Same-day dispatch before 2 PM · Free delivery over ₹999 · GST invoices Get the appPrices incl. GST
Geekobot
Snap & SendNEWGeeko AIWhere's myOrder
Log in
Products
  • Projects
    • Component guidesHow parts work, with code you can run
    • Learning pathsFrom your first LED to your first robot
    • Workshops & eventsOnline sessions for makers and classes
    • ElectrolarkFree guided builds, simulator and certificates
    • Students & teachersStudent discount and classroom help
    • CommunityShare builds and ask other makers
    • CalculatorsOhm's law, LED resistor, 555 and 100+ more
    • Circuit builderWire parts and run the circuit, powered by Electrolark
    • Geeko AIAsk what to buy or how to wire it
    • Snap & SendPhotograph a part or list, we find it
    • Part finderAnswer a few questions, get the right part
    • Compatibility checkWill these two parts work together?
    • Compare partsSpecs side by side
    • Business & bulk ordersGST invoices, credit and volume prices
    • Request a quotationSend your list, get a quote
    • Classroom kitsPer-student kits and lab bundles
    • Gift cardsFor students, teams and events
  • Atal Tinkering Lab
BOM to cart
Geekobot

Components, kits and know-how for makers, students, engineers, labs and businesses across India.

Ask Geeko AIOrders, parts and projects, any timeEmail supportReply within 1 working dayGet the Geekobot appAdd it to your home screen, free

Follow us

Shop

  • Boards & SBCs
  • Sensors & Modules
  • IoT & Wireless
  • Drone & FPV
  • 3D Printing
  • Filaments & Resins
  • Motors & Drivers
  • Power & Batteries
  • Semiconductors
  • Passive
  • Displays & LEDs
  • Switches & Relays
  • Wires & Cables
  • Prototyping
  • Tools & Test
  • Robotics
  • STEM Kits
  • Atal Tinkering Lab
  • Mechanical Parts
  • Audio

Orders

  • Track your order
  • Help & support
  • Shipping and delivery
  • Refunds and cancellation
  • Contact us

Learn

  • Projects
  • Geeko AI project assistant
  • Learning paths
  • Guides
  • Calculators
  • Electrolark: free guided builds

Part tools

  • Part finder
  • Compare parts
  • Will it work with my board?

Institutions

  • Classroom kits
  • Atal Tinkering Lab
  • Students & teachers
  • Workshops & Events

Business

  • Business & education
  • Request a quotation
  • BOM bulk upload
  • Quick order by SKU

Company

  • About Geekobot
  • Community
  • Gift cards
  • Terms & conditions
  • Privacy policy
  • Product directory
  • Sitemap

© 2026 Geekobot, a trade name of OLatus Systems Private Limited. All rights reserved.

20, 1st Floor, Neeladri Complex, 10th Cross, Sampige Rd, 2nd Main, Malleshwaram, Bengaluru, Karnataka 560003 · GSTIN 29AACCO0462F1ZM

