  • Displays & LEDs572 products
    • 7-Segment & Dot Matrix
    • Addressable LEDs
    • Character LCDs
    • Graphic LCDs
    View all
  • Switches & Relays184 products
    • Keypads & Touch
    • Push Buttons & Tactile
    • Relay Modules
    • Relays
    View all
  • Wires & Cables233 products
    • Board-to-Wire Connectors
    • Crimp & Splice
    • Headers & Dupont
    • Heat Shrink & Sleeving
    View all
  • Prototyping101 products
    • Breadboards
    • Interface Modules
    • PCBs & Perfboards
    View all
  • Tools & Test717 products
    • Bench Power Supplies
    • Hand Tools
    • Measuring Tools
    • Meters & Testers
    View all
  • Robotics180 products
    • Humanoid & Legged Robots
    • Robot Chassis & Platforms
    • Robotic Arms & Grippers
    • Wheels & Casters
    View all
  • STEM Kits268 products
    • Arduino Learning Kits
    • Coding & IoT Kits
    • Early Coding (Ages 3-8)
    • Invention Kits
    View all
  • Atal Tinkering Lab196 products
    • Package 1: Electronics, Robotics, IoT and Sensors
    • Package 2: Rapid Prototyping Tools
    • Package 3: Mechanical, Electrical and Measurement Tools
    • Package 4: Power Supply, Accessories and Safety Equipment
    View all
  • Mechanical Parts212 products
    • Bearings
    • Brackets & Mounts
    • Couplers
    • Fasteners & Standoffs
    View all
  • Audio109 products
    • Amplifier Modules
    • Buzzers & Sirens
    • Speakers
    View all
  1. Home
  2. ›Projects
  3. ›Incubator SMS

IoT & wireless projects

Egg incubator overheat SMS alert

Texts you if the incubator runs hotter than 39 °C, even when you are away.

By Geekobot Learning Team

Intermediate
Difficulty
2 hours
Build time
₹1,014
Parts cost
11
Parts
Arduino
Platform
Add all parts · ₹1,014Start building
  • Garden & agriculture
  • Workshop & industry
UNO1865018650
Tap a part to see what it does
OverviewPartsWiringBuildCodeTroubleshootFAQIdeas

What you'll build

A separate probe beside the eggs watches the temperature, whatever the main controller does. Above 39 °C the buzzer sounds and an SMS goes to your phone so a helper can open the lid and switch off the heater.

What you'll learn

  • 1-Wire bus and pull-up resistors
  • AT commands and SMS
  • Active vs passive buzzers
Safety

Put your own number in PHONE before uploading. The project needs a SIM with SMS credit on a network that still offers 2G where you live.

  1. SenseDS18B20 probe
  2. ThinkThe board watches the sensor and sends one SMS when the alarm starts
  3. ActSIM800L GSM module, Active buzzer

Parts list

Tick anything you already have and the total updates.

PartQtyPrice
  • UNO
    Uno R3 CH340G ATmega328p Compatible Development Board
    GB-SBCD-0329Guide

    The brain of the project

    × 1₹204₹204
  • Arduino USB-A to USB-B Data Cable for UNO/MEGA
    GB-SBCD-0122

    Connects the Uno to your computer to upload code and power it

    × 1₹51₹51
  • DS18B20 Waterproof Temperature Probe – 1m Cable
    SENS-3844

    Waterproof stainless-steel probe that reads liquid or soil temperature from −55 to +125 °C (±0.5 °C).

    × 1₹50₹50
  • SIM800L GPRS GSM Module Core Board with Antenna
    IOWC-0884

    A small 2G phone module: with a SIM card it sends and receives SMS, so the project can alert you or take commands from anywhere with mobile coverage.

    × 1₹369₹369
  • Active Buzzer Module 3.3–5V
    GB-AUDO-0001Guide

    Active buzzer with a built-in oscillator: apply power and it beeps at about 2.3 kHz.

    × 1₹27₹27
  • Resistor Assortment Kit (30 Values)
    GB-PASV-0002Guide

    4.7 kΩ pull-up between DATA and VCC; 1 kΩ + 2 kΩ divider on the RXD line from a 5 V board; 1 kΩ + 2 kΩ divider for the 3.3 V input

    × 1₹33₹33
  • 18650
    18650 Battery Holder
    GB-PWRB-0015Guide

    Feeds the SIM800L directly

    × 1₹29₹29
  • 18650
    18650 Li-ion Rechargeable Cell 2600mAh
    GB-PWRB-0011-01

    3.7 V cell for the GSM module's 2 A bursts

    × 1₹149₹149
  • MT3608 Mini Boost Converter Module
    GB-PWRB-0005Guide

    Raises the cell's 3.0–4.2 V to a steady 5 V for the board

    × 1₹35₹35
  • Solderless Breadboard (830 points)
    GB-PROT-0001Guide

    Holds everything together without soldering

    × 1₹18₹18
  • Dupont Jumper Wires (40 pcs)
    GB-WIRE-0001Guide

    Connects the parts

    × 1₹49₹49

Complete kit

11 of 11 parts in one tap

₹1,014

GST included

3% off these parts while the whole kit stays in your cart

Parts you still need

₹1,014

11 of 11 parts. Tick anything you already have.

