Shop by category
Shop all componentsPower, batteries & solar
V load = V oc − I × R intR int = (V oc − V load) ÷ II short = V oc ÷ R intP max = V oc² ÷ (4 × R int)A 4.2 V cell with 60 mΩ internal resistance supplying 5 A: V = 4.2 − 5 × 0.06 = 3.9 V, 1.5 W is wasted as heat, and a short circuit would draw 70 A.
Every battery has some internal resistance. It makes the terminal voltage fall when current flows, which is why a robot can reset when its motors start even though the battery reads full when idle.
Internal resistance rises as batteries age and in the cold. To measure it, record the open-circuit voltage, apply a known load for a few seconds, and read the voltage under load. Never short a lithium cell to test it.
Measure open-circuit voltage, apply a known load, measure again: R = (V oc − V load) ÷ I.
A healthy cell is usually around 20 to 60 mΩ. It rises as the cell ages.
Current through the internal resistance causes a drop of I × R, so heavy loads sag more.
V load = V oc − I × R int; R int = (V oc − V load) ÷ I; I short = V oc ÷ R int; P max = V oc² ÷ (4 × R int).
A 4.2 V cell with 60 mΩ internal resistance supplying 5 A: V = 4.2 − 5 × 0.06 = 3.9 V, 1.5 W is wasted as heat, and a short circuit would draw 70 A.
Geekobot builds that use it include DIY 18650 power bank, 18650 charging station with USB output, Bike speedometer and trip meter and Microclimates around the school. Each has the full parts list, wiring and code.
Results are estimates for design and learning. Check critical designs against the component datasheet. Made by the Geekobot Learning Team. How we write our calculators