+91 91810 15607 · connect@geekobot.in · Monday to Saturday, 10 AM to 2 PM IST

UPI · CARDS · NETBANKING · GST INVOICES

ShopProjectsGeeko AIGuides
Compare 0 parts →
Log in

Shop by category

Shop all components
  • Boards & SBCs1,910 products
    • Alternative Single Board Computers
    • Arduino Ecosystem
    • FPGA & Logic Boards
    • Microcontroller & Wireless Boards
    View all
  • Sensors & Modules4,701 products
    • Biomedical & Heart Rate
    • Current, Voltage & Power
    • Force, Weight & Pressure
    • Gas, Weather & Environmental
    View all
  • IoT & Wireless2,314 products
    • RF Modules
    • RFID & NFC
    • Antennas & RF Accessories
    • Cameras & Smart Vision
    View all
  • Drone & FPV3,558 products
    • Flight Control & Navigation
    • FPV Video & Optics
    • Frames & Structural Parts
    • Motors & Propulsion
    View all
  • 3D Printing2,204 products
    • 3D Printers
    • 3D Scanners & Digitizers
    • Laser Engravers & Cutters
    • Material Management & Upgrades
    View all
  • Filaments & Resins1,472 products
    • Filaments
    • Photopolymer Resins
    View all
  • Motors & Drivers463 products
    • BLDC Motor Drivers
    • DC & Geared Motors
    • DC Motor Drivers
    • Linear Actuators & Solenoids
    View all
  • Power & Batteries557 products
    • Battery Holders & Connectors
    • Breadboard Power
    • Chargers & BMS
    • DC-DC Converters
    View all
  • Semiconductors295 products
    • Diodes & Rectifiers
    • Interface & RF Encoder ICs
    • Logic ICs (74xx)
    • Logic ICs (CD4000)
    View all
  • Passive67 products
    • Capacitors
    • Circuit Protection
    • Crystals & Oscillators
    • Inductors
    View all
  • Displays & LEDs572 products
    • 7-Segment & Dot Matrix
    • Addressable LEDs
    • Character LCDs
    • Graphic LCDs
    View all
  • Switches & Relays184 products
    • Keypads & Touch
    • Push Buttons & Tactile
    • Relay Modules
    • Relays
    View all
  • Wires & Cables233 products
    • Board-to-Wire Connectors
    • Crimp & Splice
    • Headers & Dupont
    • Heat Shrink & Sleeving
    View all
  • Prototyping101 products
    • Breadboards
    • Interface Modules
    • PCBs & Perfboards
    View all
  • Tools & Test717 products
    • Bench Power Supplies
    • Hand Tools
    • Measuring Tools
    • Meters & Testers
    View all
  • Robotics180 products
    • Humanoid & Legged Robots
    • Robot Chassis & Platforms
    • Robotic Arms & Grippers
    • Wheels & Casters
    View all
  • STEM Kits268 products
    • Arduino Learning Kits
    • Coding & IoT Kits
    • Early Coding (Ages 3-8)
    • Invention Kits
    View all
  • Atal Tinkering Lab196 products
    • Package 1: Electronics, Robotics, IoT and Sensors
    • Package 2: Rapid Prototyping Tools
    • Package 3: Mechanical, Electrical and Measurement Tools
    • Package 4: Power Supply, Accessories and Safety Equipment
    View all
  • Mechanical Parts212 products
    • Bearings
    • Brackets & Mounts
    • Couplers
    • Fasteners & Standoffs
    View all
  • Audio109 products
    • Amplifier Modules
    • Buzzers & Sirens
    • Speakers
    View all
  1. Home
  2. ›Projects
  3. ›Power cut logger

Power & solar projects

Power cut logger with date and time

Keeps a dated record of every power cut and how long it lasted.

By Geekobot Learning Team

Intermediate
Difficulty
2 hours
Build time
₹1,623
Parts cost
12
Parts
Arduino
Platform
Add all parts · ₹1,623Start buildingLearn it on Electrolark
  • Energy & power
  • Measurement & tools
  • Home automation
UNO1865018650
Tap a part to see what it does
OverviewPartsWiringBuildCodeTroubleshootFAQIdeas

What you'll build

The divider watches the output of a 5 V adapter plugged into the mains. Every ten seconds the logger writes the time and that voltage to the SD card, running on a backup cell. When mains goes, the reading drops to 0 V. Open the file in a spreadsheet to count the cuts and their length, useful evidence when you complain to the supplier.

What you'll learn

  • Real-time clocks and backup batteries
  • SPI devices and CSV logging
  • Voltage dividers and ADC scaling
  1. SenseAdapter voltage divider (100 kΩ + 10 kΩ)
  2. ThinkArduino Uno runs the sketch
  3. ActDS3231 RTC, microSD module

Parts list

Tick anything you already have and the total updates.

PartQtyPrice
  • UNO
    Uno R3 CH340G ATmega328p Compatible Development Board
    GB-SBCD-0329Guide

    The brain of the project

    × 1₹204₹204
  • Arduino USB-A to USB-B Data Cable for UNO/MEGA
    GB-SBCD-0122

    Connects the Uno to your computer to upload code and power it

    × 1₹51₹51
  • Resistor Assortment Kit (30 Values)
    GB-PASV-0002Guide

    Two resistors scale the 5 V adapter output down by 11 so the ESP32 analog pin sees well under 1 V.

    × 1₹33₹33
  • DS3231 Precision RTC Module with EEPROM
    GB-PROT-0005Guide

    Temperature-compensated real-time clock (±2 minutes a year) with a coin-cell backup, so the time survives power cuts.

    × 1₹125₹125
  • DFRobot Fermion MicroSD Card Module – SPI
    SENS-2961

    Stores readings on a microSD card as a CSV file you can open in Excel or Google Sheets.

    × 1₹499₹499
  • SD
    microSD Memory Card Class 10 (16GB)
    GB-PROT-0019-02

    Stores the CSV log (format as FAT32)

    × 1₹412₹412
  • 18650
    18650 Battery Holder
    GB-PWRB-0015Guide

    Backup cell keeps the logger running during the cut

    × 1₹29₹29
  • 18650
    18650 Li-ion Rechargeable Cell 2600mAh
    GB-PWRB-0011-01

    Backup battery

    × 1₹149₹149
  • TP4056 1A Li-ion Charger Module with Protection
    GB-PWRB-0016Guide

    Charges the cell from the adapter

    × 1₹19₹19
  • MT3608 Mini Boost Converter Module
    GB-PWRB-0005Guide

    Raises the cell's 3.0–4.2 V to a steady 5 V for the board

    × 1₹35₹35
  • Solderless Breadboard (830 points)
    GB-PROT-0001Guide

    Holds everything together without soldering

    × 1₹18₹18
  • Dupont Jumper Wires (40 pcs)
    GB-WIRE-0001Guide

    Connects the parts

    × 1₹49₹49

Complete kit

12 of 12 parts in one tap

₹1,623

GST included

3% off these parts while the whole kit stays in your cart

Parts you still need

₹1,623

12 of 12 parts. Tick anything you already have.