About ₹30,420 before bulk pricing for 30 kits.

Request bulk quote

Tools you'll need

  • Digital Multimeter
  • Wire Stripper and Cutter

Learn the parts

  • Atal Tinkering Lab (ATL)
  • Active vs Passive Buzzers
  • I2C Explained
  • Li-ion, 18650 and LiPo Batteries
  • MT3608 boost converter
  • Arduino Uno

Calculators for this build

  • UART baud rate error calculator (AVR / Arduino)
  • Adjustable regulator feedback resistor calculator
  • Boost converter inductor calculator

Wiring

Follow the colours: red is power, dark grey is ground, blue is a signal.

The SIM800L runs straight from the 18650 cell (VCC and GND), never from the board's 5 V pin. Join the cell − to the board GND. A capacitor of 470–1000 µF across the module's VCC and GND stops resets. Set the boost converter to 5.0 V with a multimeter before connecting the board. Cell + → boost IN+, cell − (TP4056 OUT−) → boost IN−, then boost OUT+ → board 5V pin and OUT− → GND. A bare 18650 (3.0–4.2 V) cannot run a 5 V board by itself.

PartPinConnect toNote
DS18B20 probeVCC5V
DS18B20 probeDATAD2
DS18B20 probeGNDGND
SIM800L GSM moduleVCC (3.7–4.2 V)external
SIM800L GSM moduleGNDGND
SIM800L GSM moduleTXDD3
SIM800L GSM moduleRXDD43.3 V input: feed it from the board pin through a divider (1 kΩ in series, 2 kΩ to GND)
Active buzzerVCC5V
Active buzzerGNDGND
Active buzzerI/OD5
  • DS18B20 probeVCC → 5V
  • DS18B20 probeDATA → D2
  • DS18B20 probeGND → GND
  • SIM800L GSM moduleVCC (3.7–4.2 V) → external
  • SIM800L GSM moduleGND → GND
  • SIM800L GSM moduleTXD → D3
  • SIM800L GSM moduleRXD → D43.3 V input: feed it from the board pin through a divider (1 kΩ in series, 2 kΩ to GND)
  • Active buzzerVCC → 5V
  • Active buzzerGND → GND
  • Active buzzerI/O → D5
Built it? Check your wiring before you power up.Pick the pin each wire went to and we'll point out swapped pins, power mistakes and pins that clash.

Step-by-step build

0 of 9 done

Code

sms_egg_incubator_overheat_alert.inoVerify & upload in Electrolark
// Egg incubator overheat SMS alert
// Geekobot project library · board: Arduino Uno
// Wiring diagram, parts list and build steps: Geekobot project page "sms-egg-incubator-overheat-alert"

#include <OneWire.h>
#include <DallasTemperature.h>
#include <SoftwareSerial.h>

// ---- pins ----
const uint8_t ONEWIRE_PIN = 2;
const uint8_t GSM_RX = 3;
const uint8_t GSM_TX = 4;
const uint8_t BUZZER_PIN = 5;

OneWire oneWire(ONEWIRE_PIN);
DallasTemperature probes(&oneWire);

// ---- latest readings ----
float probeC = 0;

SoftwareSerial gsm(GSM_RX, GSM_TX);
const char PHONE[] = "+91XXXXXXXXXX";   // your mobile number, with the country code
const unsigned long MIN_GAP_MS = 30 * 60000UL;   // never more than one SMS in this time
bool alarm = false;
unsigned long lastSms = 0, lastRead = 0;
bool sentOnce = false;

float readProbeC() {
  probes.requestTemperatures();
  return probes.getTempCByIndex(0);
}

void setBuzzer(bool on) { digitalWrite(BUZZER_PIN, on ? HIGH : LOW); }

void sendSms(const String& text) {
  gsm.println(F("AT+CMGF=1")); delay(300);
  gsm.print(F("AT+CMGS=\"")); gsm.print(PHONE); gsm.println('"'); delay(500);
  gsm.print(text); gsm.write(26);               // Ctrl+Z sends the message
  delay(4000);
  while (gsm.available()) Serial.write(gsm.read());
  Serial.print(F("SMS sent: ")); Serial.println(text);
}

void setup() {
  Serial.begin(115200);
  probes.begin();
  pinMode(BUZZER_PIN, OUTPUT);
  setBuzzer(false);
  gsm.begin(9600);
  delay(3000);                       // give the module time to find the network
  gsm.println(F("AT+CMGF=1")); delay(300);   // SMS in text mode
  gsm.println(F("AT+CNMI=2,2,0,0,0")); delay(300);   // print new SMS straight to the serial line
}

void loop() {
  while (gsm.available()) Serial.write(gsm.read());   // show the module's replies
  if (millis() - lastRead < 1000) return;
  lastRead = millis();
  probeC = readProbeC();
  if (!alarm && (probeC > 39)) {
    alarm = true;
    if (!sentOnce || millis() - lastSms > MIN_GAP_MS) { sendSms(String("Incubator overheating (") + String(probeC) + ")"); lastSms = millis(); sentOnce = true; }
  } else if (alarm && (probeC < 38)) {
    alarm = false; Serial.println(F("Back to normal"));
  }
  setBuzzer(alarm);
}

Run it: what this code does

The sketch above runs here on a simulated Arduino Uno. Move the sliders for the sensors and buttons it reads, and watch the Serial monitor, display and outputs change.

