Shop by category
Shop all componentsMotors & mechanics
Use the torque your stepper really produces at this speed from its torque curve, not the holding torque. Torque falls quickly as RPM rises, and the usable force is lower again after friction in the guides.
Speed = lead × RPM ÷ 60Thrust F = 2π × efficiency × torque ÷ leadSteps per mm = (full steps × microsteps) ÷ leadLead = pitch × number of startsA T8×8 screw (8 mm lead) at 300 RPM moves 8 × 300 ÷ 60 = 40 mm/s. With 0.4 N·m and 30% efficiency the thrust is 2π × 0.3 × 0.4 ÷ 0.008 = 94 N, about 9.6 kg. A 1.8° motor at 1/16 microstepping needs 200 × 16 ÷ 8 = 400 steps per mm.
A lead screw turns the rotation of a stepper motor into straight-line motion. The lead, the distance the nut moves in one turn, sets both the speed and the force: a longer lead moves faster but pushes with less force.
Low-lead screws with a bronze nut have low efficiency, which is useful because they hold a load without power. Ball screws are far more efficient and move smoothly, but they back-drive, so vertical axes need a brake. Keep the screw straight and supported, because speeds near the critical RPM make long screws whip.
Lead is the travel per revolution: pitch × number of starts. A T8×8 screw has a 2 mm pitch and 4 starts, so it moves 8 mm per turn; a T8×2 moves 2 mm per turn.
Screws with low efficiency (under about 50%), such as T8 with a bronze nut, usually hold. Ball screws and steep multi-start screws can back-drive, so add a brake or counterweight on vertical axes.
Speed = lead × RPM ÷ 60. An 8 mm lead at 300 RPM moves 40 mm/s.
Speed = lead × RPM ÷ 60; Thrust F = 2π × efficiency × torque ÷ lead; Steps per mm = (full steps × microsteps) ÷ lead; Lead = pitch × number of starts.
A T8×8 screw (8 mm lead) at 300 RPM moves 8 × 300 ÷ 60 = 40 mm/s. With 0.4 N·m and 30% efficiency the thrust is 2π × 0.3 × 0.4 ÷ 0.008 = 94 N, about 9.6 kg. A 1.8° motor at 1/16 microstepping needs 200 × 16 ÷ 8 = 400 steps per mm.
Geekobot builds that use it include Stepper photo turntable, Stepper-motor dial thermometer, Pico stepper dial set by a knob (MicroPython) and Stepper soil moisture dial. Each has the full parts list, wiring and code.
Results are estimates for design and learning. Check critical designs against the component datasheet. Made by the Geekobot Learning Team. How we write our calculators