About ₹48,690 before bulk pricing for 30 kits.

Request bulk quote

Tools you'll need

  • Digital Multimeter
  • Wire Stripper and Cutter

Learn the parts

  • Atal Tinkering Lab (ATL)
  • I2C Explained
  • Li-ion, 18650 and LiPo Batteries
  • MT3608 boost converter
  • Arduino Uno

Calculators for this build

  • Battery charging time calculator
  • Inverter and battery backup time calculator
  • LiPo C-rating and drone flight time calculator

Wiring

Follow the colours: red is power, dark grey is ground, blue is a signal.

Set the boost converter to 5.0 V with a multimeter before connecting the board. Cell + → TP4056 B+ and TP4056 OUT+ → boost IN+, cell − (TP4056 OUT−) → boost IN−, then boost OUT+ → board 5V pin and OUT− → GND. A bare 18650 (3.0–4.2 V) cannot run a 5 V board by itself.

PartPinConnect toNote
Adapter voltage divider (100 kΩ + 10 kΩ)TOP (100 kΩ leg)external
Adapter voltage divider (100 kΩ + 10 kΩ)MIDA0
Adapter voltage divider (100 kΩ + 10 kΩ)LOWGND
DS3231 RTCVCC5V
DS3231 RTCGNDGND
DS3231 RTCSDAA4
DS3231 RTCSCLA5
microSD moduleVCC5V
microSD moduleGNDGND
microSD moduleMOSID11
microSD moduleMISOD12
microSD moduleSCKD13
microSD moduleCSD10
  • Adapter voltage divider (100 kΩ + 10 kΩ)TOP (100 kΩ leg) → external
  • Adapter voltage divider (100 kΩ + 10 kΩ)MID → A0
  • Adapter voltage divider (100 kΩ + 10 kΩ)LOW → GND
  • DS3231 RTCVCC → 5V
  • DS3231 RTCGND → GND
  • DS3231 RTCSDA → A4
  • DS3231 RTCSCL → A5
  • microSD moduleVCC → 5V
  • microSD moduleGND → GND
  • microSD moduleMOSI → D11
  • microSD moduleMISO → D12
  • microSD moduleSCK → D13
  • microSD moduleCS → D10
Built it? Check your wiring before you power up.Pick the pin each wire went to and we'll point out swapped pins, power mistakes and pins that clash.

Step-by-step build

0 of 9 done

Code

power_cut_logger.inoVerify & upload in Electrolark
// Power cut logger with date and time
// Geekobot project library · board: Arduino Uno
// Wiring diagram, parts list and build steps: Geekobot project page "power-cut-logger"

#include <Wire.h>
#include <RTClib.h>
#include <SPI.h>
#include <SD.h>

// ---- pins ----
const uint8_t VBAT_PIN = A0;
const uint8_t SD_CS = 10;

const int ADC_MAX = 1023;      // 10-bit analog input
const float VREF = 5.0f;

RTC_DS3231 rtc;

// ---- latest readings ----
float adapterV = 0;

const unsigned long LOG_EVERY_MS = 10000UL;   // one row per 10 s
unsigned long lastLog = 0;
bool cardOk = false;

float readBatteryV() { return analogRead(VBAT_PIN) * VREF / ADC_MAX * 11.0f; }   // 100 kΩ : 10 kΩ divider = ÷11

void writeRow() {
  File f = SD.open("LOG.CSV", FILE_WRITE);
  if (!f) { Serial.println(F("Write failed")); return; }
  DateTime t = rtc.now();
  char stamp[20];
  snprintf(stamp, sizeof(stamp), "%04d-%02d-%02d,%02d:%02d:%02d", t.year(), t.month(), t.day(), t.hour(), t.minute(), t.second());
  f.print(stamp);
  f.print(',');
  f.print(adapterV, 2);
  f.println();
  f.close();
}

void setup() {
  Serial.begin(115200);
  if (!rtc.begin()) Serial.println(F("RTC not found"));
  if (rtc.lostPower()) rtc.adjust(DateTime(F(__DATE__), F(__TIME__)));   // set from the upload time
  cardOk = SD.begin(SD_CS);
  Serial.println(cardOk ? F("SD card ready") : F("SD card not found"));
  if (cardOk && !SD.exists("LOG.CSV")) {
  File f = SD.open("LOG.CSV", FILE_WRITE);
  if (f) { f.println(F("date,time,Adapter(V)")); f.close(); }
  }
}

void loop() {
  if (millis() - lastLog < LOG_EVERY_MS && lastLog != 0) return;
  lastLog = millis();
  adapterV = readBatteryV();
  Serial.print(F("Adapter="));
  Serial.print(adapterV, 2);
  Serial.print(F("V"));
  Serial.println();
  if (cardOk) writeRow();
}

Run it: what this code does

The sketch above runs here on a simulated Arduino Uno. Move the sliders for the sensors and buttons it reads, and watch the Serial monitor, display and outputs change.