Troubleshooting

Probe reads −127 °C+

The 4.7 kΩ pull-up is missing or DATA is on the wrong pin. Check the yellow wire.

Module keeps restarting+

The supply sags during transmit bursts. Use a good 18650 cell, short thick wires and a large capacitor.

No network (LED blinks once a second)+

Once every 3 seconds means registered. If it never registers, the SIM's network may have switched 2G off in your area.

Beeps constantly at power-up+

Low-triggered module: invert the logic in setBuzzer().

Nothing happens after uploading+

Open the Serial Monitor at 115200 baud and check for messages. Make sure you chose the right board and port in the Arduino IDE.

Upload fails+

Close other programs using the serial port, try another USB cable (some are charge-only) and press reset just before uploading.

FAQ

Can I use an ESP32 instead of the Arduino?+

Yes. Most of the code works unchanged on an ESP32 with the ESP32 board package. Watch for 5 V modules: ESP32 pins are 3.3 V, so 5 V output signals need a resistor divider.

How do I power it without a computer?+

Use a 5 V USB phone charger or a power bank into the board's USB port.

What parts do I need to build the egg incubator overheat SMS alert?+

11 parts: Uno R3 CH340G ATmega328p Compatible Development Board, Arduino USB-A to USB-B Data Cable for UNO/MEGA, DS18B20 Waterproof Temperature Probe – 1m Cable, SIM800L GPRS GSM Module Core Board with Antenna, Active Buzzer Module 3.3–5V, Resistor Assortment Kit (30 Values), 18650 Battery Holder, 18650 Li-ion Rechargeable Cell 2600mAh, MT3608 Mini Boost Converter Module, Solderless Breadboard (830 points), plus 1 more. Tools: Digital Multimeter and Wire Stripper and Cutter. On this page you can tick the parts you already have and add only the rest to your cart.

How hard is it and how long does it take?+

It is a intermediate project and takes about 2 hours. The build on this page has 9 steps.

Do I need to write the code myself?+

No. This page has the complete, tested code (sms_egg_incubator_overheat_alert.ino). Install these libraries first: OneWire and DallasTemperature.

Can I see what the code does before I build it?+

Yes. The Run it panel under the code runs this exact sketch on a simulated board. Move the sliders or press the buttons for the sensors it reads, and the Serial monitor, display and outputs react as they will on the real build. It is a simulation, so real readings depend on your parts and wiring.

How much does the egg incubator overheat SMS alert cost to build?+

About ₹1,014 for the parts at the prices on this page, plus tools if you do not have them. Quantity price breaks lower the cost when you build several.

What will I learn from this project?+

1-Wire bus and pull-up resistors; AT commands and SMS; Active vs passive buzzers.

Is it safe to build?+

Put your own number in PHONE before uploading. The project needs a SIM with SMS credit on a network that still offers 2G where you live.

What can I build next with these parts?+

Ideas that reuse this build: Egg incubator overheat alarm and Egg incubator controller. They are listed under Take it further on this page.

Take it further

  • Egg incubator overheat alarm
  • Egg incubator controller

Related projects

  • NANO
    IoT & wireless
    Intermediate· 2 hours

    GPS speedometer and clock

    A bike or car speedometer that needs no wheel sensor: satellites do the measuring.

    ₹768 · 5 partsArduino
  • UNO1865018650
    IoT & wireless
    Intermediate· 2–3 hours

    GPS route logger

    Records where you went every five seconds, ready to open on a map.

    ₹1,795 · 10 partsArduino
  • UNO
    IoT & wireless
    Intermediate· 2–3 hours

    Wireless doorbell with nRF24L01

    Two boards, two radios: press the button at the gate and it rings indoors.

    ₹426 · 8 partsArduino
  • C3
    IoT & wireless
    Beginner· 1–2 hours

    Wi-Fi weather station dashboard

    Check temperature, humidity and pressure from any phone on your Wi-Fi.

    ₹552 · 5 partsESP32

Learning project. Check every circuit and the datasheet of each part before you power it up.

Run itChange the inputs and watch the output
on the networkSIM800L GSM module
Active buzzer (D5) silent
Serial monitor115200 baud
 

A simulation of the sketch above, so you know what to expect. Real readings vary with your parts and wiring.

Ask the Community

Ask a question Share your build