Troubleshooting

Reading is off by a few percent+

Measure the real resistor values and change 11.0 to (R1 + R2) / R2.

Time resets after power-off+

The coin cell is flat or missing. Some modules need the charging resistor removed when using a CR2032.

"SD card not found"+

Check the card is FAT32, fully inserted, and CS is on the pin in the sketch.

Nothing happens after uploading+

Open the Serial Monitor at 115200 baud and check for messages. Make sure you chose the right board and port in the Arduino IDE.

Upload fails+

Close other programs using the serial port, try another USB cable (some are charge-only) and press reset just before uploading.

FAQ

Can I use an ESP32 instead of the Arduino?+

Yes. Most of the code works unchanged on an ESP32 with the ESP32 board package. Watch for 5 V modules: ESP32 pins are 3.3 V, so 5 V output signals need a resistor divider. Analog readings run 0–4095 instead of 0–1023, which the ADC_MAX constant handles.

How do I power it without a computer?+

Use a 5 V USB phone charger or a power bank into the board's USB port.

What parts do I need to build the power cut logger with date and time?+

12 parts: Uno R3 CH340G ATmega328p Compatible Development Board, Arduino USB-A to USB-B Data Cable for UNO/MEGA, Resistor Assortment Kit (30 Values), DS3231 Precision RTC Module with EEPROM, DFRobot Fermion MicroSD Card Module – SPI, microSD Memory Card Class 10 (16GB), 18650 Battery Holder, 18650 Li-ion Rechargeable Cell 2600mAh, TP4056 1A Li-ion Charger Module with Protection, MT3608 Mini Boost Converter Module, plus 2 more. Tools: Digital Multimeter and Wire Stripper and Cutter. On this page you can tick the parts you already have and add only the rest to your cart.

How hard is it and how long does it take?+

It is a intermediate project and takes about 2 hours. The build on this page has 9 steps.

Do I need to write the code myself?+

No. This page has the complete, tested code (power_cut_logger.ino). Install these libraries first: RTClib and SD.

Can I see what the code does before I build it?+

Yes. The Run it panel under the code runs this exact sketch on a simulated board. Move the sliders or press the buttons for the sensors it reads, and the Serial monitor, display and outputs react as they will on the real build. It is a simulation, so real readings depend on your parts and wiring.

How much does the power cut logger with date and time cost to build?+

About ₹1,623 for the parts at the prices on this page, plus tools if you do not have them. Quantity price breaks lower the cost when you build several.

What will I learn from this project?+

Real-time clocks and backup batteries; SPI devices and CSV logging; Voltage dividers and ADC scaling.

What can I build next with these parts?+

Ideas that reuse this build: Power-cut alarm and Phone dashboard version. They are listed under Take it further on this page.

Take it further

  • Power-cut alarm
  • Phone dashboard version

Related projects

  • Power & solar
    Intermediate· 1–2 hours

    LM317 variable power supply

    Turn a 12 V adapter into an adjustable 1.25–10 V supply for your experiments.

    ₹422 · 10 partsNo code
  • 1865018650
    Power & solar
    Beginner· 1 hour

    DIY 18650 power bank

    Build your own USB power bank and learn how lithium charging works.

    ₹480 · 6 partsNo code
  • 1865018650
    Power & solar
    Intermediate· 1–2 hours

    Solar-charged 18650 power bank

    Free power for outdoor sensors: sunlight in, 5 V USB out.

    ₹648 · 8 partsNo code
  • NANO18650
    Power & solar
    Intermediate· 1–2 hours

    Power-cut alarm with battery backup

    Beeps when the mains goes off at night, so the fridge and the alarm clock do not quietly die.

    ₹559 · 10 partsArduino

Learning project. Check every circuit and the datasheet of each part before you power it up.

Run itChange the inputs and watch the output
2026-11-06,09:30:00,16.51microSD card: LOG.CSV, 9 lines
Serial monitor115200 baud
SD card ready
Adapter=16.45V
Adapter=16.45V
Adapter=16.51V
Adapter=16.51V
Adapter=16.56V
Adapter=16.45V
Adapter=16.51V
Adapter=16.51V

A simulation of the sketch above, so you know what to expect. Real readings vary with your parts and wiring.

Ask the Community

Ask a question Share your build